[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230524133918.1439516-9-olivier.moysan@foss.st.com>
Date: Wed, 24 May 2023 15:39:17 +0200
From: Olivier Moysan <olivier.moysan@...s.st.com>
To: Marek Vasut <marex@...x.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>
CC: Olivier Moysan <olivier.moysan@...s.st.com>,
<kernel@...electronics.com>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 8/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
Use STM32 ADC generic bindings instead of legacy bindings on
DHCOR Testbench board.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Signed-off-by: Olivier Moysan <olivier.moysan@...s.st.com>
---
.../boot/dts/stm32mp15xx-dhcor-testbench.dtsi | 28 ++++++++++++++++---
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
index faed31b6d84a..ab7f0ba49639 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
@@ -41,15 +41,35 @@ &adc {
status = "okay";
adc1: adc@0 {
- st,adc-channels = <0 1 6>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ };
};
adc2: adc@100 {
- st,adc-channels = <0 1 2>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@2 {
+ reg = <2>;
+ st,min-sample-time-ns = <5000>;
+ };
};
};
--
2.25.1
Powered by blists - more mailing lists