[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5f9cc367-eaa5-4c19-4e5e-7052b0259ccf@linaro.org>
Date: Wed, 7 Jun 2023 10:27:55 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>,
Kalle Valo <kvalo@...nel.org>
Cc: agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, jassisinghbrar@...il.com,
mathieu.poirier@...aro.org, mturquette@...libre.com,
sboyd@...nel.org, quic_eberman@...cinc.com, quic_mojha@...cinc.com,
loic.poulain@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-remoteproc@...r.kernel.org, linux-clk@...r.kernel.org,
quic_srichara@...cinc.com, quic_sjaganat@...cinc.com,
quic_kathirav@...cinc.com, quic_anusha@...cinc.com,
quic_poovendh@...cinc.com, quic_varada@...cinc.com,
quic_devipriy@...cinc.com
Subject: Re: [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for
multipd model
On 07/06/2023 10:10, Manikanta Mylavarapu wrote:
>
>
> On 6/6/2023 7:19 PM, Kalle Valo wrote:
>> Manikanta Mylavarapu <quic_mmanikan@...cinc.com> writes:
>>
>>>>>>> +
>>>>>>> + properties:
>>>>>>> + compatible:
>>>>>>> + enum:
>>>>>>> + - qcom,ipq5018-wcss-ahb-mpd
>>>>>>> + - qcom,ipq9574-wcss-ahb-mpd
>>>>>>> + - qcom,ipq5018-wcss-pcie-mpd
>>>>>>
>>>>>> Keep rather alphabetical order (so both 5018 together).
>>>>>>
>>>>>> I also do not understand these at all. Why adding bus type to
>>>>>> compatible? This rarely is allowed (unless it is PCIe controller within
>>>>>> soc).
>>>>>>
>>>>> IPQ5018 SOC has in-built PCIE controller. Here QDSP6 will bring up
>>>>> external(PCIE) and internal (AHB) wifi radio's. To separate AHB, PCIE
>>>>> radio's properties, i have added bus type to compatible.
>>>>
>>>> It's the same device - WCSS - right? We do not create multiple nodes and
>>>> compatibles for the same devices. Bus suffixes are almost never parts of
>>>> compatibles.
>>>
>>>
>>> No it's not the same device. WCSS on inside IPQ5018 and WCSS attached
>>> via pcie to IPQ5018. Here QDSP6 managing both WCSS's.
>>>
>>> So for better clarity i will use attached SOC ID in compatible.
>>> Below are the new compatible's.
>>>
>>> - qcom,ipq5018-wcss-mpd //IPQ5018 internal radio
>>> - qcom,ipq9574-wcss-mpd //IPQ9574 internal radio
>>> - qcom,qcn6122-wcss-mpd //IPQ5018 attached radio
>>
>> What mandates that there's just one QCN6122 device attached to PCI?
>> Assuming fixed PCI configurations like that makes me worried.
>>
>
> IPQ5018 always has one internal radio, attached pcie radio's depends on
> no of pcie ports. IPQ5018 has 2 pcie ports, so it supports max two
> qcn6122 devices. One compatible (qcom,qcn6122-wcss-mpd) itself support's
> number of pcie devices controlled by QDSP6.
So this is hot-pluggable (or at least board-pluggable), then should not
be a part of static DTS.
Some concepts of virtual-processes is anyway far away from hardware
description, thus does not fit into DTS. Adding now to the equation PCIe
with variable number of such processes, brings us even further.
This is not a DT property. Remember - DT describes hardware.
Best regards,
Krzysztof
Powered by blists - more mailing lists