[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230523064310.3005-6-wsa+renesas@sang-engineering.com>
Date: Tue, 23 May 2023 08:43:10 +0200
From: Wolfram Sang <wsa+renesas@...g-engineering.com>
To: linux-renesas-soc@...r.kernel.org
Cc: Johan Hovold <johan@...nel.org>, linux-kernel@...r.kernel.org,
Wolfram Sang <wsa+renesas@...g-engineering.com>
Subject: [RFC PATCH 5/5] arm64: dts: renesas: ulcb-kf: add node for GPS
Add the node for the GPS receiver and remove flow control for SCIF1
which is not present. The schematics are a bit misleading. The pins are
sometimes named SCIF1 but they are for HSCIF1.
Signed-off-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index efc80960380f..f6705cad78e4 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -367,7 +367,7 @@ hscif0_pins: hscif0 {
};
scif1_pins: scif1 {
- groups = "scif1_data_b", "scif1_ctrl";
+ groups = "scif1_data_b";
function = "scif1";
};
@@ -397,9 +397,14 @@ &sound_clk_pins
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
- uart-has-rtscts;
status = "okay";
+
+ gnss {
+ compatible = "u-blox,neo-m8";
+ reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>;
+ current-speed = <9600>;
+ };
};
&sdhi3 {
--
2.35.1
Powered by blists - more mailing lists