linux-kernel - Re: [PATCH net-next 0/8] Improvements for RealTek 2.5G Ethernet PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <018df89a-c3d2-1bda-9966-7f06b24f87f2@gmail.com>
Date:   Thu, 11 May 2023 07:29:21 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Daniel Golle <daniel@...rotopia.org>, netdev@...r.kernel.org,
        linux-mediatek@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Andrew Lunn <andrew@...n.ch>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Subject: Re: [PATCH net-next 0/8] Improvements for RealTek 2.5G Ethernet PHYs

On 11.05.2023 00:53, Daniel Golle wrote:
> Improve support for RealTek 2.5G Ethernet PHYs (RTL822x series).
> The PHYs can operate with Clause-22 and Clause-45 MDIO.
> 
> When using Clause-45 it is desireable to avoid rate-adapter mode and
> rather have the MAC interface mode follow the PHY speed. The PHYs
> support 2500Base-X for 2500M, and Cisco SGMII for 1000M/100M/10M.
> 
> Also prepare support for proprietary RealTek HiSGMII mode which will
> be needed for situations when used with RealTek switch or router SoCs
> such as RTL839x or RTL93xx.
> 
> Add support for Link Down Power Saving Mode (ALDPS) which is already
> supported for older RTL821x series 1GbE PHYs.
> 
> Make sure that link-partner advertised modes are only used if the
> advertisement can be considered valid. Otherwise we are seeing
> false-positives warning about downscaling eventhough higher speeds
> are not actually advertised by the link partner.
> 
> While at it, use helper function for paged operation and make sure
> to use use locking for that as well.
> 
> Changes since RFC:
>  * Turns out paged read used to identify the PHY needs to be hardcoded
>    for the simple reason that the function pointers for paged operations
>    have not yet been populated at this point. Hence keep open-coding it,
>    but use helper function and make sure it happening while the MDIO bus
>    mutex is locked.
> 
> Alexander Couzens (1):
>   net: phy: realtek: rtl8221: allow to configure SERDES mode
> 
> Chukun Pan (1):
>   net: phy: realtek: switch interface mode for RTL822x series
> 
> Daniel Golle (6):
>   net: phy: realtek: use genphy_soft_reset for 2.5G PHYs
>   net: phy: realtek: disable SGMII in-band AN for 2.5G PHYs
>   net: phy: realtek: make sure paged read is protected by mutex
>   net: phy: realtek: use inline functions for 10GbE advertisement
>   net: phy: realtek: check validity of 10GbE link-partner advertisement
>   net: phy: realtek: setup ALDPS on RTL8221B
> 
>  drivers/net/phy/realtek.c | 161 ++++++++++++++++++++++++++++++++------
>  1 file changed, 138 insertions(+), 23 deletions(-)
> 

Has this series been tested with RTL8125A/B to ensure that the internal
PHY use case still works?