| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <PH0PR11MB56738D1373C7B2FEA7D947A9CB3FA@PH0PR11MB5673.namprd11.prod.outlook.com>
Date: Fri, 21 Jul 2023 02:34:05 +0000
From: "Lee, Kah Jing" <kah.jing.lee@...el.com>
To: "dinguyen@...nel.org" <dinguyen@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Bacrau, Radu" <radu.bacrau@...el.com>,
"Ang, Tien Sung" <tien.sung.ang@...el.com>
Subject: RE: [PATCH v3 2/2] firmware: stratix10-rsu: query spt addresses
Hi Dinh,
Any feedback on this patch ?
Thanks.
Regards,
Lee, Kah Jing
> -----Original Message-----
> From: Lee, Kah Jing <kah.jing.lee@...el.com>
> Sent: Monday, 17 July, 2023 9:50 AM
> To: dinguyen@...nel.org
> Cc: linux-kernel@...r.kernel.org; Bacrau, Radu <radu.bacrau@...el.com>;
> Ang, Tien Sung <tien.sung.ang@...el.com>; Lee, Kah Jing
> <kah.jing.lee@...el.com>
> Subject: [PATCH v3 2/2] firmware: stratix10-rsu: query spt addresses
>
> From: Radu Bacrau <radu.bacrau@...el.com>
>
> Extend Intel Remote System Update (RSU) driver to get SPT (Sub-Partition
> Table) addresses. The query SPT address can be used to determine if the
> RSU QSPI layout is 32kB or 64kB aligned.
> The alignment can be determined by minus the upper with the lower of the
> SPT addresses.
>
> This patch depends on patch:
> firmware: stratix10-svc: Generic Mailbox Command
>
> Signed-off-by: Radu Bacrau <radu.bacrau@...el.com>
> Signed-off-by: Kah Jing Lee <kah.jing.lee@...el.com>
> ---
> drivers/firmware/stratix10-rsu.c | 100
> ++++++++++++++++++++++++++++++-
> 1 file changed, 99 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-
> rsu.c
> index e51c95f8d445..af71f921be5f 100644
> --- a/drivers/firmware/stratix10-rsu.c
> +++ b/drivers/firmware/stratix10-rsu.c
> @@ -34,6 +34,10 @@
> #define INVALID_RETRY_COUNTER 0xFF
> #define INVALID_DCMF_VERSION 0xFF
> #define INVALID_DCMF_STATUS 0xFFFFFFFF
> +#define INVALID_SPT_ADDRESS 0x0
> +
> +#define RSU_GET_SPT_CMD 0x5A
> +#define RSU_GET_SPT_RESP_LEN (4 * sizeof(unsigned int))
>
> typedef void (*rsu_callback)(struct stratix10_svc_client *client,
> struct stratix10_svc_cb_data *data); @@ -59,6
> +63,9 @@ typedef void (*rsu_callback)(struct stratix10_svc_client *client,
> * @dcmf_status.dcmf3: dcmf3 status
> * @retry_counter: the current image's retry counter
> * @max_retry: the preset max retry value
> + * @spt0_address: address of spt0
> + * @spt1_address: address of spt1
> + * @get_spt_response_buf: response from sdm for get_spt command
> */
> struct stratix10_rsu_priv {
> struct stratix10_svc_chan *chan;
> @@ -90,6 +97,11 @@ struct stratix10_rsu_priv {
>
> unsigned int retry_counter;
> unsigned int max_retry;
> +
> + unsigned long spt0_address;
> + unsigned long spt1_address;
> +
> + unsigned int *get_spt_response_buf;
> };
>
> /**
> @@ -259,6 +271,36 @@ static void rsu_dcmf_status_callback(struct
> stratix10_svc_client *client,
> complete(&priv->completion);
> }
>
> +static void rsu_get_spt_callback(struct stratix10_svc_client *client,
> + struct stratix10_svc_cb_data *data) {
> + struct stratix10_rsu_priv *priv = client->priv;
> + unsigned long *mbox_err = (unsigned long *)data->kaddr1;
> + unsigned long *resp_len = (unsigned long *)data->kaddr2;
> +
> + if ((data->status != BIT(SVC_STATUS_OK)) || (*mbox_err) ||
> + (*resp_len != RSU_GET_SPT_RESP_LEN))
> + goto error;
> +
> + priv->spt0_address = priv->get_spt_response_buf[0];
> + priv->spt0_address <<= 32;
> + priv->spt0_address |= priv->get_spt_response_buf[1];
> +
> + priv->spt1_address = priv->get_spt_response_buf[2];
> + priv->spt1_address <<= 32;
> + priv->spt1_address |= priv->get_spt_response_buf[3];
> +
