[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230615092753.323844-7-valentin.caron@foss.st.com>
Date: Thu, 15 Jun 2023 11:27:52 +0200
From: Valentin Caron <valentin.caron@...s.st.com>
To: Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>
CC: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Antonio Borneo <antonio.borneo@...s.st.com>,
Christophe Guibout <christophe.guibout@...s.st.com>,
Gabriel Fernandez <gabriel.fernandez@...s.st.com>,
<linux-rtc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Valentin Caron <valentin.caron@...s.st.com>
Subject: [PATCH 6/7] rtc: stm32: fix unnecessary parentheses
Fix a few style issues reported by checkpatch.pl:
- Unnecessary parentheses
- Lines should not end with a '('
Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
drivers/rtc/rtc-stm32.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index 17e549806784..30c5004d6902 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -160,10 +160,9 @@ static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
* slowest rtc_ck frequency may be 32kHz and highest should be
* 1MHz, we poll every 10 us with a timeout of 100ms.
*/
- return readl_relaxed_poll_timeout_atomic(
- rtc->base + regs->isr,
- isr, (isr & STM32_RTC_ISR_INITF),
- 10, 100000);
+ return readl_relaxed_poll_timeout_atomic(rtc->base + regs->isr, isr,
+ (isr & STM32_RTC_ISR_INITF),
+ 10, 100000);
}
return 0;
@@ -448,16 +447,16 @@ static int stm32_rtc_valid_alrm(struct stm32_rtc *rtc, struct rtc_time *tm)
* M-D-Y H:M:S < alarm <= (M+1)-D-Y H:M:S
* with a specific case for December...
*/
- if ((((tm->tm_year > cur_year) &&
- (tm->tm_mon == 0x1) && (cur_mon == 0x12)) ||
- ((tm->tm_year == cur_year) &&
- (tm->tm_mon <= cur_mon + 1))) &&
- ((tm->tm_mday > cur_day) ||
- ((tm->tm_mday == cur_day) &&
- ((tm->tm_hour > cur_hour) ||
- ((tm->tm_hour == cur_hour) && (tm->tm_min > cur_min)) ||
- ((tm->tm_hour == cur_hour) && (tm->tm_min == cur_min) &&
- (tm->tm_sec >= cur_sec))))))
+ if (((tm->tm_year > cur_year &&
+ tm->tm_mon == 0x1 && cur_mon == 0x12) ||
+ (tm->tm_year == cur_year &&
+ tm->tm_mon <= cur_mon + 1)) &&
+ (tm->tm_mday > cur_day ||
+ (tm->tm_mday == cur_day &&
+ (tm->tm_hour > cur_hour ||
+ (tm->tm_hour == cur_hour && tm->tm_min > cur_min) ||
+ (tm->tm_hour == cur_hour && tm->tm_min == cur_min &&
+ tm->tm_sec >= cur_sec)))))
return 0;
return -EINVAL;
@@ -666,7 +665,7 @@ static int stm32_rtc_init(struct platform_device *pdev,
* Can't find a 1Hz, so give priority to RTC power consumption
* by choosing the higher possible value for prediv_a
*/
- if ((pred_s > pred_s_max) || (pred_a > pred_a_max)) {
+ if (pred_s > pred_s_max || pred_a > pred_a_max) {
pred_a = pred_a_max;
pred_s = (rate / (pred_a + 1)) - 1;
--
2.25.1
Powered by blists - more mailing lists