| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Jul 2023 02:33:44 +0000
From: "Lee, Kah Jing" <kah.jing.lee@...el.com>
To: "dinguyen@...nel.org" <dinguyen@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Bacrau, Radu" <radu.bacrau@...el.com>,
"Ang, Tien Sung" <tien.sung.ang@...el.com>,
Teh Wen Ping <wen.ping.teh@...el.com>
Subject: RE: [PATCH v3 1/2] firmware: stratix10-svc: Generic Mailbox Command
Hi Dinh,
Any feedback on this patch ?
Thanks.
Regards,
Lee, Kah Jing
> -----Original Message-----
> From: Lee, Kah Jing <kah.jing.lee@...el.com>
> Sent: Monday, 17 July, 2023 9:50 AM
> To: dinguyen@...nel.org
> Cc: linux-kernel@...r.kernel.org; Bacrau, Radu <radu.bacrau@...el.com>;
> Ang, Tien Sung <tien.sung.ang@...el.com>; Teh Wen Ping
> <wen.ping.teh@...el.com>; Lee, Kah Jing <kah.jing.lee@...el.com>
> Subject: [PATCH v3 1/2] firmware: stratix10-svc: Generic Mailbox Command
>
> From: Teh Wen Ping <wen.ping.teh@...el.com>
>
> Add generic mailbox command that can support SDM command. User can
> use this command to send SDM mailbox command. User have to specified an
> input file which contain the command data and an output file for SDM
> response to be copied over.
>
> Signed-off-by: Teh Wen Ping <wen.ping.teh@...el.com>
> Signed-off-by: Kah Jing Lee <kah.jing.lee@...el.com>
> ---
> drivers/firmware/stratix10-svc.c | 18 +++++++++++++
> include/linux/firmware/intel/stratix10-smc.h | 25 +++++++++++++++++++
> .../firmware/intel/stratix10-svc-client.h | 5 ++++
> 3 files changed, 48 insertions(+)
>
> diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-
> svc.c
> index 2d674126160f..260695a8a9e6 100644
> --- a/drivers/firmware/stratix10-svc.c
> +++ b/drivers/firmware/stratix10-svc.c
> @@ -37,6 +37,7 @@
> #define SVC_NUM_CHANNEL 3
> #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
> #define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
> +#define BYTE_TO_WORD_SIZE 4
>
> /* stratix10 service layer clients */
> #define STRATIX10_RSU "stratix10-rsu"
> @@ -361,6 +362,13 @@ static void svc_thread_recv_status_ok(struct
> stratix10_svc_data *p_data,
> cb_data->kaddr2 = svc_pa_to_va(res.a2);
> cb_data->kaddr3 = &res.a3;
> break;
> + case COMMAND_MBOX_SEND_CMD:
> + cb_data->status = BIT(SVC_STATUS_OK);
> + cb_data->kaddr1 = &res.a1;
> + /* SDM return size in u8. Convert size to u32 word */
> + res.a2 = res.a2 * BYTE_TO_WORD_SIZE;
> + cb_data->kaddr2 = &res.a2;
> + break;
> default:
> pr_warn("it shouldn't happen\n");
> break;
> @@ -534,6 +542,15 @@ static int svc_normal_to_secure_thread(void *data)
> a1 = 0;
> a2 = 0;
> break;
> + case COMMAND_MBOX_SEND_CMD:
> + a0 = INTEL_SIP_SMC_MBOX_SEND_CMD;
> + a1 = pdata->arg[0];
> + a2 = (unsigned long)pdata->paddr;
> + a3 = (unsigned long)pdata->size /
> BYTE_TO_WORD_SIZE;
> + a4 = pdata->arg[1];
> + a5 = (unsigned long)pdata->paddr_output;
> + a6 = (unsigned long)pdata->size_output /
> BYTE_TO_WORD_SIZE;
> + break;
> default:
> pr_warn("it shouldn't happen\n");
> break;
> @@ -597,6 +614,7 @@ static int svc_normal_to_secure_thread(void *data)
> case COMMAND_FCS_DATA_ENCRYPTION:
> case COMMAND_FCS_DATA_DECRYPTION:
> case COMMAND_FCS_RANDOM_NUMBER_GEN:
> + case COMMAND_MBOX_SEND_CMD:
> cbdata->status =
> BIT(SVC_STATUS_INVALID_PARAM);
> cbdata->kaddr1 = NULL;
> cbdata->kaddr2 = NULL;
> diff --git a/include/linux/firmware/intel/stratix10-smc.h
> b/include/linux/firmware/intel/stratix10-smc.h
> index a718f853d457..ee80ca4bb0d0 100644
> --- a/include/linux/firmware/intel/stratix10-smc.h
> +++ b/include/linux/firmware/intel/stratix10-smc.h
> @@ -466,6 +466,31 @@
> INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_
> COMPLETED_WRITE)
> #define INTEL_SIP_SMC_FIRMWARE_VERSION \
>
> INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FIRMWARE_VE
> RSION)
>
> +/**
> + * SMC call protocol for Mailbox, starting FUNCID from 60
> + *
> + * Call register usage:
> + * a0 INTEL_SIP_SMC_MBOX_SEND_CMD
> + * a1 mailbox command code
> + * a2 physical address that contain mailbox command data (not include
> +header)
> + * a3 mailbox command data size in word
> + * a4 set to 0 for CASUAL, set to 1 for URGENT
> + * a5 physical address for secure firmware to put response data
> + * (not include header)
> + * a6 maximum size in word of physical address to store response data
> + * a7 not used
> + *
> + * Return status
> + * a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_REJECTED or
> + * INTEL_SIP_SMC_STATUS_ERROR
> + * a1 mailbox error code
> + * a2 response data length in word
> + * a3 not used
> + */
> +#define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD 60
> + #define INTEL_SIP_SMC_MBOX_SEND_CMD \
> +
> INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_
> SEND_CMD)
> +
> /**
> * Request INTEL_SIP_SMC_SVC_VERSION
> *
> diff --git a/include/linux/firmware/intel/stratix10-svc-client.h
> b/include/linux/firmware/intel/stratix10-svc-client.h
> index 0c16037fd08d..60ed82112680 100644
> --- a/include/linux/firmware/intel/stratix10-svc-client.h
> +++ b/include/linux/firmware/intel/stratix10-svc-client.h
> @@ -118,6 +118,9 @@ struct stratix10_svc_chan;
> * @COMMAND_SMC_SVC_VERSION: Non-mailbox SMC SVC API Version,
> * return status is SVC_STATUS_OK
> *
> + * @COMMAND_MBOX_SEND_CMD: send generic mailbox command,
> return status
> + is
> + * SVC_STATUS_OK or SVC_STATUS_ERROR
> + *
> * @COMMAND_RSU_DCMF_STATUS: query firmware for the DCMF status
> * return status is SVC_STATUS_OK or SVC_STATUS_ERROR
> *
> @@ -164,6 +167,8 @@ enum stratix10_svc_command_code {
> COMMAND_FCS_RANDOM_NUMBER_GEN,
> /* for general status poll */
> COMMAND_POLL_SERVICE_STATUS = 40,
> + /* for generic mailbox send command */
> + COMMAND_MBOX_SEND_CMD = 100,
> /* Non-mailbox SMC Call */
> COMMAND_SMC_SVC_VERSION = 200,
> };
> --
> 2.25.1
Powered by blists - more mailing lists