linux-kernel - [PATCH v4 4/6] phy: cadence: salvo: add .set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230516154329.3155031-5-Frank.Li@nxp.com>
Date:   Tue, 16 May 2023 11:43:27 -0400
From:   Frank Li <Frank.Li@....com>
To:     frank.li@....com, vkoul@...nel.org
Cc:     devicetree@...r.kernel.org, fushi.peng@....com,
        imx@...ts.linux.dev, kernel@...gutronix.de, kishon@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-phy@...ts.infradead.org, robh+dt@...nel.org,
        s.hauer@...gutronix.de, shawnguo@...nel.org
Subject: [PATCH v4 4/6] phy: cadence: salvo: add .set_mode API

From: Peter Chen <peter.chen@....com>

For NXP platform design, the PHY can't know VBUS well, it causes the FSM
in controller seeing the disconnection at L1 use case. With .set_mode API
introduced, the controller driver could force PHY seeing B Session VALID
when it is at the device mode (VBUS is there), and keep FSM working well.

Signed-off-by: Peter Chen <peter.chen@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
 drivers/phy/cadence/phy-cadence-salvo.c | 29 +++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index b9866dc146ce..41616f786321 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -92,6 +92,7 @@
 /* USB2 PHY register definition */
 #define UTMI_REG15				0xaf
 #define UTMI_AFE_RX_REG5			0x12
+#define UTMI_AFE_BC_REG4			0x29
 
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
@@ -105,6 +106,9 @@
 /* 0us, txvalid is ready just after HS/FS transmitters have powered up */
 #define TXVALID_GATE_THRESHOLD_HS_0US		(BIT(4) | BIT(5))
 
+#define SET_B_SESSION_VALID			(BIT(6) | BIT(5))
+#define CLR_B_SESSION_VALID			(BIT(6))
+
 struct cdns_reg_pairs {
 	u16 val;
 	u32 off;
@@ -124,6 +128,13 @@ struct cdns_salvo_phy {
 };
 
 static const struct of_device_id cdns_salvo_phy_of_match[];
+static const struct cdns_salvo_data cdns_nxp_salvo_data;
+
+static bool cdns_is_nxp_phy(struct cdns_salvo_phy *salvo_phy)
+{
+	return salvo_phy->data == &cdns_nxp_salvo_data;
+}
+
 static u16 cdns_salvo_read(struct cdns_salvo_phy *salvo_phy, u32 offset, u32 reg)
 {
 	return (u16)readl(salvo_phy->base + offset +
@@ -273,11 +284,29 @@ static int cdns_salvo_phy_power_off(struct phy *phy)
 	return 0;
 }
 
+static int cdns_salvo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct cdns_salvo_phy *salvo_phy = phy_get_drvdata(phy);
+
+	if (!cdns_is_nxp_phy(salvo_phy))
+		return 0;
+
+	if (mode == PHY_MODE_INVALID)
+		cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+			 CLR_B_SESSION_VALID);
+	else if (mode == PHY_MODE_USB_DEVICE)
+		cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+			 SET_B_SESSION_VALID);
+
+	return 0;
+}
+
 static const struct phy_ops cdns_salvo_phy_ops = {
 	.init		= cdns_salvo_phy_init,
 	.power_on	= cdns_salvo_phy_power_on,
 	.power_off	= cdns_salvo_phy_power_off,
 	.owner		= THIS_MODULE,
+	.set_mode	= cdns_salvo_set_mode,
 };
 
 static int cdns_salvo_phy_probe(struct platform_device *pdev)
-- 
2.34.1