linux-kernel - Re: [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <894a5ed1-71aa-d9ef-1301-54f4e3583cf3@linaro.org>
Date:   Fri, 2 Jun 2023 15:17:41 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        andersson@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org
Cc:     johan+linaro@...nel.org, agross@...nel.org,
        konrad.dybcio@...aro.org, mturquette@...libre.com,
        sboyd@...nel.org, conor+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for
 SC8280XP

Resending as my previous email probably got lost. If you got it twice,
apologies.

On 25/05/2023 14:29, Srinivas Kandagatla wrote:
> Add support for the lpass clock controller found on SC8280XP based devices.
> This would allow lpass peripheral loader drivers to control the clocks and
> bring the subsystems out of reset.
> 
> Currently this patch only supports resets as the Q6DSP is in control of
> LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
> channel.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
>  drivers/clk/qcom/Kconfig            |  8 ++++
>  drivers/clk/qcom/Makefile           |  1 +
>  drivers/clk/qcom/lpasscc-sc8280xp.c | 63 +++++++++++++++++++++++++++++
>  3 files changed, 72 insertions(+)
>  create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 85869e7a9f16..e25993abb519 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -523,6 +523,14 @@ config SC_LPASSCC_7280
>  	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
>  	  controller to reset the LPASS subsystem.
>  
> +config SC_LPASSCC_8280XP
> +	tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"

depends on ARM64 || COMPILE_TEST

Best regards,
Krzysztof