| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53324e25-c71f-b485-505b-fff3213fc599@roeck-us.net>
Date: Sat, 24 Jun 2023 09:50:25 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: JuenKit_Yip@...mail.com, jdelvare@...e.com,
krzysztof.kozlowki+dt@...aro.org, conor+dt@...nel.org,
broonie@...nel.org, vincent@...emblay.dev, michal.simek@....com,
geert+renesas@...der.be
Cc: linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] hwmon: (sht3x) convert some of sysfs interface to
hwmon
On 6/24/23 09:01, JuenKit_Yip@...mail.com wrote:
> From: JuenKit Yip <JuenKit_Yip@...mail.com>
>
> update_interval, temperature/humidity max/min and hyst
> were moved to new hwmon interface, and only heater and
> repeatability were reserved as non-stardard sysfs interface.
>
> Signed-off-by: JuenKit Yip <JuenKit_Yip@...mail.com>
Please version your patches and provide change logs.
> ---
> drivers/hwmon/sht3x.c | 359 ++++++++++++++++++++++++++++--------------
> 1 file changed, 244 insertions(+), 115 deletions(-)
>
> diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
> index bf18630619e0..9b2dadd11eeb 100644
> --- a/drivers/hwmon/sht3x.c
> +++ b/drivers/hwmon/sht3x.c
> @@ -147,6 +147,19 @@ static const u16 mode_to_update_interval[] = {
> 100,
> };
>
> +static const struct hwmon_channel_info * const sht3x_channel_info[] = {
> + HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MIN |
> + HWMON_T_MIN_HYST | HWMON_T_MAX |
> + HWMON_T_MAX_HYST | HWMON_T_ALARM),
> + HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT | HWMON_H_MIN |
> + HWMON_H_MIN_HYST | HWMON_H_MAX |
> + HWMON_H_MAX_HYST | HWMON_H_ALARM),
> + NULL,
> +};
> +
> +static const struct i2c_device_id sht3x_ids[];
> +
Again, please avoid forward declarations. More on that below.
> struct sht3x_data {
> struct i2c_client *client;
> struct mutex i2c_lock; /* lock for sending i2c commands */
> @@ -276,27 +289,24 @@ static struct sht3x_data *sht3x_update_client(struct device *dev)
> return data;
> }
>
> -/* sysfs attributes */
> -static ssize_t temp1_input_show(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static int temp1_input_read(struct device *dev)
> {
> struct sht3x_data *data = sht3x_update_client(dev);
>
> if (IS_ERR(data))
> return PTR_ERR(data);
>
> - return sprintf(buf, "%d\n", data->temperature);
> + return data->temperature;
> }
>
> -static ssize_t humidity1_input_show(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static int humidity1_input_read(struct device *dev)
> {
> struct sht3x_data *data = sht3x_update_client(dev);
>
> if (IS_ERR(data))
> return PTR_ERR(data);
>
> - return sprintf(buf, "%u\n", data->humidity);
> + return data->humidity;
> }
>
> /*
> @@ -332,33 +342,24 @@ static int limits_update(struct sht3x_data *data)
> return ret;
> }
>
> -static ssize_t temp1_limit_show(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static int temp1_limit_read(struct device *dev, int index)
> {
> struct sht3x_data *data = dev_get_drvdata(dev);
> - u8 index = to_sensor_dev_attr(attr)->index;
> - int temperature_limit = data->temperature_limits[index];
>
> - return sysfs_emit(buf, "%d\n", temperature_limit);
> + return data->temperature_limits[index];
> }
>
> -static ssize_t humidity1_limit_show(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static int humidity1_limit_read(struct device *dev, int index)
> {
> struct sht3x_data *data = dev_get_drvdata(dev);
> - u8 index = to_sensor_dev_attr(attr)->index;
> - u32 humidity_limit = data->humidity_limits[index];
>
> - return sysfs_emit(buf, "%u\n", humidity_limit);
> + return data->humidity_limits[index];
> }
>
> /*
> - * limit_store must only be called with data_lock held
> + * limit_write must only be called with data_lock held
> */
> -static size_t limit_store(struct device *dev,
> - size_t count,
> +static size_t limit_write(struct device *dev,
> u8 index,
> int temperature,
> u32 humidity)
> @@ -379,7 +380,7 @@ static size_t limit_store(struct device *dev,
> * ST = (T + 45) / 175 * 2^16
> * SRH = RH / 100 * 2^16
> * adapted for fixed point arithmetic and packed the same as
> - * in limit_show()
> + * in limit_read()
> */
> raw = ((u32)(temperature + 45000) * 24543) >> (16 + 7);
