| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e1e9a9c1-db6f-c2f6-1ac0-fd368f79aec6@canonical.com>
Date: Tue, 1 Aug 2023 17:23:05 +0200
From: Heinrich Schuchardt <heinrich.schuchardt@...onical.com>
To: Masahisa Kojima <masahisa.kojima@...aro.org>,
Ard Biesheuvel <ardb@...nel.org>,
Jens Wiklander <jens.wiklander@...aro.org>,
Jan Kiszka <jan.kiszka@...mens.com>,
Sumit Garg <sumit.garg@...aro.org>,
linux-kernel@...r.kernel.org, op-tee@...ts.trustedfirmware.org
Cc: Ilias Apalodimas <ilias.apalodimas@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
linux-efi@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7 3/5] efi: Add tee-based EFI variable driver
On 31.07.23 08:50, Masahisa Kojima wrote:
> When the flash is not owned by the non-secure world, accessing the EFI
> variables is straightforward and done via EFI Runtime Variable Services.
> In this case, critical variables for system integrity and security
> are normally stored in the dedicated secure storage and only accessible
> from the secure world.
>
> On the other hand, the small embedded devices don't have the special
> dedicated secure storage. The eMMC device with an RPMB partition is
> becoming more common, we can use an RPMB partition to store the
> EFI Variables.
>
> The eMMC device is typically owned by the non-secure world(linux in
> this case). There is an existing solution utilizing eMMC RPMB partition
> for EFI Variables, it is implemented by interacting with
> TEE(OP-TEE in this case), StandaloneMM(as EFI Variable Service Pseudo TA),
> eMMC driver and tee-supplicant. The last piece is the tee-based
> variable access driver to interact with TEE and StandaloneMM.
>
> So let's add the kernel functions needed.
>
> This feature is implemented as a kernel module.
> StMM PTA has TA_FLAG_DEVICE_ENUM_SUPP flag when registered to OP-TEE
> so that this tee_stmm_efi module is probed after tee-supplicant starts,
> since "SetVariable" EFI Runtime Variable Service requires to
> interact with tee-supplicant.
>
> Acked-by: Sumit Garg <sumit.garg@...aro.org>
> Co-developed-by: Ilias Apalodimas <ilias.apalodimas@...aro.org>
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@...aro.org>
> Signed-off-by: Masahisa Kojima <masahisa.kojima@...aro.org>
> ---
> drivers/firmware/efi/Kconfig | 15 +
> drivers/firmware/efi/Makefile | 1 +
> drivers/firmware/efi/stmm/mm_communication.h | 236 +++++++
> drivers/firmware/efi/stmm/tee_stmm_efi.c | 638 +++++++++++++++++++
> 4 files changed, 890 insertions(+)
> create mode 100644 drivers/firmware/efi/stmm/mm_communication.h
> create mode 100644 drivers/firmware/efi/stmm/tee_stmm_efi.c
>
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 043ca31c114e..aa38089d1e4a 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -287,3 +287,18 @@ config UEFI_CPER_X86
> bool
> depends on UEFI_CPER && X86
> default y
> +
> +config TEE_STMM_EFI
> + tristate "TEE based EFI runtime variable service driver"
> + depends on EFI && OPTEE && !EFI_VARS_PSTORE
> + help
> + Select this config option if TEE is compiled to include StandAloneMM
> + as a separate secure partition it has the ability to check and store
> + EFI variables on an RPMB or any other non-volatile medium used by
> + StandAloneMM.
> +
> + Enabling this will change the EFI runtime services from the firmware
> + provided functions to TEE calls.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called tee_stmm_efi.
> diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
> index b51f2a4c821e..2ca8ee6ab490 100644
> --- a/drivers/firmware/efi/Makefile
> +++ b/drivers/firmware/efi/Makefile
> @@ -41,3 +41,4 @@ obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
> obj-$(CONFIG_EFI_EARLYCON) += earlycon.o
> obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
> obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
> +obj-$(CONFIG_TEE_STMM_EFI) += stmm/tee_stmm_efi.o
> diff --git a/drivers/firmware/efi/stmm/mm_communication.h b/drivers/firmware/efi/stmm/mm_communication.h
> new file mode 100644
> index 000000000000..52a1f32cd1eb
> --- /dev/null
> +++ b/drivers/firmware/efi/stmm/mm_communication.h
> @@ -0,0 +1,236 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Headers for EFI variable service via StandAloneMM, EDK2 application running
> + * in OP-TEE. Most of the structs and defines resemble the EDK2 naming.
