| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGETcx8kH8cJVdhcv5K4qNUo58godFZEBnOfTGKUUQ6VuUguvQ@mail.gmail.com>
Date: Thu, 13 Jul 2023 16:56:22 -0700
From: Saravana Kannan <saravanak@...gle.com>
To: Anup Patel <apatel@...tanamicro.com>
Cc: Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Atish Patra <atishp@...shpatra.org>,
Andrew Jones <ajones@...tanamicro.com>,
Sunil V L <sunilvl@...tanamicro.com>,
Conor Dooley <conor@...nel.org>,
Anup Patel <anup@...infault.org>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v5 7/9] irqchip: Add RISC-V advanced PLIC driver
On Mon, Jul 10, 2023 at 2:44 AM Anup Patel <apatel@...tanamicro.com> wrote:
>
> The RISC-V advanced interrupt architecture (AIA) specification defines
> a new interrupt controller for managing wired interrupts on a RISC-V
> platform. This new interrupt controller is referred to as advanced
> platform-level interrupt controller (APLIC) which can forward wired
> interrupts to CPUs (or HARTs) as local interrupts OR as message
> signaled interrupts.
> (For more details refer https://github.com/riscv/riscv-aia)
>
> This patch adds an irqchip driver for RISC-V APLIC found on RISC-V
> platforms.
>
> Signed-off-by: Anup Patel <apatel@...tanamicro.com>
> ---
> drivers/irqchip/Kconfig | 6 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-riscv-aplic.c | 774 ++++++++++++++++++++++++++++
> include/linux/irqchip/riscv-aplic.h | 119 +++++
> 4 files changed, 900 insertions(+)
> create mode 100644 drivers/irqchip/irq-riscv-aplic.c
> create mode 100644 include/linux/irqchip/riscv-aplic.h
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index d700980372ef..834c0329f583 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -544,6 +544,12 @@ config SIFIVE_PLIC
> select IRQ_DOMAIN_HIERARCHY
> select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
>
> +config RISCV_APLIC
> + bool
> + depends on RISCV
> + select IRQ_DOMAIN_HIERARCHY
> + select GENERIC_MSI_IRQ
> +
> config RISCV_IMSIC
> bool
> depends on RISCV
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 577bde3e986b..438b8e1a152c 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
> obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
> obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
> +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o
> obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c
> new file mode 100644
> index 000000000000..b4db29d4179b
> --- /dev/null
> +++ b/drivers/irqchip/irq-riscv-aplic.c
> @@ -0,0 +1,774 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> + * Copyright (C) 2022 Ventana Micro Systems Inc.
> + */
> +
> +#define pr_fmt(fmt) "riscv-aplic: " fmt
> +#include <linux/bitops.h>
> +#include <linux/cpu.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqchip/riscv-aplic.h>
> +#include <linux/irqchip/riscv-imsic.h>
> +#include <linux/irqdomain.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/platform_device.h>
> +#include <linux/smp.h>
> +
> +#define APLIC_DEFAULT_PRIORITY 1
> +#define APLIC_DISABLE_IDELIVERY 0
> +#define APLIC_ENABLE_IDELIVERY 1
> +#define APLIC_DISABLE_ITHRESHOLD 1
> +#define APLIC_ENABLE_ITHRESHOLD 0
> +
> +struct aplic_msicfg {
> + phys_addr_t base_ppn;
> + u32 hhxs;
> + u32 hhxw;
> + u32 lhxs;
> + u32 lhxw;
> +};
> +
> +struct aplic_idc {
> + unsigned int hart_index;
> + void __iomem *regs;
> + struct aplic_priv *priv;
> +};
> +
> +struct aplic_priv {
> + struct fwnode_handle *fwnode;
> + u32 gsi_base;
> + u32 nr_irqs;
> + u32 nr_idcs;
> + void __iomem *regs;
> + struct irq_domain *irqdomain;
> + struct aplic_msicfg msicfg;
> + struct cpumask lmask;
> +};
> +
> +static unsigned int aplic_idc_parent_irq;
> +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs);
> +
> +static void aplic_irq_unmask(struct irq_data *d)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + writel(d->hwirq, priv->regs + APLIC_SETIENUM);
> +
> + if (!priv->nr_idcs)
> + irq_chip_unmask_parent(d);
> +}
> +
> +static void aplic_irq_mask(struct irq_data *d)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + writel(d->hwirq, priv->regs + APLIC_CLRIENUM);
> +
> + if (!priv->nr_idcs)
> + irq_chip_mask_parent(d);
> +}
> +
> +static int aplic_set_type(struct irq_data *d, unsigned int type)
