[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230613113808.mqasva7fuoxuurab@soft-dev3-1>
Date: Tue, 13 Jun 2023 13:38:08 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <richardcochran@...il.com>
Subject: Re: [PATCH net-next v2 0/2] net: micrel: Change how to read TX
timestamp
The 06/13/2023 11:45, Horatiu Vultur wrote:
Argh... I forgot add Richard to this thread. Therefore CC him now.
> Change how to read the timestamp of the received frames. Currently it is
> required to read over the MDIO bus each of the timestamps but it is
> possible to change to receive the timestamp (the nanosecond part and the
> least significant two bits of the second) in the frame.
> The first patch makes this change, while the second patch optimized the
> read of second part. Because it is not required to read the second part
> of the timestmap for each received frame but it is OK to read the second
> part twice per second and then cache it.
>
> v1->v2:
> - create a patch series instead of single patch
> - add optimization for reading the second part of the received timestamp,
> read the second twice per second instead of for each frame
>
> Horatiu Vultur (2):
> net: micrel: Change to receive timestamp in the frame for lan8841
> net: micrel: Schedule work to read seconds for lan8841
>
> drivers/net/phy/micrel.c | 272 ++++++++++++++++++++++++++-------------
> 1 file changed, 180 insertions(+), 92 deletions(-)
>
> --
> 2.38.0
>
--
/Horatiu
Powered by blists - more mailing lists