> raw |= ((humidity * 42950) >> 16) & 0xfe00;
> @@ -400,50 +401,43 @@ static size_t limit_store(struct device *dev,
>
> data->temperature_limits[index] = temperature;
> data->humidity_limits[index] = humidity;
> - return count;
> +
> + return 0;
> }
>
> -static ssize_t temp1_limit_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t count)
> +static int temp1_limit_write(struct device *dev, int index, const char *val)
> {
> int temperature;
> int ret;
> struct sht3x_data *data = dev_get_drvdata(dev);
> - u8 index = to_sensor_dev_attr(attr)->index;
>
> - ret = kstrtoint(buf, 0, &temperature);
> + ret = kstrtoint(val, 0, &temperature);
> if (ret)
> return ret;
>
> temperature = clamp_val(temperature, SHT3X_MIN_TEMPERATURE,
> SHT3X_MAX_TEMPERATURE);
> mutex_lock(&data->data_lock);
> - ret = limit_store(dev, count, index, temperature,
> + ret = limit_write(dev, index, temperature,
> data->humidity_limits[index]);
> mutex_unlock(&data->data_lock);
>
> return ret;
> }
>
> -static ssize_t humidity1_limit_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t count)
> +static int humidity1_limit_write(struct device *dev, int index, const char *val)
> {
> u32 humidity;
> int ret;
> struct sht3x_data *data = dev_get_drvdata(dev);
> - u8 index = to_sensor_dev_attr(attr)->index;
>
> - ret = kstrtou32(buf, 0, &humidity);
> + ret = kstrtou32(val, 0, &humidity);
> if (ret)
> return ret;
>
> humidity = clamp_val(humidity, SHT3X_MIN_HUMIDITY, SHT3X_MAX_HUMIDITY);
> mutex_lock(&data->data_lock);
> - ret = limit_store(dev, count, index, data->temperature_limits[index],
> + ret = limit_write(dev, index, data->temperature_limits[index],
> humidity);
> mutex_unlock(&data->data_lock);
>
> @@ -474,7 +468,6 @@ static void sht3x_select_command(struct sht3x_data *data)
> }
>
> static int status_register_read(struct device *dev,
> - struct device_attribute *attr,
> char *buffer, int length)
> {
> int ret;
> @@ -487,34 +480,30 @@ static int status_register_read(struct device *dev,
> return ret;
> }
>
> -static ssize_t temp1_alarm_show(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static int temp1_alarm_read(struct device *dev)
> {
> char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
> int ret;
>
> - ret = status_register_read(dev, attr, buffer,
> + ret = status_register_read(dev, buffer,
> SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
> if (ret)
> return ret;
>
> - return sysfs_emit(buf, "%d\n", !!(buffer[0] & 0x04));
> + return !!(buffer[0] & 0x04);
> }
>
> -static ssize_t humidity1_alarm_show(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static int humidity1_alarm_read(struct device *dev)
> {
> char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
> int ret;
>
> - ret = status_register_read(dev, attr, buffer,
> + ret = status_register_read(dev, buffer,
> SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
> if (ret)
> return ret;
>
> - return sysfs_emit(buf, "%d\n", !!(buffer[0] & 0x08));
> + return !!(buffer[0] & 0x08);
> }
>
> static ssize_t heater_enable_show(struct device *dev,
> @@ -524,7 +513,7 @@ static ssize_t heater_enable_show(struct device *dev,
> char buffer[SHT3X_WORD_LEN + SHT3X_CRC8_LEN];
> int ret;
>
> - ret = status_register_read(dev, attr, buffer,
> + ret = status_register_read(dev, buffer,
> SHT3X_WORD_LEN + SHT3X_CRC8_LEN);
> if (ret)
> return ret;
> @@ -560,20 +549,14 @@ static ssize_t heater_enable_store(struct device *dev,
> return ret;
> }
>
> -static ssize_t update_interval_show(struct device *dev,
> - struct device_attribute *attr,
> - char *buf)
> +static int update_interval_read(struct device *dev)
> {
> struct sht3x_data *data = dev_get_drvdata(dev);
>
> - return sysfs_emit(buf, "%u\n",
> - mode_to_update_interval[data->mode]);
> + return mode_to_update_interval[data->mode];
> }
>
> -static ssize_t update_interval_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t count)
> +static int update_interval_write(struct device *dev, const char *val)
> {
> u16 update_interval;
> u8 mode;
> @@ -582,7 +565,7 @@ static ssize_t update_interval_store(struct device *dev,
> struct sht3x_data *data = dev_get_drvdata(dev);