> +{
> + u32 val = 0;
> + void __iomem *sourcecfg;
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> +
> + switch (type) {
> + case IRQ_TYPE_NONE:
> + val = APLIC_SOURCECFG_SM_INACTIVE;
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + val = APLIC_SOURCECFG_SM_LEVEL_LOW;
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + val = APLIC_SOURCECFG_SM_LEVEL_HIGH;
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + val = APLIC_SOURCECFG_SM_EDGE_FALL;
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + val = APLIC_SOURCECFG_SM_EDGE_RISE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE;
> + sourcecfg += (d->hwirq - 1) * sizeof(u32);
> + writel(val, sourcecfg);
> +
> + return 0;
> +}
> +
> +static void aplic_irq_eoi(struct irq_data *d)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> + u32 reg_off, reg_mask;
> +
> + /*
> + * EOI handling only required only for level-triggered
> + * interrupts in APLIC MSI mode.
> + */
> +
> + if (priv->nr_idcs)
> + return;
> +
> + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4);
> + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG);
> + switch (irqd_get_trigger_type(d)) {
> + case IRQ_TYPE_LEVEL_LOW:
> + if (!(readl(priv->regs + reg_off) & reg_mask))
> + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE);
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + if (readl(priv->regs + reg_off) & reg_mask)
> + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE);
> + break;
> + }
> +}
> +
> +#ifdef CONFIG_SMP
> +static int aplic_set_affinity(struct irq_data *d,
> + const struct cpumask *mask_val, bool force)
> +{
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> + struct aplic_idc *idc;
> + unsigned int cpu, val;
> + struct cpumask amask;
> + void __iomem *target;
> +
> + if (!priv->nr_idcs)
> + return irq_chip_set_affinity_parent(d, mask_val, force);
> +
> + cpumask_and(&amask, &priv->lmask, mask_val);
> +
> + if (force)
> + cpu = cpumask_first(&amask);
> + else
> + cpu = cpumask_any_and(&amask, cpu_online_mask);
> +
> + if (cpu >= nr_cpu_ids)
> + return -EINVAL;
> +
> + idc = per_cpu_ptr(&aplic_idcs, cpu);
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
> + val <<= APLIC_TARGET_HART_IDX_SHIFT;
> + val |= APLIC_DEFAULT_PRIORITY;
> + writel(val, target);
> +
> + irq_data_update_effective_affinity(d, cpumask_of(cpu));
> +
> + return IRQ_SET_MASK_OK_DONE;
> +}
> +#endif
> +
> +static struct irq_chip aplic_chip = {
> + .name = "RISC-V APLIC",
> + .irq_mask = aplic_irq_mask,
> + .irq_unmask = aplic_irq_unmask,
> + .irq_set_type = aplic_set_type,
> + .irq_eoi = aplic_irq_eoi,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = aplic_set_affinity,
> +#endif
> + .flags = IRQCHIP_SET_TYPE_MASKED |
> + IRQCHIP_SKIP_SET_WAKE |
> + IRQCHIP_MASK_ON_SUSPEND,
> +};
> +
> +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec,
> + u32 gsi_base,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + if (WARN_ON(fwspec->param_count < 2))
> + return -EINVAL;
> + if (WARN_ON(!fwspec->param[0]))
> + return -EINVAL;
> +
> + /* For DT, gsi_base is always zero. */
> + *hwirq = fwspec->param[0] - gsi_base;
> + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> +
> + WARN_ON(*type == IRQ_TYPE_NONE);
> +
> + return 0;
> +}
> +
> +static int aplic_irqdomain_msi_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct aplic_priv *priv = platform_msi_get_host_data(d);
> +
> + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type);
> +}
> +
> +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + int i, ret;
> + unsigned int type;
> + irq_hw_number_t hwirq;
> + struct irq_fwspec *fwspec = arg;
> + struct aplic_priv *priv = platform_msi_get_host_data(domain);
> +
> + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_domain_set_info(domain, virq + i, hwirq + i,
> + &aplic_chip, priv, handle_fasteoi_irq,
> + NULL, NULL);
> + /*
> + * APLIC does not implement irq_disable() so Linux interrupt
> + * subsystem will take a lazy approach for disabling an APLIC
> + * interrupt. This means APLIC interrupts are left unmasked
> + * upon system suspend and interrupts are not processed
> + * immediately upon system wake up. To tackle this, we disable
> + * the lazy approach for all APLIC interrupts.
