[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <76c99543-4f77-38c2-5940-517f2715060d@linaro.org>
Date: Tue, 18 Jul 2023 10:40:37 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sm8450-hdk: add other analogue
microphones
On 17/07/2023 15:38, Krzysztof Kozlowski wrote:
> Add proper audio routes for onboard analogue microphones: AMIC[1345].
> Use also new DAPM input widget (TX SWR_INPUTn) for them, not the
> deprecated ADC one. Change is not compatible with older kernels not
> having the new SWR_INPUTn input widget.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
>
> Depends on ASoC driver changes:
> https://lore.kernel.org/alsa-devel/20230717140138.201745-1-krzysztof.kozlowski@linaro.org/T/#t
> This patch should wait till respective ASoC changes got merged.
> ---
> arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 23 ++++++++++++++++-------
> 1 file changed, 16 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index bd5e8181f2aa..9bd1ef401ca3 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -915,14 +915,23 @@ &sound {
> "SpkrRight IN", "WSA_SPK2 OUT",
> "IN1_HPHL", "HPHL_OUT",
> "IN2_HPHR", "HPHR_OUT",
> + "AMIC1", "MIC BIAS1",
> "AMIC2", "MIC BIAS2",
> - "VA DMIC0", "MIC BIAS1",
> - "VA DMIC1", "MIC BIAS1",
> - "VA DMIC2", "MIC BIAS3",
> - "TX DMIC0", "MIC BIAS1",
> - "TX DMIC1", "MIC BIAS2",
> - "TX DMIC2", "MIC BIAS3",
> - "TX SWR_ADC1", "ADC2_OUTPUT";
> + "AMIC3", "MIC BIAS3",
> + "AMIC4", "MIC BIAS3",
> + "AMIC5", "MIC BIAS4",
These should reflect the board-level wiring of MIC BIAS, are you sure
that this is how the hdk is wired up?
> + "VA DMIC0", "MIC BIAS3",
> + "VA DMIC1", "MIC BIAS3",
> + "VA DMIC2", "MIC BIAS1",
> + "VA DMIC3", "MIC BIAS1",
> + "TX DMIC0", "MIC BIAS3",
> + "TX DMIC1", "MIC BIAS3",
> + "TX DMIC2", "MIC BIAS1",
> + "TX DMIC3", "MIC BIAS1",
Same here.
--srini
> + "TX SWR_INPUT0", "ADC1_OUTPUT",
> + "TX SWR_INPUT1", "ADC2_OUTPUT",
> + "TX SWR_INPUT2", "ADC3_OUTPUT",
> + "TX SWR_INPUT3", "ADC4_OUTPUT";
>
> wcd-playback-dai-link {
> link-name = "WCD Playback";
Powered by blists - more mailing lists