[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bcd02a91-e7c0-a104-f19c-50b26c86e484@quicinc.com>
Date: Mon, 10 Jul 2023 19:00:58 +0530
From: Praveenkumar I <quic_ipkumar@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <amitk@...nel.org>,
<thara.gopinath@...il.com>, <rafael@...nel.org>,
<daniel.lezcano@...aro.org>, <rui.zhang@...el.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <quic_varada@...cinc.com>
Subject: Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes
On 7/10/2023 4:53 PM, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@...cinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>> 1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>> <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>,
>> <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) |
>> IRQ_TYPE_LEVEL_LOW)>;
>> };
>> +
>> + thermal-zones {
>> + rfa-0-thermal{
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 11>;
>> +
>> + trips {
>> + rfa-0-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + rfa-1-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 12>;
>> +
>> + trips {
>> + rfa-1-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + misc-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 13>;
>> +
>> + trips {
>> + misc-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + cpu-top-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 14>;
>> +
>> + trips {
>> + cpu-top-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>
> Could you please add a passive cooling devices for the CPU?
Sure, will add the passive trip.
>
>> + };
>> +
>> + top-glue-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 15>;
>> +
>> + trips {
>> + top-glue-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> + };
>> };
>
--
Thanks,
Praveenkumar
Powered by blists - more mailing lists