> + */
> + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
> + }
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aplic_irqdomain_msi_ops = {
> + .translate = aplic_irqdomain_msi_translate,
> + .alloc = aplic_irqdomain_msi_alloc,
> + .free = platform_msi_device_domain_free,
> +};
> +
> +static int aplic_irqdomain_idc_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct aplic_priv *priv = d->host_data;
> +
> + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type);
> +}
> +
> +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + int i, ret;
> + unsigned int type;
> + irq_hw_number_t hwirq;
> + struct irq_fwspec *fwspec = arg;
> + struct aplic_priv *priv = domain->host_data;
> +
> + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_domain_set_info(domain, virq + i, hwirq + i,
> + &aplic_chip, priv, handle_fasteoi_irq,
> + NULL, NULL);
> + irq_set_affinity(virq + i, &priv->lmask);
> + /* See the reason described in aplic_irqdomain_msi_alloc() */
> + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
> + }
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops aplic_irqdomain_idc_ops = {
> + .translate = aplic_irqdomain_idc_translate,
> + .alloc = aplic_irqdomain_idc_alloc,
> + .free = irq_domain_free_irqs_top,
> +};
> +
> +static void aplic_init_hw_irqs(struct aplic_priv *priv)
> +{
> + int i;
> +
> + /* Disable all interrupts */
> + for (i = 0; i <= priv->nr_irqs; i += 32)
> + writel(-1U, priv->regs + APLIC_CLRIE_BASE +
> + (i / 32) * sizeof(u32));
> +
> + /* Set interrupt type and default priority for all interrupts */
> + for (i = 1; i <= priv->nr_irqs; i++) {
> + writel(0, priv->regs + APLIC_SOURCECFG_BASE +
> + (i - 1) * sizeof(u32));
> + writel(APLIC_DEFAULT_PRIORITY,
> + priv->regs + APLIC_TARGET_BASE +
> + (i - 1) * sizeof(u32));
> + }
> +
> + /* Clear APLIC domaincfg */
> + writel(0, priv->regs + APLIC_DOMAINCFG);
> +}
> +
> +static void aplic_init_hw_global(struct aplic_priv *priv)
> +{
> + u32 val;
> +#ifdef CONFIG_RISCV_M_MODE
> + u32 valH;
> +
> + if (!priv->nr_idcs) {
> + val = priv->msicfg.base_ppn;
> + valH = (priv->msicfg.base_ppn >> 32) &
> + APLIC_xMSICFGADDRH_BAPPN_MASK;
> + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK)
> + << APLIC_xMSICFGADDRH_LHXW_SHIFT;
> + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK)
> + << APLIC_xMSICFGADDRH_HHXW_SHIFT;
> + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK)
> + << APLIC_xMSICFGADDRH_LHXS_SHIFT;
> + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK)
> + << APLIC_xMSICFGADDRH_HHXS_SHIFT;
> + writel(val, priv->regs + APLIC_xMSICFGADDR);
> + writel(valH, priv->regs + APLIC_xMSICFGADDRH);
> + }
> +#endif
> +
> + /* Setup APLIC domaincfg register */
> + val = readl(priv->regs + APLIC_DOMAINCFG);
> + val |= APLIC_DOMAINCFG_IE;
> + if (!priv->nr_idcs)
> + val |= APLIC_DOMAINCFG_DM;
> + writel(val, priv->regs + APLIC_DOMAINCFG);
> + if (readl(priv->regs + APLIC_DOMAINCFG) != val)
> + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n",
> + priv->fwnode, val);
> +}
> +
> +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> +{
> + unsigned int group_index, hart_index, guest_index, val;
> + struct irq_data *d = irq_get_irq_data(desc->irq);
> + struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
> + struct aplic_msicfg *mc = &priv->msicfg;
> + phys_addr_t tppn, tbppn, msg_addr;
> + void __iomem *target;
> +
> + /* For zeroed MSI, simply write zero into the target register */
> + if (!msg->address_hi && !msg->address_lo && !msg->data) {
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + writel(0, target);
> + return;
> + }
> +
> + /* Sanity check on message data */
> + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK);
> +
> + /* Compute target MSI address */
> + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo;
> + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
> +
> + /* Compute target HART Base PPN */
> + tbppn = tppn;
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
> + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
> + WARN_ON(tbppn != mc->base_ppn);
> +
> + /* Compute target group and hart indexes */
> + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) &
> + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw);
> + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) &
> + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw);
> + hart_index |= (group_index << mc->lhxw);
> + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK);
> +
> + /* Compute target guest index */
> + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK);
> +
> + /* Update IRQ TARGET register */
> + target = priv->regs + APLIC_TARGET_BASE;
> + target += (d->hwirq - 1) * sizeof(u32);
> + val = (hart_index & APLIC_TARGET_HART_IDX_MASK)
> + << APLIC_TARGET_HART_IDX_SHIFT;
> + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK)
> + << APLIC_TARGET_GUEST_IDX_SHIFT;
> + val |= (msg->data & APLIC_TARGET_EIID_MASK);
> + writel(val, target);
> +}
> +
> +static int aplic_setup_msi(struct aplic_priv *priv)
> +{
> + struct aplic_msicfg *mc = &priv->msicfg;
> + const struct imsic_global_config *imsic_global;
> +
> + /*
> + * The APLIC outgoing MSI config registers assume target MSI
> + * controller to be RISC-V AIA IMSIC controller.
> + */
> + imsic_global = imsic_get_global_config();
> + if (!imsic_global) {
> + pr_err("%pfwP: IMSIC global config not found\n",
> + priv->fwnode);
> + return -ENODEV;
> + }
> +
> + /* Find number of guest index bits (LHXS) */
> + mc->lhxs = imsic_global->guest_index_bits;
> + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) {
> + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n",
> + priv->fwnode);
> + return -EINVAL;
> + }
> +
> + /* Find number of HART index bits (LHXW) */
> + mc->lhxw = imsic_global->hart_index_bits;
> + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) {
> + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n",
> + priv->fwnode);
> + return -EINVAL;
> + }
> +
> + /* Find number of group index bits (HHXW) */
> + mc->hhxw = imsic_global->group_index_bits;
> + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) {
> + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n",
> + priv->fwnode);
> + return -EINVAL;
> + }
> +
> + /* Find first bit position of group index (HHXS) */
> + mc->hhxs = imsic_global->group_index_shift;
> + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) {
> + pr_err("%pfwP: IMSIC group index shift should be >= %d\n",
> + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT));
> + return -EINVAL;
> + }
> + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT);
> + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) {
> + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n",
> + priv->fwnode);
> + return -EINVAL;
> + }
> +
> + /* Compute PPN base */
> + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
> + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
> +
> + /* Use all possible CPUs as lmask */
> + cpumask_copy(&priv->lmask, cpu_possible_mask);
> +
> + return 0;
> +}
> +
> +/*
> + * To handle an APLIC IDC interrupts, we just read the CLAIMI register
> + * which will return highest priority pending interrupt and clear the
> + * pending bit of the interrupt. This process is repeated until CLAIMI
> + * register return zero value.
