[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6eff3085-ce81-06ae-f251-f9afc66e59e1@amd.com>
Date: Mon, 10 Jul 2023 12:53:42 +0200
From: Michal Simek <michal.simek@....com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: linux-kernel@...r.kernel.org, monstr@...str.eu,
michal.simek@...inx.com, git@...inx.com,
Conor Dooley <conor+dt@...nel.org>,
Harini Katakam <harini.katakam@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Grzeschik <m.grzeschik@...gutronix.de>,
Parth Gajjar <parth.gajjar@....com>,
Piyush Mehta <piyush.mehta@...inx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@....com>,
Rob Herring <robh+dt@...nel.org>,
Robert Hancock <robert.hancock@...ian.com>,
Tanmay Shah <tanmay.shah@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] arm64: zynqmp: Fix dwc3 usb interrupt description
On 6/21/23 16:13, Laurent Pinchart wrote:
> Hi Michal,
>
> Thank you for the patch.
>
> On Mon, Jun 19, 2023 at 09:37:54AM +0200, Michal Simek wrote:
>> Based on DT binding dwc_usb3 is single entry without anything else. That's
>> why combination dwc3_usb3, otg is not allowed. That's why split it to host
>> and peripheral pair which both points to the same IRQ.
>> DWC3 code is reading these two properties first before generic dwc_usb3.
>>
>> Signed-off-by: Michal Simek <michal.simek@....com>
>> ---
>>
>> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> index 02cfcc716936..e8104ffc6663 100644
>> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
>> @@ -888,8 +888,8 @@ dwc3_0: usb@...00000 {
>> compatible = "snps,dwc3";
>> reg = <0x0 0xfe200000 0x0 0x40000>;
>> interrupt-parent = <&gic>;
>> - interrupt-names = "dwc_usb3", "otg";
>> - interrupts = <0 65 4>, <0 69 4>;
>> + interrupt-names = "host", "peripheral", "otg";
>> + interrupts = <0 65 4>, <0 65 4>, <0 69 4>;
>
> This should read
>
> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>
> The issue isn't introduced by this patch, so it should probably be fixed
> by a separate patch on top, to convert the whole zynqmp.dtsi file. Do
> you have any plan to do so, or should I ?
I have sent it here.
https://lore.kernel.org/r/9d5bd17f37772be186cab17b06cc21351d36ff62.1688986332.git.michal.simek@amd.com
Feel free to review it.
Thanks,
Michal
Powered by blists - more mailing lists