> + *
> + * Copyright (c) 2017, Intel Corporation. All rights reserved.
> + * Copyright (C) 2020 Linaro Ltd.
> + */
> +
> +#ifndef _MM_COMMUNICATION_H_
> +#define _MM_COMMUNICATION_H_
> +
> +/*
> + * Interface to the pseudo Trusted Application (TA), which provides a
> + * communication channel with the Standalone MM (Management Mode)
> + * Secure Partition running at Secure-EL0
> + */
> +
> +#define PTA_STMM_CMD_COMMUNICATE 0
> +
> +/*
> + * Defined in OP-TEE, this UUID is used to identify the pseudo-TA.
> + * OP-TEE is using big endian GUIDs while UEFI uses little endian ones
> + */
> +#define PTA_STMM_UUID \
> + UUID_INIT(0xed32d533, 0x99e6, 0x4209, \
> + 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7)
> +
> +#define EFI_MM_VARIABLE_GUID \
> + EFI_GUID(0xed32d533, 0x99e6, 0x4209, \
> + 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7)
> +
> +/**
> + * struct efi_mm_communicate_header - Header used for SMM variable communication
> +
> + * @header_guid: header use for disambiguation of content
> + * @message_len: length of the message. Does not include the size of the
> + * header
> + * @data: payload of the message
> + *
> + * Defined in the PI spec as EFI_MM_COMMUNICATE_HEADER.
> + * To avoid confusion in interpreting frames, the communication buffer should
> + * always begin with efi_mm_communicate_header.
> + */
> +struct efi_mm_communicate_header {
> + efi_guid_t header_guid;
> + size_t message_len;
> + u8 data[];
> +} __packed;
> +
> +#define MM_COMMUNICATE_HEADER_SIZE \
> + (sizeof(struct efi_mm_communicate_header))
> +
> +/* SPM return error codes */
> +#define ARM_SVC_SPM_RET_SUCCESS 0
> +#define ARM_SVC_SPM_RET_NOT_SUPPORTED -1
> +#define ARM_SVC_SPM_RET_INVALID_PARAMS -2
> +#define ARM_SVC_SPM_RET_DENIED -3
> +#define ARM_SVC_SPM_RET_NO_MEMORY -5
> +
> +#define SMM_VARIABLE_FUNCTION_GET_VARIABLE 1
> +/*
> + * The payload for this function is
> + * SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME.
> + */
> +#define SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME 2
> +/*
> + * The payload for this function is SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE.
> + */
> +#define SMM_VARIABLE_FUNCTION_SET_VARIABLE 3
> +/*
> + * The payload for this function is
> + * SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO.
> + */
> +#define SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO 4
> +/*
> + * It is a notify event, no extra payload for this function.
> + */
> +#define SMM_VARIABLE_FUNCTION_READY_TO_BOOT 5
> +/*
> + * It is a notify event, no extra payload for this function.
> + */
> +#define SMM_VARIABLE_FUNCTION_EXIT_BOOT_SERVICE 6
> +/*
> + * The payload for this function is VARIABLE_INFO_ENTRY.
> + * The GUID in EFI_SMM_COMMUNICATE_HEADER is gEfiSmmVariableProtocolGuid.
> + */
> +#define SMM_VARIABLE_FUNCTION_GET_STATISTICS 7
> +/*
> + * The payload for this function is SMM_VARIABLE_COMMUNICATE_LOCK_VARIABLE
> + */
> +#define SMM_VARIABLE_FUNCTION_LOCK_VARIABLE 8
> +
> +#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_SET 9
> +
> +#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET 10
> +
> +#define SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE 11
> +/*
> + * The payload for this function is
> + * SMM_VARIABLE_COMMUNICATE_RUNTIME_VARIABLE_CACHE_CONTEXT
> + */
> +#define SMM_VARIABLE_FUNCTION_INIT_RUNTIME_VARIABLE_CACHE_CONTEXT 12
> +
> +#define SMM_VARIABLE_FUNCTION_SYNC_RUNTIME_CACHE 13
> +/*
> + * The payload for this function is
> + * SMM_VARIABLE_COMMUNICATE_GET_RUNTIME_CACHE_INFO
> + */
> +#define SMM_VARIABLE_FUNCTION_GET_RUNTIME_CACHE_INFO 14
> +
> +/**
> + * struct smm_variable_communicate_header - Used for SMM variable communication
> +
> + * @function: function to call in Smm.
