| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMZ6Rq+V4HRLa2bzADnsvaKHuCwi6O5jKo39mhon_+OnMDEJbQ@mail.gmail.com>
Date: Sun, 21 May 2023 18:16:13 +0900
From: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
To: Frank Jungclaus <frank.jungclaus@....eu>
Cc: linux-can@...r.kernel.org, Marc Kleine-Budde <mkl@...gutronix.de>,
Wolfgang Grandegger <wg@...ndegger.com>,
Stefan Mätje <stefan.maetje@....eu>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/6] can: esd_usb: Make use of existing kernel macros
Thanks for the patch.
On Sat. 20 May 2023 at 04:57, Frank Jungclaus <frank.jungclaus@....eu> wrote:
> Make use of existing kernel macros:
> - Use the unit suffixes from linux/units.h for the controller clock
> frequencies
> - Use the BIT() and the GENMASK() macro to set specific bits in some
> constants
> - Use CAN_MAX_DLEN (instead of directly using the value 8) for the
> maximum CAN payload length
>
> Additionally:
> - Spend some commenting for the previously changed constants
> - Add the current year to the copyright notice
> - While adding the header linux/units.h to the list of include files
> also sort that list alphabetically
>
> Suggested-by: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
> Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/
> Link: https://lore.kernel.org/all/CAMZ6RqKdg5YBufa0C+ttzJvoG=9yuti-8AmthCi4jBbd08JEtw@mail.gmail.com/
> Suggested-by: Marc Kleine-Budde <mkl@...gutronix.de>
> Link: https://lore.kernel.org/all/20230518-grower-film-ea8b5f853f3e-mkl@pengutronix.de/
> Signed-off-by: Frank Jungclaus <frank.jungclaus@....eu>
> ---
> drivers/net/can/usb/esd_usb.c | 40 ++++++++++++++++++-----------------
> 1 file changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> index d33bac3a6c10..32354cfdf151 100644
> --- a/drivers/net/can/usb/esd_usb.c
> +++ b/drivers/net/can/usb/esd_usb.c
> @@ -3,19 +3,20 @@
> * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro
> *
> * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@....eu>
> - * Copyright (C) 2022 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@....eu>
> + * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@....eu>
> */
> +#include <linux/can.h>
> +#include <linux/can/dev.h>
> +#include <linux/can/error.h>
> +
> #include <linux/ethtool.h>
> -#include <linux/signal.h>
> -#include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/netdevice.h>
> +#include <linux/signal.h>
> +#include <linux/slab.h>
> +#include <linux/units.h>
> #include <linux/usb.h>
>
> -#include <linux/can.h>
> -#include <linux/can/dev.h>
> -#include <linux/can/error.h>
> -
> MODULE_AUTHOR("Matthias Fuchs <socketcan@....eu>");
> MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@....eu>");
> MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces");
> @@ -27,8 +28,8 @@ MODULE_LICENSE("GPL v2");
> #define USB_CANUSBM_PRODUCT_ID 0x0011
>
> /* CAN controller clock frequencies */
> -#define ESD_USB2_CAN_CLOCK 60000000
> -#define ESD_USBM_CAN_CLOCK 36000000
> +#define ESD_USB2_CAN_CLOCK (60 * MEGA) /* Hz */
> +#define ESD_USBM_CAN_CLOCK (36 * MEGA) /* Hz */
>
> /* Maximum number of CAN nets */
> #define ESD_USB_MAX_NETS 2
> @@ -42,20 +43,21 @@ MODULE_LICENSE("GPL v2");
> #define CMD_IDADD 6 /* also used for IDADD_REPLY */
>
> /* esd CAN message flags - dlc field */
> -#define ESD_RTR 0x10
> +#define ESD_RTR BIT(4)
> +
>
> /* esd CAN message flags - id field */
> -#define ESD_EXTID 0x20000000
> -#define ESD_EVENT 0x40000000
> -#define ESD_IDMASK 0x1fffffff
> +#define ESD_EXTID BIT(29)
> +#define ESD_EVENT BIT(30)
> +#define ESD_IDMASK GENMASK(28, 0)
>
> /* esd CAN event ids */
> #define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */
>
> /* baudrate message flags */
> -#define ESD_USB_UBR 0x80000000
> -#define ESD_USB_LOM 0x40000000
> -#define ESD_USB_NO_BAUDRATE 0x7fffffff
> +#define ESD_USB_LOM BIT(30) /* 0x40000000, Listen Only Mode */
> +#define ESD_USB_UBR BIT(31) /* 0x80000000, User Bit Rate (controller BTR) in bits 0..27 */
^^^^^^^^^^
As pointented by Marc, no need for redundant comment with the hexadecimal value.
> +#define ESD_USB_NO_BAUDRATE GENMASK(30, 0) /* bit rate unconfigured */
>
> /* bit timing CAN-USB/2 */
> #define ESD_USB2_TSEG1_MIN 1
> @@ -70,7 +72,7 @@ MODULE_LICENSE("GPL v2");
> #define ESD_USB2_BRP_MIN 1
> #define ESD_USB2_BRP_MAX 1024
> #define ESD_USB2_BRP_INC 1
> -#define ESD_USB2_3_SAMPLES 0x00800000
> +#define ESD_USB2_3_SAMPLES BIT(23)
>
> /* esd IDADD message */
> #define ESD_ID_ENABLE 0x80
> @@ -128,7 +130,7 @@ struct rx_msg {
> __le32 ts;
> __le32 id; /* upper 3 bits contain flags */
> union {
> - u8 data[8];
> + u8 data[CAN_MAX_DLEN];
> struct {
> u8 status; /* CAN Controller Status */
> u8 ecc; /* Error Capture Register */
> @@ -145,7 +147,7 @@ struct tx_msg {
> u8 dlc;
> u32 hnd; /* opaque handle, not used by device */
> __le32 id; /* upper 3 bits contain flags */
> - u8 data[8];
> + u8 data[CAN_MAX_DLEN];
> };
>
> struct tx_done_msg {
> --
> 2.25.1
>
Powered by blists - more mailing lists