[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0555c089-9d0d-7d19-9646-f0f9b8630d12@quicinc.com>
Date: Wed, 7 Jun 2023 13:40:22 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: Kalle Valo <kvalo@...nel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<jassisinghbrar@...il.com>, <mathieu.poirier@...aro.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<quic_eberman@...cinc.com>, <quic_mojha@...cinc.com>,
<loic.poulain@...aro.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<quic_srichara@...cinc.com>, <quic_sjaganat@...cinc.com>,
<quic_kathirav@...cinc.com>, <quic_anusha@...cinc.com>,
<quic_poovendh@...cinc.com>, <quic_varada@...cinc.com>,
<quic_devipriy@...cinc.com>
Subject: Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for
multipd model
On 6/6/2023 7:19 PM, Kalle Valo wrote:
> Manikanta Mylavarapu <quic_mmanikan@...cinc.com> writes:
>
>>>>>> +
>>>>>> + properties:
>>>>>> + compatible:
>>>>>> + enum:
>>>>>> + - qcom,ipq5018-wcss-ahb-mpd
>>>>>> + - qcom,ipq9574-wcss-ahb-mpd
>>>>>> + - qcom,ipq5018-wcss-pcie-mpd
>>>>>
>>>>> Keep rather alphabetical order (so both 5018 together).
>>>>>
>>>>> I also do not understand these at all. Why adding bus type to
>>>>> compatible? This rarely is allowed (unless it is PCIe controller within
>>>>> soc).
>>>>>
>>>> IPQ5018 SOC has in-built PCIE controller. Here QDSP6 will bring up
>>>> external(PCIE) and internal (AHB) wifi radio's. To separate AHB, PCIE
>>>> radio's properties, i have added bus type to compatible.
>>>
>>> It's the same device - WCSS - right? We do not create multiple nodes and
>>> compatibles for the same devices. Bus suffixes are almost never parts of
>>> compatibles.
>>
>>
>> No it's not the same device. WCSS on inside IPQ5018 and WCSS attached
>> via pcie to IPQ5018. Here QDSP6 managing both WCSS's.
>>
>> So for better clarity i will use attached SOC ID in compatible.
>> Below are the new compatible's.
>>
>> - qcom,ipq5018-wcss-mpd //IPQ5018 internal radio
>> - qcom,ipq9574-wcss-mpd //IPQ9574 internal radio
>> - qcom,qcn6122-wcss-mpd //IPQ5018 attached radio
>
> What mandates that there's just one QCN6122 device attached to PCI?
> Assuming fixed PCI configurations like that makes me worried.
>
IPQ5018 always has one internal radio, attached pcie radio's depends on
no of pcie ports. IPQ5018 has 2 pcie ports, so it supports max two
qcn6122 devices. One compatible (qcom,qcn6122-wcss-mpd) itself support's
number of pcie devices controlled by QDSP6.
Thanks & Regards,
Manikanta.
Powered by blists - more mailing lists