> + */
> +static void aplic_idc_handle_irq(struct irq_desc *desc)
> +{
> + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + irq_hw_number_t hw_irq;
> + int irq;
> +
> + chained_irq_enter(chip, desc);
> +
> + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
> + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
> + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq);
> +
> + if (unlikely(irq <= 0))
> + pr_warn_ratelimited("hw_irq %lu mapping not found\n",
> + hw_irq);
> + else
> + generic_handle_irq(irq);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en)
> +{
> + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY;
> + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD;
> +
> + /* Priority must be less than threshold for interrupt triggering */
> + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD);
> +
> + /* Delivery must be set to 1 for interrupt triggering */
> + writel(de, idc->regs + APLIC_IDC_IDELIVERY);
> +}
> +
> +static int aplic_idc_dying_cpu(unsigned int cpu)
> +{
> + if (aplic_idc_parent_irq)
> + disable_percpu_irq(aplic_idc_parent_irq);
> +
> + return 0;
> +}
> +
> +static int aplic_idc_starting_cpu(unsigned int cpu)
> +{
> + if (aplic_idc_parent_irq)
> + enable_percpu_irq(aplic_idc_parent_irq,
> + irq_get_trigger_type(aplic_idc_parent_irq));
> +
> + return 0;
> +}
> +
> +static int aplic_setup_idc(struct aplic_priv *priv)
> +{
> + int i, j, rc, cpu, setup_count = 0;
> + struct fwnode_reference_args parent;
> + struct irq_domain *domain;
> + unsigned long hartid;
> + struct aplic_idc *idc;
> + u32 val;
> +
> + /* Setup per-CPU IDC and target CPU mask */
> + for (i = 0; i < priv->nr_idcs; i++) {
> + rc = fwnode_property_get_reference_args(priv->fwnode,
> + "interrupts-extended", "#interrupt-cells",
> + 0, i, &parent);
> + if (rc) {
> + pr_warn("%pfwP: parent irq for IDC%d not found\n",
> + priv->fwnode, i);
> + continue;
> + }
> +
> + /*
> + * Skip interrupts other than external interrupts for
> + * current privilege level.
> + */
> + if (parent.args[0] != RV_IRQ_EXT)
> + continue;
> +
> + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid);
> + if (rc) {
> + pr_warn("%pfwP: invalid hartid for IDC%d\n",
> + priv->fwnode, i);
> + continue;
> + }
> +
> + cpu = riscv_hartid_to_cpuid(hartid);
> + if (cpu < 0) {
> + pr_warn("%pfwP: invalid cpuid for IDC%d\n",
> + priv->fwnode, i);
> + continue;
> + }
> +
> + cpumask_set_cpu(cpu, &priv->lmask);
> +
> + idc = per_cpu_ptr(&aplic_idcs, cpu);
> + idc->hart_index = i;
> + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE;
> + idc->priv = priv;
> +
> + aplic_idc_set_delivery(idc, true);
> +
> + /*
> + * Boot cpu might not have APLIC hart_index = 0 so check
> + * and update target registers of all interrupts.
> + */
> + if (cpu == smp_processor_id() && idc->hart_index) {
> + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
> + val <<= APLIC_TARGET_HART_IDX_SHIFT;
> + val |= APLIC_DEFAULT_PRIORITY;
> + for (j = 1; j <= priv->nr_irqs; j++)
> + writel(val, priv->regs + APLIC_TARGET_BASE +
> + (j - 1) * sizeof(u32));
> + }
> +
> + setup_count++;
> + }
> +
> + /* Find parent domain and register chained handler */
> + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
> + DOMAIN_BUS_ANY);
> + if (!aplic_idc_parent_irq && domain) {
> + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
> + if (aplic_idc_parent_irq) {
> + irq_set_chained_handler(aplic_idc_parent_irq,
> + aplic_idc_handle_irq);
> +
> + /*
> + * Setup CPUHP notifier to enable IDC parent
> + * interrupt on all CPUs
> + */
> + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> + "irqchip/riscv/aplic:starting",
> + aplic_idc_starting_cpu,
> + aplic_idc_dying_cpu);
> + }
> + }
> +
> + /* Fail if we were not able to setup IDC for any CPU */
> + return (setup_count) ? 0 : -ENODEV;
> +}
> +
> +static int aplic_probe(struct platform_device *pdev)
> +{
> + struct fwnode_handle *fwnode = pdev->dev.fwnode;
> + struct fwnode_reference_args parent;
> + struct aplic_priv *priv;
> + struct resource *res;
> + phys_addr_t pa;
> + int rc;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> + priv->fwnode = fwnode;
> +
> + /* Map the MMIO registers */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + pr_err("%pfwP: failed to get MMIO resource\n", fwnode);
> + return -EINVAL;
> + }
> + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> + if (!priv->regs) {
> + pr_err("%pfwP: failed map MMIO registers\n", fwnode);
> + return -ENOMEM;
> + }
> +
> + /*
> + * Find out GSI base number
> + *
> + * Note: DT does not define "riscv,gsi-base" property so GSI
> + * base is always zero for DT.