> + * @ret_status: return status
> + * @data: payload
> + */
> +struct smm_variable_communicate_header {
> + size_t function;
> + efi_status_t ret_status;
> + u8 data[];
> +};
> +
> +#define MM_VARIABLE_COMMUNICATE_SIZE \
> + (sizeof(struct smm_variable_communicate_header))
> +
> +/**
> + * struct smm_variable_access - Used to communicate with StMM by
> + * SetVariable and GetVariable.
> +
> + * @guid: vendor GUID
> + * @data_size: size of EFI variable data
> + * @name_size: size of EFI name
> + * @attr: attributes
> + * @name: variable name
> + *
> + */
> +struct smm_variable_access {
> + efi_guid_t guid;
> + size_t data_size;
> + size_t name_size;
> + u32 attr;
> + u16 name[];
> +};
> +
> +#define MM_VARIABLE_ACCESS_HEADER_SIZE \
> + (sizeof(struct smm_variable_access))
> +/**
> + * struct smm_variable_payload_size - Used to get the max allowed
> + * payload used in StMM.
> + *
> + * @size: size to fill in
> + *
> + */
> +struct smm_variable_payload_size {
> + size_t size;
> +};
> +
> +/**
> + * struct smm_variable_getnext - Used to communicate with StMM for
> + * GetNextVariableName.
> + *
> + * @guid: vendor GUID
> + * @name_size: size of the name of the variable
> + * @name: variable name
> + *
> + */
> +struct smm_variable_getnext {
> + efi_guid_t guid;
> + size_t name_size;
> + u16 name[];
> +};
> +
> +#define MM_VARIABLE_GET_NEXT_HEADER_SIZE \
> + (sizeof(struct smm_variable_getnext))
> +
> +/**
> + * struct smm_variable_query_info - Used to communicate with StMM for
> + * QueryVariableInfo.
> + *
> + * @max_variable_storage: max available storage
> + * @remaining_variable_storage: remaining available storage
> + * @max_variable_size: max variable supported size
> + * @attr: attributes to query storage for
> + *
> + */
> +struct smm_variable_query_info {
> + u64 max_variable_storage;
> + u64 remaining_variable_storage;
> + u64 max_variable_size;
> + u32 attr;
> +};
> +
> +#define VAR_CHECK_VARIABLE_PROPERTY_REVISION 0x0001
> +#define VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY BIT(0)
> +/**
> + * struct var_check_property - Used to store variable properties in StMM
> + *
> + * @revision: magic revision number for variable property checking
> + * @property: properties mask for the variable used in StMM.
> + * Currently RO flag is supported
> + * @attributes: variable attributes used in StMM checking when properties
> + * for a variable are enabled
> + * @minsize: minimum allowed size for variable payload checked against
> + * smm_variable_access->datasize in StMM
> + * @maxsize: maximum allowed size for variable payload checked against
> + * smm_variable_access->datasize in StMM
> + *
> + */
> +struct var_check_property {
> + u16 revision;
> + u16 property;
> + u32 attributes;
> + size_t minsize;
> + size_t maxsize;
> +};
> +
> +/**
> + * struct smm_variable_var_check_property - Used to communicate variable
> + * properties with StMM
> + *
> + * @guid: vendor GUID
> + * @name_size: size of EFI name
> + * @property: variable properties struct
> + * @name: variable name
> + *
> + */
> +struct smm_variable_var_check_property {
> + efi_guid_t guid;
> + size_t name_size;
> + struct var_check_property property;
> + u16 name[];
> +};
> +
> +#endif /* _MM_COMMUNICATION_H_ */
> diff --git a/drivers/firmware/efi/stmm/tee_stmm_efi.c b/drivers/firmware/efi/stmm/tee_stmm_efi.c
> new file mode 100644
> index 000000000000..f6623171ae04
> --- /dev/null
> +++ b/drivers/firmware/efi/stmm/tee_stmm_efi.c
> @@ -0,0 +1,638 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * EFI variable service via TEE
> + *
> + * Copyright (C) 2022 Linaro
> + */
> +
> +#include <linux/efi.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/tee.h>
> +#include <linux/tee_drv.h>
> +#include <linux/ucs2_string.h>
> +#include "mm_communication.h"
> +
> +static struct efivars tee_efivars;
