[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230616-feature-maxlinear-dt-better-irq-desc-v1-1-57a8936543bf@kernel.org>
Date: Fri, 16 Jun 2023 12:45:57 +0200
From: Michael Walle <mwalle@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Andrew Lunn <andrew@...n.ch>, Michael Walle <michael@...le.cc>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Rob Herring <robh@...nel.org>,
Michael Walle <mwalle@...nel.org>
Subject: [PATCH net-next] dt-bindings: net: phy: gpy2xx: more precise
description
Mention that the interrupt line is just asserted for a random period of
time, not the entire time.
Suggested-by: Rob Herring <robh@...nel.org>
Signed-off-by: Michael Walle <mwalle@...nel.org>
---
Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index d71fa9de2b64..8a3713abd1ca 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -17,11 +17,12 @@ properties:
maxlinear,use-broken-interrupts:
description: |
Interrupts are broken on some GPY2xx PHYs in that they keep the
- interrupt line asserted even after the interrupt status register is
- cleared. Thus it is blocking the interrupt line which is usually bad
- for shared lines. By default interrupts are disabled for this PHY and
- polling mode is used. If one can live with the consequences, this
- property can be used to enable interrupt handling.
+ interrupt line asserted for a random amount of time even after the
+ interrupt status register is cleared. Thus it is blocking the
+ interrupt line which is usually bad for shared lines. By default,
+ interrupts are disabled for this PHY and polling mode is used. If one
+ can live with the consequences, this property can be used to enable
+ interrupt handling.
Affected PHYs (as far as known) are GPY215B and GPY215C.
type: boolean
---
base-commit: f7efed9f38f886edb450041b82a6f15d663c98f8
change-id: 20230616-feature-maxlinear-dt-better-irq-desc-fd31aee6641c
Powered by blists - more mailing lists