linux-kernel - [PATCH v3 05/13] dt-bindings: remoteproc: glink-rpm-edge: Use "glink-edge" as node name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net>
Date:   Thu, 15 Jun 2023 18:50:38 +0200
From:   Stephan Gerhold <stephan@...hold.net>
To:     Bjorn Andersson <andersson@...nel.org>
Cc:     Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Mathieu Poirier <mathieu.poirier@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-remoteproc@...r.kernel.org,
        Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH v3 05/13] dt-bindings: remoteproc: glink-rpm-edge: Use
 "glink-edge" as node name

Semantically glink-edge and glink-rpm-edge are similar: Both describe
the communication channels to a remote processor. The RPM glink-edge is
a special case that needs slightly different properties but otherwise
it is used exactly the same.

To improve consistency use the same "glink-edge" node name also for
glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid
matching the wrong schema. qcom,glink-edge.yaml is always referenced
explicitly from other schemas. This will already ensure that the nodes
are being checked, so it's not necessary to bind to all nodes named
"glink-edge".

Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml     | 3 ---
 Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
index 7b43ad3daa56..e78a89c9ec41 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -14,9 +14,6 @@ description:
   related to the remote processor.
 
 properties:
-  $nodename:
-    const: glink-edge
-
   apr:
     $ref: /schemas/soc/qcom/qcom,apr.yaml#
     required:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
index f5a044e20c4e..884158bccd50 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -84,7 +84,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    rpm-glink {
+    glink-edge {
         compatible = "qcom,glink-rpm";
         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
         mboxes = <&apcs_glb 0>;

-- 
2.40.1