> +static struct efivar_operations tee_efivar_ops;
> +
> +static size_t max_buffer_size; /* comm + var + func + data */
> +static size_t max_payload_size; /* func + data */
> +
> +struct tee_stmm_efi_private {
> + struct tee_context *ctx;
> + u32 session;
> + struct device *dev;
> +};
> +
> +static struct tee_stmm_efi_private pvt_data;
> +
> +/* UUID of the stmm PTA */
> +static const struct tee_client_device_id tee_stmm_efi_id_table[] = {
> + {PTA_STMM_UUID},
> + {}
> +};
> +
> +static int tee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> + /* currently only OP-TEE is supported as a communication path */
> + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> + return 1;
> + else
> + return 0;
> +}
> +
> +/**
> + * tee_mm_communicate() - Pass a buffer to StandaloneMM running in TEE
> + *
> + * @comm_buf: locally allocated communication buffer
> + * @dsize: buffer size
> + * Return: status code
> + */
> +static efi_status_t tee_mm_communicate(void *comm_buf, size_t dsize)
> +{
> + size_t buf_size;
> + efi_status_t ret;
> + struct efi_mm_communicate_header *mm_hdr;
> + struct tee_ioctl_invoke_arg arg;
> + struct tee_param param[4];
> + struct tee_shm *shm = NULL;
> + int rc;
> +
> + if (!comm_buf)
> + return EFI_INVALID_PARAMETER;
> +
> + mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
> + buf_size = mm_hdr->message_len + sizeof(efi_guid_t) + sizeof(size_t);
> +
> + if (dsize != buf_size)
> + return EFI_INVALID_PARAMETER;
> +
> + shm = tee_shm_register_kernel_buf(pvt_data.ctx, comm_buf, buf_size);
> + if (IS_ERR(shm)) {
> + dev_err(pvt_data.dev, "Unable to register shared memory\n");
> + return EFI_UNSUPPORTED;
> + }
> +
> + memset(&arg, 0, sizeof(arg));
> + arg.func = PTA_STMM_CMD_COMMUNICATE;
> + arg.session = pvt_data.session;
> + arg.num_params = 4;
> +
> + memset(param, 0, sizeof(param));
> + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> + param[0].u.memref.size = buf_size;
> + param[0].u.memref.shm = shm;
> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
> + param[3].attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
> +
> + rc = tee_client_invoke_func(pvt_data.ctx, &arg, param);
> + tee_shm_free(shm);
> +
> + if (rc < 0 || arg.ret != 0) {
> + dev_err(pvt_data.dev,
> + "PTA_STMM_CMD_COMMUNICATE invoke error: 0x%x\n", arg.ret);
> + return EFI_DEVICE_ERROR;
> + }
> +
> + switch (param[1].u.value.a) {
> + case ARM_SVC_SPM_RET_SUCCESS:
> + ret = EFI_SUCCESS;
> + break;
> +
> + case ARM_SVC_SPM_RET_INVALID_PARAMS:
> + ret = EFI_INVALID_PARAMETER;
> + break;
> +
> + case ARM_SVC_SPM_RET_DENIED:
> + ret = EFI_ACCESS_DENIED;
> + break;
> +
> + case ARM_SVC_SPM_RET_NO_MEMORY:
> + ret = EFI_OUT_OF_RESOURCES;
> + break;
> +
> + default:
> + ret = EFI_ACCESS_DENIED;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * mm_communicate() - Adjust the communication buffer to StandAlonneMM and send
> + * it to TEE
> + *
> + * @comm_buf: locally allocated communication buffer, buffer should
> + * be enough big to have some headers and payload
> + * @payload_size: payload size
> + * Return: status code
> + */
> +static efi_status_t mm_communicate(u8 *comm_buf, size_t payload_size)
> +{
> + size_t dsize;
> + efi_status_t ret;
> + struct efi_mm_communicate_header *mm_hdr;
> + struct smm_variable_communicate_header *var_hdr;
> +
> + dsize = payload_size + MM_COMMUNICATE_HEADER_SIZE +
> + MM_VARIABLE_COMMUNICATE_SIZE;
> + mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
> + var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data;
> +
> + ret = tee_mm_communicate(comm_buf, dsize);
> + if (ret != EFI_SUCCESS) {
> + dev_err(pvt_data.dev, "%s failed!\n", __func__);
> + return ret;
> + }
> +
> + return var_hdr->ret_status;
> +}
> +
> +/**
> + * setup_mm_hdr() - Allocate a buffer for StandAloneMM and initialize the
> + * header data.