> + */
> + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base",
> + &priv->gsi_base, 1);
> + if (rc)
> + priv->gsi_base = 0;
> +
> + /* Find out number of interrupt sources */
> + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources",
> + &priv->nr_irqs, 1);
> + if (rc) {
> + pr_err("%pfwP: failed to get number of interrupt sources\n",
> + fwnode);
> + return rc;
> + }
> +
> + /* Setup initial state APLIC interrupts */
> + aplic_init_hw_irqs(priv);
> +
> + /*
> + * Find out number of IDCs based on parent interrupts
> + *
> + * If "msi-parent" property is present then we ignore the
> + * APLIC IDCs which forces the APLIC driver to use MSI mode.
> + */
> + if (!fwnode_property_present(fwnode, "msi-parent")) {
> + while (!fwnode_property_get_reference_args(fwnode,
> + "interrupts-extended", "#interrupt-cells",
> + 0, priv->nr_idcs, &parent))
> + priv->nr_idcs++;
> + }
> +
> + /* Setup IDCs or MSIs based on number of IDCs */
> + if (priv->nr_idcs)
> + rc = aplic_setup_idc(priv);
> + else
> + rc = aplic_setup_msi(priv);
> + if (rc) {
> + pr_err("%pfwP: failed setup %s\n",
> + fwnode, priv->nr_idcs ? "IDCs" : "MSIs");
> + return rc;
> + }
> +
> + /* Setup global config and interrupt delivery */
> + aplic_init_hw_global(priv);
> +
> + /* Create irq domain instance for the APLIC */
> + if (priv->nr_idcs)
> + priv->irqdomain = irq_domain_create_linear(
> + priv->fwnode,
> + priv->nr_irqs + 1,
> + &aplic_irqdomain_idc_ops,
> + priv);
> + else
> + priv->irqdomain = platform_msi_create_device_domain(
> + &pdev->dev,
> + priv->nr_irqs + 1,
> + aplic_msi_write_msg,
> + &aplic_irqdomain_msi_ops,
> + priv);
> + if (!priv->irqdomain) {
> + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode);
> + return -ENOMEM;
> + }
> +
> + /* Advertise the interrupt controller */
> + if (priv->nr_idcs) {
> + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n",
> + priv->fwnode, priv->nr_irqs, priv->nr_idcs);
> + } else {
> + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT;
> + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n",
> + priv->fwnode, priv->nr_irqs, &pa);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aplic_match[] = {
> + { .compatible = "riscv,aplic" },
> + {}
> +};
> +
> +static struct platform_driver aplic_driver = {
> + .driver = {
> + .name = "riscv-aplic",
> + .of_match_table = aplic_match,
> + },
> + .probe = aplic_probe,
> +};
> +
> +static int __init aplic_init(void)
> +{
> + /*
> + * Register APLIC driver as early as possible so that APLIC
> + * platform device is probed as soon as it is created.
> + */
> + return platform_driver_register(&aplic_driver);
> +}
> +core_initcall(aplic_init);
> +
> +static int __init aplic_dt_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + /*
> + * The APLIC platform driver needs to be probed early
> + * so for device tree:
> + *
> + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which
> + * provides a hint to the device driver core to probe the
> + * platform driver early.
> + * 2) Clear the OF_POPULATED flag in device_node because
> + * of_irq_init() sets it which prevents creation of
> + * platform device.
> + */
> + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT;
Please stop spamming us with broken patches. Already told you this is
not an option.
Nack.
-Saravana
> + of_node_clear_flag(node, OF_POPULATED);
> + return 0;
> +}
> +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init);
> diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h
> new file mode 100644
> index 000000000000..97e198ea0109
> --- /dev/null
> +++ b/include/linux/irqchip/riscv-aplic.h
> @@ -0,0 +1,119 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> + * Copyright (C) 2022 Ventana Micro Systems Inc.
