| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net>
Date: Thu, 15 Jun 2023 18:50:44 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-remoteproc@...r.kernel.org,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH v3 11/13] arm64: dts: qcom: Add rpm-proc node for GLINK
gplatforms
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Tested-by: Konrad Dybcio <konrad.dybcio@...aro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++++-----
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 28 ++++---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 113 ++++++++++++-------------
arch/arm64/boot/dts/qcom/msm8998.dtsi | 98 +++++++++++-----------
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 126 ++++++++++++++--------------
arch/arm64/boot/dts/qcom/qcs404.dtsi | 152 +++++++++++++++++-----------------
arch/arm64/boot/dts/qcom/sdm630.dtsi | 132 +++++++++++++++--------------
arch/arm64/boot/dts/qcom/sm6115.dtsi | 128 ++++++++++++++--------------
arch/arm64/boot/dts/qcom/sm6125.dtsi | 140 ++++++++++++++++---------------
arch/arm64/boot/dts/qcom/sm6375.dtsi | 126 ++++++++++++++--------------
10 files changed, 564 insertions(+), 527 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 7355f266742a..47b8b1d6730a 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -146,6 +146,32 @@ psci: psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -182,28 +208,6 @@ q6_region: memory@...00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq6018";
- qcom,glink-channels = "rpm_requests";
-
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq6018_s2: s2 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index f120c7c52351..36fb67f0eb9f 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -151,6 +151,22 @@ psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq9574";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -179,18 +195,6 @@ smem@...00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq9574";
- qcom,glink-channels = "rpm_requests";
- };
- };
-
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0cb2d4f08c3a..3347db57594d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -398,6 +398,63 @@ psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8996";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp1: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp2: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp3: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp4: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp5: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp6: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -472,62 +529,6 @@ mdata_mem: mpss-metadata {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8996-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp1: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp2: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp3: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp4: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp5: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp6: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f0e943ff0046..f0098db1da5f 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -321,68 +321,72 @@ psci {
method = "smc";
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
+ rpm: remoteproc {
+ compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
+ glink-edge {
+ compatible = "qcom,glink-rpm";
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8998";
- qcom,glink-channels = "rpm_requests";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
- #clock-cells = <1>;
- };
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
- rpmpd: power-controller {
- compatible = "qcom,msm8998-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
+ rpmpd: power-controller {
+ compatible = "qcom,msm8998-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
- rpmpd_opp_turbo_plus: opp10 {
- opp-level = <RPM_SMD_LEVEL_BINNING>;
+ rpmpd_opp_turbo_plus: opp10 {
+ opp-level = <RPM_SMD_LEVEL_BINNING>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 0ed11e80e5e2..ccb13ec10b4d 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -198,6 +198,71 @@ CLUSTER_PD: power-domain-cpu-cluster {
};
};
+ rpm: remoteproc {
+ compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-qcm2290";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,qcm2290-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_min_svs: opp1 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp5 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp7 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -288,67 +353,6 @@ rmtfs_mem: memory@...01000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcm2290";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,qcm2290-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_min_svs: opp1 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp5 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp7 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 972f753847e1..2153704ee63a 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -166,6 +166,84 @@ psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-qcs404";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,qcs404-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <16>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <32>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <48>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <64>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <128>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <192>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <256>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <320>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <384>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <416>;
+ };
+
+ rpmpd_opp_turbo_plus: opp11 {
+ opp-level = <512>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -217,80 +295,6 @@ uefi_mem: memory@...00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcs404";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,qcs404-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <16>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <32>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <48>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <64>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <128>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <192>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <256>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <320>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <384>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <416>;
- };
-
- rpmpd_opp_turbo_plus: opp11 {
- opp-level = <512>;
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index bba0f366ef03..600646a4e49d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -359,6 +359,74 @@ psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sdm660";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sdm660-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -440,70 +508,6 @@ zap_shader_region: gpu@...00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sdm660";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sdm660-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
- };
- };
- };
- };
-
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 55118577bf92..f8936192a791 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -341,6 +341,72 @@ CLUSTER_1_PD: power-domain-cpu-cluster1 {
};
};
+ rpm: remoteproc {
+ compatible = "qcom,sm6115-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6115";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6115-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_min_svs: opp1 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp5 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp7 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -440,68 +506,6 @@ rmtfs_mem: memory@...01000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6115";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6115-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_min_svs: opp1 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp5 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp7 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index a596baa6ce3e..d7c1a40617c6 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -181,6 +181,78 @@ psci {
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6125";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6125-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -292,74 +364,6 @@ qseecom_ta_mem: memory@...c00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6125";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6125-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 3dba34210a6d..5ed2184485fa 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -494,67 +494,71 @@ cmdline_region: cmdline@...00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6375";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
- clocks = <&xo_board_clk>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6375-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_min_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ rpm: remoteproc {
+ compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6375";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+ clocks = <&xo_board_clk>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6375-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_min_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
};
};
};
--
2.40.1
Powered by blists - more mailing lists