> + *
> + * @dptr: pointer address to store allocated buffer
> + * @payload_size: payload size
> + * @func: standAloneMM function number
> + * @ret: EFI return code
> + * Return: pointer to corresponding StandAloneMM function buffer or NULL
> + */
> +static void *setup_mm_hdr(u8 **dptr, size_t payload_size, size_t func,
> + efi_status_t *ret)
> +{
> + const efi_guid_t mm_var_guid = EFI_MM_VARIABLE_GUID;
> + struct efi_mm_communicate_header *mm_hdr;
> + struct smm_variable_communicate_header *var_hdr;
> + u8 *comm_buf;
> +
> + /* In the init function we initialize max_buffer_size with
> + * get_max_payload(). So skip the test if max_buffer_size is initialized
> + * StandAloneMM will perform similar checks and drop the buffer if it's
> + * too long
> + */
> + if (max_buffer_size &&
> + max_buffer_size < (MM_COMMUNICATE_HEADER_SIZE +
> + MM_VARIABLE_COMMUNICATE_SIZE + payload_size)) {
> + *ret = EFI_INVALID_PARAMETER;
> + return NULL;
> + }
> +
> + comm_buf = kzalloc(MM_COMMUNICATE_HEADER_SIZE +
> + MM_VARIABLE_COMMUNICATE_SIZE + payload_size,
> + GFP_KERNEL);
> + if (!comm_buf) {
> + *ret = EFI_OUT_OF_RESOURCES;
> + return NULL;
> + }
> +
> + mm_hdr = (struct efi_mm_communicate_header *)comm_buf;
> + memcpy(&mm_hdr->header_guid, &mm_var_guid, sizeof(mm_hdr->header_guid));
> + mm_hdr->message_len = MM_VARIABLE_COMMUNICATE_SIZE + payload_size;
> +
> + var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data;
> + var_hdr->function = func;
> + if (dptr)
> + *dptr = comm_buf;
> + *ret = EFI_SUCCESS;
> +
> + return var_hdr->data;
> +}
> +
> +/**
> + * get_max_payload() - Get variable payload size from StandAloneMM.
> + *
> + * @size: size of the variable in storage
> + * Return: status code
> + */
> +static efi_status_t get_max_payload(size_t *size)
> +{
> + struct smm_variable_payload_size *var_payload = NULL;
> + size_t payload_size;
> + u8 *comm_buf = NULL;
> + efi_status_t ret;
> +
> + if (!size) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + payload_size = sizeof(*var_payload);
> + var_payload = setup_mm_hdr(&comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE,
> + &ret);
> + if (!comm_buf)
> + goto out;
> +
> + ret = mm_communicate(comm_buf, payload_size);
> + if (ret != EFI_SUCCESS)
> + goto out;
> +
> + /* Make sure the buffer is big enough for storing variables */
> + if (var_payload->size < MM_VARIABLE_ACCESS_HEADER_SIZE + 0x20) {
> + ret = EFI_DEVICE_ERROR;
> + goto out;
> + }
> + *size = var_payload->size;
> + /*
> + * There seems to be a bug in EDK2 miscalculating the boundaries and
> + * size checks, so deduct 2 more bytes to fulfill this requirement. Fix
> + * it up here to ensure backwards compatibility with older versions
> + * (cf. StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/EventHandle.c.
> + * sizeof (EFI_MM_COMMUNICATE_HEADER) instead the size minus the
> + * flexible array member).
> + *
> + * size is guaranteed to be > 2 due to checks on the beginning.
> + */
> + *size -= 2;
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static efi_status_t get_property_int(u16 *name, size_t name_size,
> + const efi_guid_t *vendor,
> + struct var_check_property *var_property)
> +{
> + struct smm_variable_var_check_property *smm_property;
> + size_t payload_size;
> + u8 *comm_buf = NULL;
> + efi_status_t ret;
> +
> + memset(var_property, 0, sizeof(*var_property));
> + payload_size = sizeof(*smm_property) + name_size;
> + if (payload_size > max_payload_size) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> + smm_property = setup_mm_hdr(
> + &comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET, &ret);
> + if (!comm_buf)
> + goto out;
> +
> + memcpy(&smm_property->guid, vendor, sizeof(smm_property->guid));
> + smm_property->name_size = name_size;
> + memcpy(smm_property->name, name, name_size);
> +
> + ret = mm_communicate(comm_buf, payload_size);
> + /*
> + * Currently only R/O property is supported in StMM.
