linux-kernel - Re: [PATCH 2/2] dt-bindings: hwmon: add renesas,isl28022

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4105d77e-e011-8df7-35bf-bbfca0b640da@roeck-us.net>
Date:   Wed, 26 Jul 2023 11:19:12 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Carsten Spieß <mail@...sten-spiess.de>,
        Jean Delvare <jdelvare@...e.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Magnus Damm <magnus.damm@...il.com>
Cc:     linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org
Subject: Re: [PATCH 2/2] dt-bindings: hwmon: add renesas,isl28022

On 7/26/23 09:14, Krzysztof Kozlowski wrote:
> On 26/07/2023 17:22, Carsten Spieß wrote:
>> Add dt-bindings for Renesase ISL28022 power monitor.
>>
>> Signed-off-by: Carsten Spieß <mail@...sten-spiess.de>
>> ---
> 
> Thank you for your patch. There is something to discuss/improve.
> 
> 
>>   .../bindings/hwmon/renesas,isl28022.yaml      | 67 +++++++++++++++++++
>>   MAINTAINERS                                   |  1 +
>>   2 files changed, 68 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>> new file mode 100644
>> index 000000000000..5ecf892db269
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
>> @@ -0,0 +1,67 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +
> 
> No blank line.
> 
>> +$id: http://devicetree.org/schemas/hwmon/renesas,isl28022.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Renesas ISL28022 power monitor
>> +
>> +maintainers:
>> +  - Carsten Spieß <mail@...sten-spiess.de>
>> +
>> +description: |
>> +  The ISL28022 is a power monitor with I2C interface. The device monitors
>> +  voltage, current via shunt resistor and calculated power.
>> +
>> +  Datasheets:
>> +    https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf
>> +
>> +Required properties:
>> +  compatible:
>> +    enum:
>> +      - renesas,isl28022
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +Optional properties:
> 
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
> 
> These are "properties"
> 
>> +  shunt-resistor-micro-ohms:
>> +    description:
>> +      Shunt resistor value in micro-Ohm
>> +      defaults to <0> when not set
>> +      monitoring of current and power not supported when <0>
>> +
>> +  shunt-gain:
> 
> 1. Missing vendor prefix (does not look like generic property)
> 2. -microvolt
> 
>> +    description:
>> +      Shunt gain to scale maximal shunt voltage to
>> +      40mV, 80mV, 160mV, 320mV
>> +      defaults to <8> (320mV) when not set
> 
> And then enum is for 40, 80, 160 and 320.
> 
>> +    enum: [1, 2, 4, 8]
>> +
>> +  average:
>> +    description: |
>> +      Number of samples to be used to report voltage, current and power values.
>> +      defaults to <0> when not set
>> +    enum: [0, 1, 2, 4, 8, 16, 32, 64, 128]
> 
> I am sure hwmon has some property for this. Are you sure it is called
> "average"?
> 

Something with samples. adi,power-sample-average is similar. Others
use average-samples, qcom,avg-samples, touchscreen-average-samples.

Guenter

>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
> 
> 
> Best regards,
> Krzysztof
>