> struct i2c_client *client = data->client;
>
> - ret = kstrtou16(buf, 0, &update_interval);
> + ret = kstrtou16(val, 0, &update_interval);
> if (ret)
> return ret;
>
> @@ -592,7 +575,7 @@ static ssize_t update_interval_store(struct device *dev,
> /* mode did not change */
> if (mode == data->mode) {
> mutex_unlock(&data->data_lock);
> - return count;
> + return 0;
> }
>
> mutex_lock(&data->i2c_lock);
> @@ -634,7 +617,7 @@ static ssize_t update_interval_store(struct device *dev,
> if (ret != SHT3X_CMD_LENGTH)
> return ret < 0 ? ret : -EIO;
>
> - return count;
> + return 0;
> }
>
> static ssize_t repeatability_show(struct device *dev,
> @@ -668,60 +651,211 @@ static ssize_t repeatability_store(struct device *dev,
> return count;
> }
>
> -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp1_input, 0);
> -static SENSOR_DEVICE_ATTR_RO(humidity1_input, humidity1_input, 0);
> -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp1_limit, limit_max);
> -static SENSOR_DEVICE_ATTR_RW(humidity1_max, humidity1_limit, limit_max);
> -static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp1_limit, limit_max_hyst);
> -static SENSOR_DEVICE_ATTR_RW(humidity1_max_hyst, humidity1_limit,
> - limit_max_hyst);
> -static SENSOR_DEVICE_ATTR_RW(temp1_min, temp1_limit, limit_min);
> -static SENSOR_DEVICE_ATTR_RW(humidity1_min, humidity1_limit, limit_min);
> -static SENSOR_DEVICE_ATTR_RW(temp1_min_hyst, temp1_limit, limit_min_hyst);
> -static SENSOR_DEVICE_ATTR_RW(humidity1_min_hyst, humidity1_limit,
> - limit_min_hyst);
> -static SENSOR_DEVICE_ATTR_RO(temp1_alarm, temp1_alarm, 0);
> -static SENSOR_DEVICE_ATTR_RO(humidity1_alarm, humidity1_alarm, 0);
> static SENSOR_DEVICE_ATTR_RW(heater_enable, heater_enable, 0);
> -static SENSOR_DEVICE_ATTR_RW(update_interval, update_interval, 0);
> static SENSOR_DEVICE_ATTR_RW(repeatability, repeatability, 0);
>
> static struct attribute *sht3x_attrs[] = {
> - &sensor_dev_attr_temp1_input.dev_attr.attr,
> - &sensor_dev_attr_humidity1_input.dev_attr.attr,
> - &sensor_dev_attr_temp1_max.dev_attr.attr,
> - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
> - &sensor_dev_attr_humidity1_max.dev_attr.attr,
> - &sensor_dev_attr_humidity1_max_hyst.dev_attr.attr,
> - &sensor_dev_attr_temp1_min.dev_attr.attr,
> - &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
> - &sensor_dev_attr_humidity1_min.dev_attr.attr,
> - &sensor_dev_attr_humidity1_min_hyst.dev_attr.attr,
> - &sensor_dev_attr_temp1_alarm.dev_attr.attr,
> - &sensor_dev_attr_humidity1_alarm.dev_attr.attr,
> &sensor_dev_attr_heater_enable.dev_attr.attr,
> - &sensor_dev_attr_update_interval.dev_attr.attr,
> - &sensor_dev_attr_repeatability.dev_attr.attr,
> - NULL
> -};
> -
> -static struct attribute *sts3x_attrs[] = {
> - &sensor_dev_attr_temp1_input.dev_attr.attr,
> - &sensor_dev_attr_temp1_max.dev_attr.attr,
> - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
> - &sensor_dev_attr_temp1_min.dev_attr.attr,
> - &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
> - &sensor_dev_attr_temp1_alarm.dev_attr.attr,
> - &sensor_dev_attr_heater_enable.dev_attr.attr,
> - &sensor_dev_attr_update_interval.dev_attr.attr,
> &sensor_dev_attr_repeatability.dev_attr.attr,
> NULL
> };
>
> ATTRIBUTE_GROUPS(sht3x);
> -ATTRIBUTE_GROUPS(sts3x);
>
> -static const struct i2c_device_id sht3x_ids[];
> +static umode_t sht3x_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct sht3x_data *chip_data = data;
> + struct i2c_client *client = chip_data->client;
> +
> + switch (type) {
> + case hwmon_chip:
> + switch (attr) {
> + case hwmon_chip_update_interval:
> + return 0644;
> + default:
> + break;
> + }
> + break;
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_alarm:
> + return 0444;
> + case hwmon_temp_max:
> + case hwmon_temp_max_hyst:
> + case hwmon_temp_min:
> + case hwmon_temp_min_hyst:
> + return 0644;
> + default:
> + break;
> + }
> + break;
> + case hwmon_humidity:
> + if (i2c_match_id(sht3x_ids, client)->driver_data == sts3x)
It would be better to save the chip id in struct sht3x_data to avoid
having to dereference driver_data here, and to avoid needing a pointer
to struct i2c_client.
> + return 0;
Maybe break; for consistency.
