[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616135922.442979-14-tomi.valkeinen@ideasonboard.com>
Date: Fri, 16 Jun 2023 16:59:17 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Michael Tretter <m.tretter@...gutronix.de>,
Hans Verkuil <hverkuil@...all.nl>,
Mike Pagano <mpagano@...too.org>,
Krzysztof HaĆasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>,
Satish Nagireddy <satish.nagireddy@...cruise.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v14 13/18] media: i2c: ds90ub953: Use v4l2_fwnode_endpoint_parse()
Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
drivers/media/i2c/ds90ub953.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index 1e3827a60029..5b586855c77b 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -25,6 +25,8 @@
#include <media/i2c/ds90ub9xx.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mediabus.h>
#include <media/v4l2-subdev.h>
#define UB953_PAD_SINK 0
@@ -1111,7 +1113,9 @@ static const struct regmap_config ub953_regmap_config = {
static int ub953_parse_dt(struct ub953_data *priv)
{
struct device *dev = &priv->client->dev;
+ struct v4l2_fwnode_endpoint vep = {};
struct fwnode_handle *ep_fwnode;
+ unsigned char nlanes;
int ret;
ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
@@ -1119,19 +1123,22 @@ static int ub953_parse_dt(struct ub953_data *priv)
if (!ep_fwnode)
return dev_err_probe(dev, -ENOENT, "no endpoint found\n");
- ret = fwnode_property_count_u32(ep_fwnode, "data-lanes");
+ vep.bus_type = V4L2_MBUS_CSI2_DPHY;
+ ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep);
fwnode_handle_put(ep_fwnode);
- if (ret < 0)
+ if (ret)
return dev_err_probe(dev, ret,
- "failed to parse property 'data-lanes'\n");
+ "failed to parse sink endpoint data\n");
+
+ nlanes = vep.bus.mipi_csi2.num_data_lanes;
- if (ret != 1 && ret != 2 && ret != 4)
+ if (nlanes != 1 && nlanes != 2 && nlanes != 4)
return dev_err_probe(dev, -EINVAL,
- "bad number of data-lanes: %d\n", ret);
+ "bad number of data-lanes: %d\n", nlanes);
- priv->num_data_lanes = ret;
+ priv->num_data_lanes = nlanes;
return 0;
}
--
2.34.1
Powered by blists - more mailing lists