linux-kernel - [PATCH v2 4/4] md/raid10: fix io loss while replacement replace rdev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230526074551.669792-5-linan666@huaweicloud.com>
Date:   Fri, 26 May 2023 15:45:51 +0800
From:   linan666@...weicloud.com
To:     song@...nel.org, bingjingc@...ology.com, allenpeng@...ology.com,
        alexwu@...ology.com, shli@...com, neilb@...e.de
Cc:     linux-raid@...r.kernel.org, linux-kernel@...r.kernel.org,
        linan122@...wei.com, yukuai3@...wei.com, yi.zhang@...wei.com,
        houtao1@...wei.com, yangerkun@...wei.com
Subject: [PATCH v2 4/4] md/raid10: fix io loss while replacement replace rdev

From: Li Nan <linan122@...wei.com>

When we remove a disk which has replacement, first set rdev to NULL
and then set replacement to rdev, finally set replacement to NULL (see
raid10_remove_disk()). If io is submitted during the same time, it might
read both rdev and replacement as NULL, and io will not be submitted.

  rdev -> NULL
			read rdev
  replacement -> NULL
			read replacement

Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.

Fixes: 475b0321a4df ("md/raid10: writes should get directed to replacement as well as original.")
Signed-off-by: Li Nan <linan122@...wei.com>
Reviewed-by: Yu Kuai <yukuai3@...wei.com>
---
 drivers/md/raid10.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index aa22782a7330..88e4bae15143 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -779,8 +779,16 @@ static struct md_rdev *read_balance(struct r10conf *conf,
 		disk = r10_bio->devs[slot].devnum;
 		rdev = rcu_dereference(conf->mirrors[disk].replacement);
 		if (rdev == NULL || test_bit(Faulty, &rdev->flags) ||
-		    r10_bio->devs[slot].addr + sectors > rdev->recovery_offset)
+		    r10_bio->devs[slot].addr + sectors >
+		    rdev->recovery_offset) {
+			/*
+			 * Read replacement first to prevent reading both rdev
+			 * and replacement as NULL during replacement replace
+			 * rdev.
+			 */
+			smp_mb();
 			rdev = rcu_dereference(conf->mirrors[disk].rdev);
+		}
 		if (rdev == NULL ||
 		    test_bit(Faulty, &rdev->flags))
 			continue;
@@ -1479,9 +1487,15 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
 
 	for (i = 0;  i < conf->copies; i++) {
 		int d = r10_bio->devs[i].devnum;
-		struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev);
-		struct md_rdev *rrdev = rcu_dereference(
-			conf->mirrors[d].replacement);
+		struct md_rdev *rdev, *rrdev;
+
+		rrdev = rcu_dereference(conf->mirrors[d].replacement);
+		/*
+		 * Read replacement first to Prevent reading both rdev and
+		 * replacement as NULL during replacement replace rdev.
+		 */
+		smp_mb();
+		rdev = rcu_dereference(conf->mirrors[d].rdev);
 		if (rdev == rrdev)
 			rrdev = NULL;
 		if (rdev && (test_bit(Faulty, &rdev->flags)))
-- 
2.31.1