> + switch (attr) {
> + case hwmon_humidity_input:
> + case hwmon_humidity_alarm:
> + return 0444;
> + case hwmon_humidity_max:
> + case hwmon_humidity_max_hyst:
> + case hwmon_humidity_min:
> + case hwmon_humidity_min_hyst:
> + return 0644;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int sht3x_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + enum sht3x_limits index;
> +
> + switch (type) {
> + case hwmon_chip:
> + switch (attr) {
> + case hwmon_chip_update_interval:
> + *val = update_interval_read(dev);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_input:
> + *val = temp1_input_read(dev);
> + break;
> + case hwmon_temp_alarm:
> + *val = temp1_alarm_read(dev);
> + break;
> + case hwmon_temp_max:
> + index = limit_max;
> + *val = temp1_limit_read(dev, index);
> + break;
> + case hwmon_temp_max_hyst:
> + index = limit_max_hyst;
> + *val = temp1_limit_read(dev, index);
> + break;
> + case hwmon_temp_min:
> + index = limit_min;
> + *val = temp1_limit_read(dev, index);
> + break;
> + case hwmon_temp_min_hyst:
> + index = limit_min_hyst;
> + *val = temp1_limit_read(dev, index);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case hwmon_humidity:
> + switch (attr) {
> + case hwmon_humidity_input:
> + *val = humidity1_input_read(dev);
> + break;
> + case hwmon_humidity_alarm:
> + *val = humidity1_alarm_read(dev);
> + break;
> + case hwmon_humidity_max:
> + index = limit_max;
> + *val = humidity1_limit_read(dev, index);
> + break;
> + case hwmon_humidity_max_hyst:
> + index = limit_max_hyst;
> + *val = humidity1_limit_read(dev, index);
> + break;
> + case hwmon_humidity_min:
> + index = limit_min;
> + *val = humidity1_limit_read(dev, index);
> + break;
> + case hwmon_humidity_min_hyst:
> + index = limit_min_hyst;
> + *val = humidity1_limit_read(dev, index);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int sht3x_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + enum sht3x_limits index;
> +
> + switch (type) {
> + case hwmon_chip:
> + switch (attr) {
> + case hwmon_chip_update_interval:
> + return update_interval_write(dev, (const char *)&val);
> + default:
> + return -EOPNOTSUPP;
> + }
> + case hwmon_temp:
> + switch (attr) {
> + case hwmon_temp_max:
> + index = limit_max;
> + break;
> + case hwmon_temp_max_hyst:
> + index = limit_max_hyst;
> + break;
> + case hwmon_temp_min:
> + index = limit_min;
> + break;
> + case hwmon_temp_min_hyst:
> + index = limit_min_hyst;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + return temp1_limit_write(dev, index, (const char *)&val);
This does not work. The val parameter passed to the write function
is already the value, not a pointer to a string. There is no need
to parse it again, and trying to do so will fail (or, with bad luck,
crash).
Guenter
> + case hwmon_humidity:
> + switch (attr) {
> + case hwmon_humidity_max:
> + index = limit_max;
> + break;
> + case hwmon_humidity_max_hyst:
> + index = limit_max_hyst;
> + break;
> + case hwmon_humidity_min:
> + index = limit_min;
> + break;
> + case hwmon_humidity_min_hyst:
> + index = limit_min_hyst;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + return humidity1_limit_write(dev, index, (const char *)val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static const struct hwmon_ops sht3x_ops = {
> + .is_visible = sht3x_is_visible,
> + .read = sht3x_read,
> + .write = sht3x_write,
> +};
> +
> +static const struct hwmon_chip_info sht3x_chip_info = {
> + .ops = &sht3x_ops,
> + .info = sht3x_channel_info,
> +};
>
> static int sht3x_probe(struct i2c_client *client)
> {
> @@ -730,7 +864,6 @@ static int sht3x_probe(struct i2c_client *client)
> struct device *hwmon_dev;
> struct i2c_adapter *adap = client->adapter;
> struct device *dev = &client->dev;
> - const struct attribute_group **attribute_groups;
>
> /*
> * we require full i2c support since the sht3x uses multi-byte read and
> @@ -771,15 +904,11 @@ static int sht3x_probe(struct i2c_client *client)
> if (ret)
> return ret;
>
> - if (i2c_match_id(sht3x_ids, client)->driver_data == sts3x)
> - attribute_groups = sts3x_groups;
> - else
> - attribute_groups = sht3x_groups;
> -
> - hwmon_dev = devm_hwmon_device_register_with_groups(dev,
> - client->name,
> - data,
> - attribute_groups);
> + hwmon_dev = devm_hwmon_device_register_with_info(dev,
> + client->name,
> + data,
> + &sht3x_chip_info,
> + sht3x_groups);
>
> if (IS_ERR(hwmon_dev))
> dev_dbg(dev, "unable to register hwmon device\n");
Powered by blists - more mailing lists