[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <afde2981-3801-a93e-3cf2-2ab5d24ee3e1@linaro.org>
Date: Wed, 28 Jun 2023 13:06:53 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Imran Shaik <quic_imrashai@...cinc.com>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Taniya Das <quic_tdas@...cinc.com>,
Melody Olvera <quic_molvera@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Jagadeesh Kona <quic_jkona@...cinc.com>,
Satya Priya Kakitapalli <quic_skakitap@...cinc.com>,
Ajit Pandey <quic_ajipan@...cinc.com>
Subject: Re: [PATCH V2 3/5] clk: qcom: gcc-qdu1000: Update GCC clocks as per
the latest hw version
On 28.06.2023 11:28, Imran Shaik wrote:
> Add support for gcc_ddrss_ecpri_gsi_clk and update the GCC clkref clocks
> as per the latest hardware version of QDU1000 and QRU100 SoCs.
>
> Co-developed-by: Taniya Das <quic_tdas@...cinc.com>
> Signed-off-by: Taniya Das <quic_tdas@...cinc.com>
> Signed-off-by: Imran Shaik <quic_imrashai@...cinc.com>
> ---
> Changes since v1:
> - Newly added
>
> drivers/clk/qcom/gcc-qdu1000.c | 32 ++++++++++++++++++++++++++------
> 1 file changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
> index c00d26a3e6df..991fb2bc97e9 100644
> --- a/drivers/clk/qcom/gcc-qdu1000.c
> +++ b/drivers/clk/qcom/gcc-qdu1000.c
> @@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
> },
> };
>
> +static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
> + .halt_reg = 0x54298,
> + .halt_check = BRANCH_HALT_VOTED,
> + .hwcg_reg = 0x54298,
> + .hwcg_bit = 1,
> + .clkr = {
> + .enable_reg = 0x54298,
> + .enable_mask = BIT(0),
> + .hw.init = &(const struct clk_init_data) {
> + .name = "gcc_ddrss_ecpri_gsi_clk",
> + .parent_hws = (const struct clk_hw*[]) {
> + &gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_aon_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_ecpri_ahb_clk = {
> .halt_reg = 0x3a008,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -1447,14 +1467,13 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
>
> static struct clk_branch gcc_pcie_0_clkref_en = {
> .halt_reg = 0x9c004,
> - .halt_bit = 31,
> - .halt_check = BRANCH_HALT_ENABLE,
> + .halt_check = BRANCH_HALT,
> .clkr = {
> .enable_reg = 0x9c004,
> .enable_mask = BIT(0),
> .hw.init = &(const struct clk_init_data) {
> .name = "gcc_pcie_0_clkref_en",
> - .ops = &clk_branch_ops,
> + .ops = &clk_branch2_ops,
This sounds like a separate fix, clk_branch_ops seems to only concern
10+yo chips.
Konrad
> },
> },
> };
> @@ -2274,14 +2293,13 @@ static struct clk_branch gcc_tsc_etu_clk = {
>
> static struct clk_branch gcc_usb2_clkref_en = {
> .halt_reg = 0x9c008,
> - .halt_bit = 31,
> - .halt_check = BRANCH_HALT_ENABLE,
> + .halt_check = BRANCH_HALT,
> .clkr = {
> .enable_reg = 0x9c008,
> .enable_mask = BIT(0),
> .hw.init = &(const struct clk_init_data) {
> .name = "gcc_usb2_clkref_en",
> - .ops = &clk_branch_ops,
> + .ops = &clk_branch2_ops,
> },
> },
> };
> @@ -2523,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
> [GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
> [GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
> [GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
> + [GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
> + [GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
> };
>
> static const struct qcom_reset_map gcc_qdu1000_resets[] = {
Powered by blists - more mailing lists