lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230731165726.7940-5-rf@opensource.cirrus.com>
Date:   Mon, 31 Jul 2023 17:57:21 +0100
From:   Richard Fitzgerald <rf@...nsource.cirrus.com>
To:     <tiwai@...e.com>
CC:     <perex@...ex.cz>, <alsa-devel@...a-project.org>,
        <linux-kernel@...r.kernel.org>, <patches@...nsource.cirrus.com>,
        Richard Fitzgerald <rf@...nsource.cirrus.com>
Subject: [PATCH 4/9] ALSA: hda/cs35l56: Always power-up and start cs_dsp

Always call cs_dsp_power_up() and cs_dsp_run() in
cs35l56_hda_fw_load() even if there aren't any firmware files
to download. Also, if there aren't any firmware files to
download there is no need to do cs35l56_firmware_shutdown() and
cs35l56_system_reset().

If there aren't any firmware files there's no need to write
anything to the CS35L56 registers to make it work - it will
already be running the ROM firmware. So it's not strictly
necessary to start cs_dsp.

But it's perfectly ok to call cs_dsp_power_up() and
cs_dsp_run() without downloading any firmware. This avoids
having to support a state where audio is playing but cs_dsp
is not running.

Signed-off-by: Richard Fitzgerald <rf@...nsource.cirrus.com>
---
 sound/pci/hda/cs35l56_hda.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c
index b6b8cb21da75..2870f82bfa45 100644
--- a/sound/pci/hda/cs35l56_hda.c
+++ b/sound/pci/hda/cs35l56_hda.c
@@ -536,10 +536,6 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 	cs35l56_hda_request_firmware_files(cs35l56, &wmfw_firmware, &wmfw_filename,
 					   &coeff_firmware, &coeff_filename);
 
-	/* Nothing to do - no firmware files were found to download */
-	if (!wmfw_filename && !coeff_filename)
-		return 0;
-
 	mutex_lock(&cs35l56->base.irq_lock);
 	pm_runtime_get_sync(cs35l56->base.dev);
 
@@ -549,7 +545,7 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 	 * shutdown the firmware to apply them and can use the lower cost
 	 * reinit sequence instead.
 	 */
-	if (!cs35l56->base.secured) {
+	if (!cs35l56->base.secured && (wmfw_firmware || coeff_firmware)) {
 		ret = cs35l56_firmware_shutdown(&cs35l56->base);
 		if (ret)
 			goto err;
@@ -572,8 +568,8 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 		ret = cs35l56_mbox_send(&cs35l56->base, CS35L56_MBOX_CMD_AUDIO_REINIT);
 		if (ret)
 			goto err;
-	} else {
-		/* Reset the device and wait for it to boot */
+	} else if (wmfw_firmware || coeff_firmware) {
+		/* If we downloaded firmware, reset the device and wait for it to boot */
 		cs35l56_system_reset(&cs35l56->base, false);
 		regcache_mark_dirty(cs35l56->base.regmap);
 		ret = cs35l56_wait_for_firmware_boot(&cs35l56->base);
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