> + goto complete;
> +
> +error:
> + dev_err(client->dev, "failed to get SPTs\n");
> +
> +complete:
> + stratix10_svc_free_memory(priv->chan, priv-
> >get_spt_response_buf);
> + priv->get_spt_response_buf = NULL;
> + complete(&priv->completion);
> +}
> +
> /**
> * rsu_send_msg() - send a message to Intel service layer
> * @priv: pointer to rsu private data
> @@ -288,6 +330,14 @@ static int rsu_send_msg(struct stratix10_rsu_priv
> *priv,
> if (arg)
> msg.arg[0] = arg;
>
> + if (command == COMMAND_MBOX_SEND_CMD) {
> + msg.arg[1] = 0;
> + msg.payload = NULL;
> + msg.payload_length = 0;
> + msg.payload_output = priv->get_spt_response_buf;
> + msg.payload_length_output = RSU_GET_SPT_RESP_LEN;
> + }
> +
> ret = stratix10_svc_send(priv->chan, &msg);
> if (ret < 0)
> goto status_done;
> @@ -572,6 +622,34 @@ static ssize_t notify_store(struct device *dev,
> return count;
> }
>
> +static ssize_t spt0_address_show(struct device *dev,
> + struct device_attribute *attr, char *buf) {
> + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
> +
> + if (!priv)
> + return -ENODEV;
> +
> + if (priv->spt0_address == INVALID_SPT_ADDRESS)
> + return -EIO;
> +
> + return scnprintf(buf, PAGE_SIZE, "0x%08lx\n", priv->spt0_address); }
> +
> +static ssize_t spt1_address_show(struct device *dev,
> + struct device_attribute *attr, char *buf) {
> + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
> +
> + if (!priv)
> + return -ENODEV;
> +
> + if (priv->spt1_address == INVALID_SPT_ADDRESS)
> + return -EIO;
> +
> + return scnprintf(buf, PAGE_SIZE, "0x%08lx\n", priv->spt1_address); }
> +
> static DEVICE_ATTR_RO(current_image);
> static DEVICE_ATTR_RO(fail_image);
> static DEVICE_ATTR_RO(state);
> @@ -590,6 +668,8 @@ static DEVICE_ATTR_RO(dcmf2_status); static
> DEVICE_ATTR_RO(dcmf3_status); static DEVICE_ATTR_WO(reboot_image);
> static DEVICE_ATTR_WO(notify);
> +static DEVICE_ATTR_RO(spt0_address);
> +static DEVICE_ATTR_RO(spt1_address);
>
> static struct attribute *rsu_attrs[] = {
> &dev_attr_current_image.attr,
> @@ -610,6 +690,8 @@ static struct attribute *rsu_attrs[] = {
> &dev_attr_dcmf3_status.attr,
> &dev_attr_reboot_image.attr,
> &dev_attr_notify.attr,
> + &dev_attr_spt0_address.attr,
> + &dev_attr_spt1_address.attr,
> NULL
> };
>
> @@ -639,11 +721,13 @@ static int stratix10_rsu_probe(struct
> platform_device *pdev)
> priv->dcmf_version.dcmf1 = INVALID_DCMF_VERSION;
> priv->dcmf_version.dcmf2 = INVALID_DCMF_VERSION;
> priv->dcmf_version.dcmf3 = INVALID_DCMF_VERSION;
> - priv->max_retry = INVALID_RETRY_COUNTER;
> priv->dcmf_status.dcmf0 = INVALID_DCMF_STATUS;
> priv->dcmf_status.dcmf1 = INVALID_DCMF_STATUS;
> priv->dcmf_status.dcmf2 = INVALID_DCMF_STATUS;
> priv->dcmf_status.dcmf3 = INVALID_DCMF_STATUS;
> + priv->max_retry = INVALID_RETRY_COUNTER;
> + priv->spt0_address = INVALID_SPT_ADDRESS;
> + priv->spt1_address = INVALID_SPT_ADDRESS;
>
> mutex_init(&priv->lock);
> priv->chan = stratix10_svc_request_channel_byname(&priv->client,
> @@ -693,6 +777,20 @@ static int stratix10_rsu_probe(struct platform_device
> *pdev)
> stratix10_svc_free_channel(priv->chan);
> }
>
> + priv->get_spt_response_buf =
> + stratix10_svc_allocate_memory(priv->chan,
> RSU_GET_SPT_RESP_LEN);
> +
> + if (IS_ERR(priv->get_spt_response_buf)) {
> + dev_err(dev, "failed to allocate get spt buffer\n");
> + } else {
> + ret = rsu_send_msg(priv, COMMAND_MBOX_SEND_CMD,
> + RSU_GET_SPT_CMD, rsu_get_spt_callback);
> + if (ret) {
> + dev_err(dev, "Error, getting SPT table %i\n", ret);
> + stratix10_svc_free_channel(priv->chan);
> + }
> + }
> +
> return ret;
> }
>
> --
> 2.25.1
Powered by blists - more mailing lists