[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <709fbed2-a7cf-d2fa-da4e-5d417b7130d4@linaro.org>
Date: Tue, 27 Jun 2023 09:43:50 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Xianwei Zhao <xianwei.zhao@...ogic.com>,
Conor Dooley <conor.dooley@...rochip.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Lucas Tanure <tanure@...ux.com>
Subject: Re: [PATCH 0/2] Baisc devicetree support for Amlogic T7
On 27/06/2023 08:13, Xianwei Zhao wrote:
> Hi Conor,
> Thanks for you reply.
> On 2023/6/26 18:02, Conor Dooley wrote:
>
>
> > [ EXTERNAL EMAIL ]
> >
> > Hey,
> >
> > On Mon, Jun 26, 2023 at 05:52:21PM +0800, Xianwei Zhao wrote:
> >> T7 is an advanced application processor designed for smart display.
> >>
> >> Add the new T7 SoC/board device tree bindings.
> >>
> >> Add basic support for the T7 based Amlogic AN400 board, which describes
> >> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
> >> booting up into the serial console.
> >
> > Lucas has already sent patches for the T7 SoC & is at v5:
> > https://lore.kernel.org/linux-devicetree/20230623081242.109131-1-tanure@linux.com/
> >
> > There's been a bit of discussion there, and there serial stuff in
> > particular is different in his series (it doesn't use always-on for
> > examples).
> > Could you please go and take a look at his series?
> >
> > Cheers,
> > Conor.
> >
> AN400 is the reference board designed by Amlogic, which is different from Khadas VIM4.
Please coordinate with Lucas so a single bindings & dtsi patches are submitted,
in any case only a single one will be reviewed and merged.
You can rebase your AN400 dts on top of his VIM4 initial patchset.
Thanks,
Neil
> And T7 serial is the same as S4, so I follow S4 serial.
>
> >>
> >> Xianwei Zhao (2):
> >> dt-bindings: arm: amlogic: add T7 based AN400 bindings
> >> arm64: dts: add support for T7 based Amlogic AN400
> >>
> >> .../devicetree/bindings/arm/amlogic.yaml | 6 +
> >> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> >> .../dts/amlogic/amlogic-t7-a311d2-an400.dts | 30 ++++
> >> arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 156 ++++++++++++++++++
> >> 4 files changed, 193 insertions(+)
> >> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
> >> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
> >>
> >>
> >> base-commit: 057889cb4244096ea5abcbe76ffd4d311c3078fe
> >> --
> >> 2.37.1
> >>
> >>
> >> _______________________________________________
> >> linux-amlogic mailing list
> >> linux-amlogic@...ts.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-amlogic
Powered by blists - more mailing lists