[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZGd7/FGJVi6lDk8F@chq-MS-7D45>
Date: Fri, 19 May 2023 21:39:08 +0800
From: Cai Huoqing <cai.huoqing@...ux.dev>
To: Vinod Koul <vkoul@...nel.org>
Cc: Serge Semin <fancer.lancer@...il.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Jingoo Han <jingoohan1@...il.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
linux-kernel@...r.kernel.org, dmaengine@...r.kernel.org,
linux-pci@...r.kernel.org
Subject: Re: [PATCH v10 0/4] dmaengine: dw-edma: Add support for native HDMA
On 19 5月 23 16:57:06, Vinod Koul wrote:
> On 17-05-23, 11:01, Cai Huoqing wrote:
> > Add support for HDMA NATIVE, as long the IP design has set
> > the compatible register map parameter-HDMA_NATIVE,
> > which allows compatibility for native HDMA register configuration.
> >
> > The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
> > And the native HDMA registers are different from eDMA,
> > so this patch add support for HDMA NATIVE mode.
> >
> > HDMA write and read channels operate independently to maximize
> > the performance of the HDMA read and write data transfer over
> > the link When you configure the HDMA with multiple read channels,
> > then it uses a round robin (RR) arbitration scheme to select
> > the next read channel to be serviced.The same applies when
> > youhave multiple write channels.
> >
> > The native HDMA driver also supports a maximum of 16 independent
> > channels (8 write + 8 read), which can run simultaneously.
> > Both SAR (Source Address Register) and DAR (Destination Address Register)
> > are aligned to byte.
> >
> > Cai Huoqing (1):
> > dmaengine: dw-edma: Add support for native HDMA
> >
> > Cai huoqing (3):
> > dmaengine: dw-edma: Rename dw_edma_core_ops structure to
> > dw_edma_plat_ops
> > dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
> > abstract controller operation
> > dmaengine: dw-edma: Add HDMA DebugFS support
>
> You should have a single name for all these patches :-(
Hi Vinod,
Thanks for your reply.
Do you mean patch[0/4] and patch[3/4] shouldn't have the same name?
Thanks,
Cai-
>
> >
> > Tested-by: Serge Semin <fancer.lancer@...il.com>
> >
> > v9->v10:
> > 1.Update commit log.
> > 2.rebase for dma-next
> >
> > v9 link:
> > https://lore.kernel.org/lkml/20230413033156.93751-1-cai.huoqing@linux.dev/
> >
> > drivers/dma/dw-edma/Makefile | 8 +-
> > drivers/dma/dw-edma/dw-edma-core.c | 86 ++----
> > drivers/dma/dw-edma/dw-edma-core.h | 58 ++++
> > drivers/dma/dw-edma/dw-edma-pcie.c | 4 +-
> > drivers/dma/dw-edma/dw-edma-v0-core.c | 85 +++++-
> > drivers/dma/dw-edma/dw-edma-v0-core.h | 14 +-
> > drivers/dma/dw-edma/dw-hdma-v0-core.c | 296 +++++++++++++++++++
> > drivers/dma/dw-edma/dw-hdma-v0-core.h | 17 ++
> > drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 170 +++++++++++
> > drivers/dma/dw-edma/dw-hdma-v0-debugfs.h | 22 ++
> > drivers/dma/dw-edma/dw-hdma-v0-regs.h | 129 ++++++++
> > drivers/pci/controller/dwc/pcie-designware.c | 2 +-
> > include/linux/dma/edma.h | 7 +-
> > 13 files changed, 807 insertions(+), 91 deletions(-)
> > create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
> > create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
> > create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
> > create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
> > create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
> >
> > --
> > 2.34.1
>
> --
> ~Vinod
Powered by blists - more mailing lists