[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8c5dc146-c305-bef9-0d97-76a91345ed1a@linaro.org>
Date: Mon, 17 Jul 2023 19:11:33 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Stephan Gerhold <stephan@...hold.net>
Cc: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 15/15] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CCC
On 17.07.2023 18:56, Stephan Gerhold wrote:
> On Mon, Jul 17, 2023 at 06:50:18PM +0200, Konrad Dybcio wrote:
>> On 17.07.2023 18:28, Stephan Gerhold wrote:
>>> On Mon, Jul 17, 2023 at 05:19:22PM +0200, Konrad Dybcio wrote:
>>>> The GPU_CC block is powered by VDD_CX. Describe that.
>>>>
>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
>>>> 1 file changed, 2 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> index 29b5b388cd94..bfaaa1801a4d 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> @@ -1430,6 +1430,8 @@ gpucc: clock-controller@...0000 {
>>>> clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
>>>> <&gcc GCC_GPU_GPLL0_CLK_SRC>,
>>>> <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
>>>> + power-domains = <&rpmpd SM6115_VDDCX>;
>>>> + required-opps = <&rpmpd_opp_low_svs>;
>>>
>>> Where is this required-opp coming from? The clocks in gpucc seem to have
>>> different voltage requirements depending on the rates, but we usually
>>> handle that in the OPP tables of the consumer.
>> The only lower levels defined for this SoC are VDD_MIN and VDD_RET,
>> but quite obviously the GPU won't work then
>>
>
> The levels needed for the GPU clocks to run should be in the GPU OPP
> table though, just like e.g. sdhc2_opp_table for the SDCC clocks.
>
> I still don't really understand why this is specified here. :)
The GPU_CC block needs this rail to be at a certain power level for
register access. This describes that requirement.
Konrad
Powered by blists - more mailing lists