[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 5 May 2023 19:52:29 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Samin Guo <samin.guo@...rfivetech.com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
netdev@...r.kernel.org, Peter Geis <pgwipeout@...il.com>,
Frank <Frank.Sae@...or-comm.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Yanhong Wang <yanhong.wang@...rfivetech.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: net: motorcomm: Add pad driver
strength cfg
On 05/05/2023 11:05, Samin Guo wrote:
> The motorcomm phy (YT8531) supports the ability to adjust the drive
> strength of the rx_clk/rx_data, the value range of pad driver
> strength is 0 to 7.
>
> Signed-off-by: Samin Guo <samin.guo@...rfivetech.com>
> ---
> .../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> index 157e3bbcaf6f..29a1997a1577 100644
> --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> @@ -52,6 +52,18 @@ properties:
> for a timer.
> type: boolean
>
> + motorcomm,rx-clk-driver-strength:
> + description: drive strength of rx_clk pad.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> + default: 3
No improvements after Andrew's comment.
Best regards,
Krzysztof
Powered by blists - more mailing lists