[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230602072138-mutt-send-email-mst@kernel.org>
Date: Fri, 2 Jun 2023 07:29:10 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Alvaro Karsz <alvaro.karsz@...id-run.com>
Cc: "jasowang@...hat.com" <jasowang@...hat.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"kuba@...nel.org" <kuba@...nel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>,
"virtualization@...ts.linux-foundation.org"
<virtualization@...ts.linux-foundation.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"xuanzhuo@...ux.alibaba.com" <xuanzhuo@...ux.alibaba.com>
Subject: Re: [RFC PATCH net 0/3] virtio-net: allow usage of small vrings
On Mon, May 01, 2023 at 11:41:44AM +0000, Alvaro Karsz wrote:
> > > > Why the difference?
> > > >
> > >
> > > Because the RING_SIZE < 4 case requires much more adjustments.
> > >
> > > * We may need to squeeze the virtio header into the headroom.
> > > * We may need to squeeze the GSO header into the headroom, or block the features.
> >
> > We alread do this though no?
> > I think we'll need to tweak hard_header_len to guarantee it's there
> > as opposed to needed_headroom ...
> >
> > > * At the moment, without NETIF_F_SG, we can receive a skb with 2 segments, we may need to reduce it to 1.
> >
> > You are saying clearing NETIF_F_SG does not guarantee a linear skb?
> >
>
> I don't know..
> I'm not sure what is the cause, but using this patchset, without any host GSO feature, I can get a chain of 3 descriptors.
> Posing an example of a 4 entries ring during iperf3, acting as a client:
> (TX descriptors)
>
> len=86 flags 0x1 addr 0xf738d000
> len=1448 flags 0x0 addr 0xf738d800
> len=86 flags 0x8081 addr 0xf738e000
> len=1184, flags 0x8081 addr 0xf738e800
> len=264 flags 0x8080 addr 0xf738f000
> len=86 flags 0x8081 addr 0xf738f800
> len=1448 flags 0x0 addr 0xf7390000
> len=86 flags 0x1 addr 0xf7390800
> len=1448 flags 0x0 addr 0xf7391000
> len=86 flags 0x1 addr 0xf716a800
> len=1448 flags 0x8080 addr 0xf716b000
> len=86 flags 0x8081 addr 0xf7391800
> len=1448 flags 0x8080 addr 0xf7392000
>
> We got a chain of 3 in here.
> This happens often.
>
> Now, when negotiating host GSO features, I can get up to 4:
>
> len=86 flags 0x1 addr 0xf71fc800
> len=21328 flags 0x1 addr 0xf6e00800
> len=32768 flags 0x8081 addr 0xf6e06000
> len=11064 flags 0x8080 addr 0xf6e0e000
> len=86 flags 0x8081 addr 0xf738b000
> len=1 flags 0x8080 addr 0xf738b800
> len=86 flags 0x1 addr 0xf738c000
> len=21704 flags 0x1 addr 0xf738c800
> len=32768 flags 0x1 addr 0xf7392000
> len=10688 flags 0x0 addr 0xf739a000
> len=86 flags 0x8081 addr 0xf739d000
> len=22080 flags 0x8081 addr 0xf739d800
> len=32768 flags 0x8081 addr 0xf73a3000
> len=10312 flags 0x8080 addr 0xf73ab000
>
> TBH, I thought that this behaviour was expected until you mentioned it,
> This is why virtnet_calc_max_descs returns 3 if no host_gso feature is negotiated, and 4 otherwise.
> I was thinking that we may need to use another skb to hold the TSO template (for headers generation)...
>
> Any ideas?
Something's wrong with the code apparently. Want to try sticking
printk's in the driver to see what is going on?
Documentation/networking/netdev-features.rst says:
Those features say that ndo_start_xmit can handle fragmented skbs:
NETIF_F_SG --- paged skbs (skb_shinfo()->frags), NETIF_F_FRAGLIST ---
chained skbs (skb->next/prev list).
of course we can always linearize if we want to ...
> > > * We may need to change all the control commands, so class, command and command specific data will fit in a single segment.
> > > * We may need to disable the control command and all the features depending on it.
> >
> > well if we don't commands just fail as we can't add them right?
> > no corruption or stalls ...
> >
> > > * We may need to disable NAPI?
> >
> > hmm why napi?
> >
>
> I'm not sure if it's required to disable it, but I'm not sure what's the point having napi if the ring size is 1..
> Will it work?
Not much point in it but it's simpler to just keep things consistent.
> > > There may be more changes..
> > >
> > > I was thinking that it may be easier to start with the easier case RING_SIZE >= 4, make sure everything is working fine, then send a follow up patchset with the required adjustments for RING_SIZE < 4.
> >
> >
> > it's ok but I'm just trying to figure out where does 4 come from.
> >
>
> I guess this part was not clear, sorry..
> In case of split vqs, we have ring size 2 before 4.
> And as you saw, we still get chains of 3 when NETIF_F_SG is off (Which I thought was expected).
>
Worth figuring out where do these come from.
--
MST
Powered by blists - more mailing lists