linux-kernel - Re: [PATCH] virtio_net: set default mtu to 1500 when 'Device maximum MTU' bigger than 1500

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1683526688.7492425-1-xuanzhuo@linux.alibaba.com>
Date:   Mon, 8 May 2023 14:18:08 +0800
From:   Xuan Zhuo <xuanzhuo@...ux.alibaba.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>
Cc:     huangml@...ur.tech, zy@...ur.tech,
        Jason Wang <jasowang@...hat.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        "open list:VIRTIO CORE AND NET DRIVERS" 
        <virtualization@...ts.linux-foundation.org>,
        "open list:NETWORKING DRIVERS" <netdev@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Hao Chen <chenh@...ur.tech>, hengqi@...ux.alibaba.com
Subject: Re: [PATCH] virtio_net: set default mtu to 1500 when 'Device maximum MTU' bigger than 1500

On Mon, 8 May 2023 02:15:46 -0400, "Michael S. Tsirkin" <mst@...hat.com> wrote:
> On Mon, May 08, 2023 at 10:01:59AM +0800, Xuan Zhuo wrote:
> > On Sun, 7 May 2023 04:58:58 -0400, "Michael S. Tsirkin" <mst@...hat.com> wrote:
> > > On Sat, May 06, 2023 at 04:56:35PM +0800, Hao Chen wrote:
> > > >
> > > >
> > > > 在 2023/5/6 10:50, Xuan Zhuo 写道:
> > > > > On Sat,  6 May 2023 10:15:29 +0800, Hao Chen <chenh@...ur.tech> wrote:
> > > > > > When VIRTIO_NET_F_MTU(3) Device maximum MTU reporting is supported.
> > > > > > If offered by the device, device advises driver about the value of its
> > > > > > maximum MTU. If negotiated, the driver uses mtu as the maximum
> > > > > > MTU value. But there the driver also uses it as default mtu,
> > > > > > some devices may have a maximum MTU greater than 1500, this may
> > > > > > cause some large packages to be discarded,
> > > > >
> > > > > You mean tx packet?
> > > > Yes.
> > > > >
> > > > > If yes, I do not think this is the problem of driver.
> > > > >
> > > > > Maybe you should give more details about the discard.
> > > > >
> > > > In the current code, if the maximum MTU supported by the virtio net hardware
> > > > is 9000, the default MTU of the virtio net driver will also be set to 9000.
> > > > When sending packets through "ping -s 5000", if the peer router does not
> > > > support negotiating a path MTU through ICMP packets, the packets will be
> > > > discarded. If the peer router supports negotiating path mtu through ICMP
> > > > packets, the host side will perform packet sharding processing based on the
> > > > negotiated path mtu, which is generally within 1500.
> > > > This is not a bugfix patch, I think setting the default mtu to within 1500
> > > > would be more suitable here.Thanks.
> > >
> > > I don't think VIRTIO_NET_F_MTU is appropriate for support for jumbo packets.
> > > The spec says:
> > > 	The device MUST forward transmitted packets of up to mtu (plus low level ethernet header length) size with
> > > 	gso_type NONE or ECN, and do so without fragmentation, after VIRTIO_NET_F_MTU has been success-
> > > 	fully negotiated.
> > > VIRTIO_NET_F_MTU has been designed for all kind of tunneling devices,
> > > and this is why we set mtu to max by default.
> > >
> > > For things like jumbo frames where MTU might or might not be available,
> > > a new feature would be more appropriate.
> >
> >
> > So for jumbo frame, what is the problem?
> >
> > We are trying to do this. @Heng
> >
> > Thanks.
>
> It is not a problem as such. But VIRTIO_NET_F_MTU will set the
> default MTU not just the maximum one, because spec seems to
> say it can.

I see.

In the case of Jumbo Frame, we also hope that the driver will set the default
directly to the max mtu. Just like what you said "Bigger packets = better
performance."

I don't know, in any scenario, when the hardware supports a large mtu, but we do
not want the user to use it by default. Of course, the scene that this patch
wants to handle does exist, but I have never thought that this is a problem at
the driver level.

Thanks.


>
>
> >
> > >
> > > > > > so I changed the MTU to a more
> > > > > > general 1500 when 'Device maximum MTU' bigger than 1500.
> > > > > >
> > > > > > Signed-off-by: Hao Chen <chenh@...ur.tech>
> > > > > > ---
> > > > > >   drivers/net/virtio_net.c | 5 ++++-
> > > > > >   1 file changed, 4 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > > > > index 8d8038538fc4..e71c7d1b5f29 100644
> > > > > > --- a/drivers/net/virtio_net.c
> > > > > > +++ b/drivers/net/virtio_net.c
> > > > > > @@ -4040,7 +4040,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > > > >   			goto free;
> > > > > >   		}
> > > > > >
> > > > > > -		dev->mtu = mtu;
> > > > > > +		if (mtu > 1500)
> > > > >
> > > > > s/1500/ETH_DATA_LEN/
> > > > >
> > > > > Thanks.
> > > > >
> > > > > > +			dev->mtu = 1500;
> > > > > > +		else
> > > > > > +			dev->mtu = mtu;
> > > > > >   		dev->max_mtu = mtu;
> > > > > >   	}
> > > > > >
> > > > > > --
> > > > > > 2.27.0
> > > > > >
> > >
>