[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230526-oppressor-cabbie-fd5332dbc2cc@wendy>
Date: Fri, 26 May 2023 09:02:12 +0100
From: Conor Dooley <conor.dooley@...rochip.com>
To: Neil Armstrong <neil.armstrong@...aro.org>
CC: Inki Dae <inki.dae@...sung.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some
flags optional"
On Fri, May 26, 2023 at 09:27:16AM +0200, Neil Armstrong wrote:
> This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
> without review due to a bad tool manipulation.
Is it a dt-binding maintainer review that you are missing on that
patch?
For this one:
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
Thanks,
Conor.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> .../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml | 9 ++++-----
> 1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> index 360fea81f4b6..9f61ebdfefa8 100644
> --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> @@ -70,9 +70,7 @@ properties:
> samsung,burst-clock-frequency:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> - DSIM high speed burst mode frequency when connected to devices
> - that support burst mode. If absent, the driver will use the pixel
> - clock from the attached device or bridge.
> + DSIM high speed burst mode frequency.
>
> samsung,esc-clock-frequency:
> $ref: /schemas/types.yaml#/definitions/uint32
> @@ -82,8 +80,7 @@ properties:
> samsung,pll-clock-frequency:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
> - DSIM oscillator clock frequency. If absent, the driver will
> - use the clock frequency of sclk_mipi.
> + DSIM oscillator clock frequency.
>
> phys:
> maxItems: 1
> @@ -137,7 +134,9 @@ required:
> - compatible
> - interrupts
> - reg
> + - samsung,burst-clock-frequency
> - samsung,esc-clock-frequency
> + - samsung,pll-clock-frequency
>
> allOf:
> - $ref: ../dsi-controller.yaml#
>
> ---
> base-commit: cfaf76d349837f695c8aa6d7077847fec4231fe5
> change-id: 20230526-revert-bad-binding-f77a3ca96419
>
> Best regards,
> --
> Neil Armstrong <neil.armstrong@...aro.org>
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists