[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230526-revert-bad-binding-v1-1-67329ad1bd80@linaro.org>
Date: Fri, 26 May 2023 09:27:16 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Inki Dae <inki.dae@...sung.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags
optional"
This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
without review due to a bad tool manipulation.
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
.../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index 360fea81f4b6..9f61ebdfefa8 100644
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -70,9 +70,7 @@ properties:
samsung,burst-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- DSIM high speed burst mode frequency when connected to devices
- that support burst mode. If absent, the driver will use the pixel
- clock from the attached device or bridge.
+ DSIM high speed burst mode frequency.
samsung,esc-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -82,8 +80,7 @@ properties:
samsung,pll-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- DSIM oscillator clock frequency. If absent, the driver will
- use the clock frequency of sclk_mipi.
+ DSIM oscillator clock frequency.
phys:
maxItems: 1
@@ -137,7 +134,9 @@ required:
- compatible
- interrupts
- reg
+ - samsung,burst-clock-frequency
- samsung,esc-clock-frequency
+ - samsung,pll-clock-frequency
allOf:
- $ref: ../dsi-controller.yaml#
---
base-commit: cfaf76d349837f695c8aa6d7077847fec4231fe5
change-id: 20230526-revert-bad-binding-f77a3ca96419
Best regards,
--
Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists