linux-kernel - [PATCH v4 3/6] phy: cadence: salvo: add bist fix

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230516154329.3155031-4-Frank.Li@nxp.com>
Date:   Tue, 16 May 2023 11:43:26 -0400
From:   Frank Li <Frank.Li@....com>
To:     frank.li@....com, vkoul@...nel.org
Cc:     devicetree@...r.kernel.org, fushi.peng@....com,
        imx@...ts.linux.dev, kernel@...gutronix.de, kishon@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-phy@...ts.infradead.org, robh+dt@...nel.org,
        s.hauer@...gutronix.de, shawnguo@...nel.org
Subject: [PATCH v4 3/6] phy: cadence: salvo: add bist fix

From: Peter Chen <peter.chen@....com>

Very limited parts may fail to work on full speed mode (both host and
device modes) for USB3 port due to higher threshold in full speed receiver
of USB2.0 PHY.

One example failure symptom is, the enumeration is failed when connecting
full speed USB mouse to USB3 port, especially under high temperature.

The workaround is to configure threshold voltage value of single ended
receiver by setting USB2.0 PHY register AFE_RX_REG5[2:0] to 3'b101.

Signed-off-by: Peter Chen <peter.chen@....com>
---
 drivers/phy/cadence/phy-cadence-salvo.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 2e3d4d8fb8eb..b9866dc146ce 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -91,6 +91,7 @@
 
 /* USB2 PHY register definition */
 #define UTMI_REG15				0xaf
+#define UTMI_AFE_RX_REG5			0x12
 
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
@@ -247,6 +248,8 @@ static int cdns_salvo_phy_init(struct phy *phy)
 	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_REG15,
 			 value | TXVALID_GATE_THRESHOLD_HS_0US);
 
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5,
+			 0x5);
 	udelay(10);
 
 	clk_disable_unprepare(salvo_phy->clk);
-- 
2.34.1