linux-kernel - Re: [PATCH] drm/msm/dsi: Enable BURST_MODE for command mode for DSI 6G v1.3+

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 15 Jun 2023 01:45:01 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Jessica Zhang <quic_jesszhan@...cinc.com>,
        Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>
Cc:     quic_abhinavk@...cinc.com, linux-arm-msm@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] drm/msm/dsi: Enable BURST_MODE for command mode for DSI
 6G v1.3+

On 13/06/2023 02:37, Jessica Zhang wrote:
> During a frame transfer in command mode, there could be frequent
> LP11 <-> HS transitions when multiple DCS commands are sent mid-frame or
> if the DSI controller is running on slow clock and is throttled. To
> minimize frame latency due to these transitions, it is recommended to
> send the frame in a single burst.
> 
> This feature is supported for DSI 6G 1.3 and above, thus enable burst
> mode if supported.
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@...cinc.com>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 744f2398a6d6..8254b06dca85 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -994,6 +994,11 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL,
>   			DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
>   			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay));
> +
> +		if (msm_host->cfg_hnd->major == MSM_DSI_VER_MAJOR_6G &&
> +				msm_host->cfg_hnd->minor >= MSM_DSI_6G_VER_MINOR_V1_3)
> +			dsi_write(msm_host, REG_DSI_CMD_MODE_MDP_CTRL2,
> +					DSI_CMD_MODE_MDP_CTRL2_BURST_MODE);

Please move this to dsi_ctrl_config(), the place where we set all the 
configs. Also please change this to RMW cycle.

>   	}
>   }
>   
> 
> ---
> base-commit: dd969f852ba4c66938c71889e826aa8e5300d2f2
> change-id: 20230608-b4-add-burst-mode-a5bb144069fa
> 
> Best regards,

-- 
With best wishes
Dmitry