> + */
> +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H
> +#define __LINUX_IRQCHIP_RISCV_APLIC_H
> +
> +#include <linux/bitops.h>
> +
> +#define APLIC_MAX_IDC BIT(14)
> +#define APLIC_MAX_SOURCE 1024
> +
> +#define APLIC_DOMAINCFG 0x0000
> +#define APLIC_DOMAINCFG_RDONLY 0x80000000
> +#define APLIC_DOMAINCFG_IE BIT(8)
> +#define APLIC_DOMAINCFG_DM BIT(2)
> +#define APLIC_DOMAINCFG_BE BIT(0)
> +
> +#define APLIC_SOURCECFG_BASE 0x0004
> +#define APLIC_SOURCECFG_D BIT(10)
> +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff
> +#define APLIC_SOURCECFG_SM_MASK 0x00000007
> +#define APLIC_SOURCECFG_SM_INACTIVE 0x0
> +#define APLIC_SOURCECFG_SM_DETACH 0x1
> +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4
> +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5
> +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6
> +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7
> +
> +#define APLIC_MMSICFGADDR 0x1bc0
> +#define APLIC_MMSICFGADDRH 0x1bc4
> +#define APLIC_SMSICFGADDR 0x1bc8
> +#define APLIC_SMSICFGADDRH 0x1bcc
> +
> +#ifdef CONFIG_RISCV_M_MODE
> +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR
> +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH
> +#else
> +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR
> +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH
> +#endif
> +
> +#define APLIC_xMSICFGADDRH_L BIT(31)
> +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f
> +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24
> +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7
> +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20
> +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7
> +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16
> +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf
> +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12
> +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff
> +
> +#define APLIC_xMSICFGADDR_PPN_SHIFT 12
> +
> +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \
> + (BIT(__lhxs) - 1)
> +
> +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \
> + (BIT(__lhxw) - 1)
> +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \
> + ((__lhxs))
> +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \
> + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \
> + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs))
> +
> +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \
> + (BIT(__hhxw) - 1)
> +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \
> + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT)
> +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \
> + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \
> + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs))
> +
> +#define APLIC_IRQBITS_PER_REG 32
> +
> +#define APLIC_SETIP_BASE 0x1c00
> +#define APLIC_SETIPNUM 0x1cdc
> +
> +#define APLIC_CLRIP_BASE 0x1d00
> +#define APLIC_CLRIPNUM 0x1ddc
> +
> +#define APLIC_SETIE_BASE 0x1e00
> +#define APLIC_SETIENUM 0x1edc
> +
> +#define APLIC_CLRIE_BASE 0x1f00
> +#define APLIC_CLRIENUM 0x1fdc
> +
> +#define APLIC_SETIPNUM_LE 0x2000
> +#define APLIC_SETIPNUM_BE 0x2004
> +
> +#define APLIC_GENMSI 0x3000
> +
> +#define APLIC_TARGET_BASE 0x3004
> +#define APLIC_TARGET_HART_IDX_SHIFT 18
> +#define APLIC_TARGET_HART_IDX_MASK 0x3fff
> +#define APLIC_TARGET_GUEST_IDX_SHIFT 12
> +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f
> +#define APLIC_TARGET_IPRIO_MASK 0xff
> +#define APLIC_TARGET_EIID_MASK 0x7ff
> +
> +#define APLIC_IDC_BASE 0x4000
> +#define APLIC_IDC_SIZE 32
> +
> +#define APLIC_IDC_IDELIVERY 0x00
> +
> +#define APLIC_IDC_IFORCE 0x04
> +
> +#define APLIC_IDC_ITHRESHOLD 0x08
> +
> +#define APLIC_IDC_TOPI 0x18
> +#define APLIC_IDC_TOPI_ID_SHIFT 16
> +#define APLIC_IDC_TOPI_ID_MASK 0x3ff
> +#define APLIC_IDC_TOPI_PRIO_MASK 0xff
> +
> +#define APLIC_IDC_CLAIMI 0x1c
> +
> +#endif
> --
> 2.34.1
>
Powered by blists - more mailing lists