linux-kernel - Re: [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 31 Jul 2023 10:46:42 +0200
From:   Neil Armstrong <neil.armstrong@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Kevin Hilman <khilman@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: switch to
 enable-gpios

On 25/07/2023 16:27, Krzysztof Kozlowski wrote:
> The recommended name for enable GPIOs property in regulator-gpio is
> enable-gpios.  This is also required by bindings:
> 
>    meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> index 97e522921b06..86adc1423385 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> @@ -56,7 +56,7 @@ vddio_c: regulator-vddio-c {
>   		regulator-min-microvolt = <1800000>;
>   		regulator-max-microvolt = <3300000>;
>   
> -		enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
> +		enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
>   		enable-active-high;
>   		regulator-always-on;
>   

Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>