[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616135922.442979-19-tomi.valkeinen@ideasonboard.com>
Date: Fri, 16 Jun 2023 16:59:22 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Michael Tretter <m.tretter@...gutronix.de>,
Hans Verkuil <hverkuil@...all.nl>,
Mike Pagano <mpagano@...too.org>,
Krzysztof HaĆasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>,
Satish Nagireddy <satish.nagireddy@...cruise.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
Add support for FPD-Link non-sync mode with external clock. The only
thing that needs to be added is the calculation for the clkout.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
drivers/media/i2c/ds90ub953.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index ff55740965eb..ae90a647489a 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -143,6 +143,7 @@ struct ub953_data {
struct i2c_client *client;
struct regmap *regmap;
+ struct clk *clkin;
u32 num_data_lanes;
bool non_cont_clk;
@@ -842,15 +843,21 @@ static int ub953_i2c_master_init(struct ub953_data *priv)
static u64 ub953_get_fc_rate(struct ub953_data *priv)
{
- if (priv->mode != UB953_MODE_SYNC) {
+ switch (priv->mode) {
+ case UB953_MODE_SYNC:
+ if (priv->hw_data->is_ub971)
+ return priv->plat_data->bc_rate * 160ull;
+ else
+ return priv->plat_data->bc_rate / 2 * 160ull;
+
+ case UB953_MODE_NONSYNC_EXT:
+ /* CLKIN_DIV = 1 always */
+ return clk_get_rate(priv->clkin) * 80ull;
+
+ default:
/* Not supported */
return 0;
}
-
- if (priv->hw_data->is_ub971)
- return priv->plat_data->bc_rate * 160ull;
- else
- return priv->plat_data->bc_rate / 2 * 160ull;
}
static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv,
@@ -1189,9 +1196,15 @@ static int ub953_hw_init(struct ub953_data *priv)
dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap",
priv->mode);
- if (priv->mode != UB953_MODE_SYNC)
+ if (priv->mode != UB953_MODE_SYNC &&
+ priv->mode != UB953_MODE_NONSYNC_EXT)
return dev_err_probe(dev, -ENODEV,
- "Only synchronous mode supported\n");
+ "Unsupported mode selected: %d\n",
+ priv->mode);
+
+ if (priv->mode == UB953_MODE_NONSYNC_EXT && !priv->clkin)
+ return dev_err_probe(dev, -EINVAL,
+ "clkin required for non-sync ext mode\n");
ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v);
if (ret)
@@ -1319,6 +1332,11 @@ static int ub953_probe(struct i2c_client *client)
goto err_mutex_destroy;
}
+ priv->clkin = devm_clk_get_optional(dev, "clkin");
+ if (IS_ERR(priv->clkin))
+ return dev_err_probe(dev, PTR_ERR(priv->clkin),
+ "failed to parse 'clkin'\n");
+
ret = ub953_parse_dt(priv);
if (ret)
goto err_mutex_destroy;
--
2.34.1
Powered by blists - more mailing lists