> + * Variables that are not set to R/O will not set the property in StMM
> + * and the call will return EFI_NOT_FOUND. We are setting the
> + * properties to 0x0 so checking against that is enough for the
> + * EFI_NOT_FOUND case.
> + */
> + if (ret == EFI_NOT_FOUND)
> + ret = EFI_SUCCESS;
> + if (ret != EFI_SUCCESS)
> + goto out;
> + memcpy(var_property, &smm_property->property, sizeof(*var_property));
> +
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static efi_status_t tee_get_variable(u16 *name, efi_guid_t *vendor,
> + u32 *attributes, unsigned long *data_size,
> + void *data)
> +{
> + struct var_check_property var_property;
> + struct smm_variable_access *var_acc;
> + size_t payload_size;
> + size_t name_size;
> + size_t tmp_dsize;
> + u8 *comm_buf = NULL;
> + efi_status_t ret;
> +
> + if (!name || !vendor || !data_size) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
> + if (name_size > max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + /* Trim output buffer size */
> + tmp_dsize = *data_size;
> + if (name_size + tmp_dsize >
> + max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) {
> + tmp_dsize = max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE -
> + name_size;
> + }
> +
> + /* Get communication buffer and initialize header */
> + payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + tmp_dsize;
> + var_acc = setup_mm_hdr(&comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_GET_VARIABLE, &ret);
> + if (!comm_buf)
> + goto out;
> +
> + /* Fill in contents */
> + memcpy(&var_acc->guid, vendor, sizeof(var_acc->guid));
> + var_acc->data_size = tmp_dsize;
> + var_acc->name_size = name_size;
> + var_acc->attr = attributes ? *attributes : 0;
> + memcpy(var_acc->name, name, name_size);
> +
> + /* Communicate */
> + ret = mm_communicate(comm_buf, payload_size);
> + if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL)
> + /* Update with reported data size for trimmed case */
> + *data_size = var_acc->data_size;
> + if (ret != EFI_SUCCESS)
> + goto out;
> +
> + ret = get_property_int(name, name_size, vendor, &var_property);
> + if (ret != EFI_SUCCESS)
> + goto out;
> +
> + if (attributes)
> + *attributes = var_acc->attr;
> +
> + if (data)
> + memcpy(data, (u8 *)var_acc->name + var_acc->name_size,
> + var_acc->data_size);
> + else
> + ret = EFI_INVALID_PARAMETER;
> +
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static efi_status_t tee_get_next_variable(unsigned long *name_size,
> + efi_char16_t *name, efi_guid_t *guid)
> +{
> + struct smm_variable_getnext *var_getnext;
> + size_t payload_size;
> + size_t out_name_size;
> + size_t in_name_size;
> + u8 *comm_buf = NULL;
> + efi_status_t ret;
> +
> + if (!name_size || !name || !guid) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + out_name_size = *name_size;
> + in_name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
> +
> + if (out_name_size < in_name_size) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + if (in_name_size >
> + max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + /* Trim output buffer size */
> + if (out_name_size > max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE)
> + out_name_size =
> + max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE;
> +
> + payload_size = MM_VARIABLE_GET_NEXT_HEADER_SIZE + out_name_size;
> + var_getnext = setup_mm_hdr(&comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME,
> + &ret);
> + if (!comm_buf)
> + goto out;
> +
> + /* Fill in contents */
> + memcpy(&var_getnext->guid, guid, sizeof(var_getnext->guid));
> + var_getnext->name_size = out_name_size;
> + memcpy(var_getnext->name, name, in_name_size);
> + memset((u8 *)var_getnext->name + in_name_size, 0x0,
> + out_name_size - in_name_size);
> +
> + /* Communicate */
> + ret = mm_communicate(comm_buf, payload_size);
> + if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) {
> + /* Update with reported data size for trimmed case */
> + *name_size = var_getnext->name_size;
> + }
> + if (ret != EFI_SUCCESS)
> + goto out;
> +
> + memcpy(guid, &var_getnext->guid, sizeof(*guid));
> + memcpy(name, var_getnext->name, var_getnext->name_size);
> +
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static efi_status_t tee_set_variable(efi_char16_t *name, efi_guid_t *vendor,
> + u32 attributes, unsigned long data_size,
> + void *data)
> +{
> + efi_status_t ret;
> + struct var_check_property var_property;
> + struct smm_variable_access *var_acc;
> + size_t payload_size;
> + size_t name_size;
> + u8 *comm_buf = NULL;
> +
> + if (!name || name[0] == 0 || !vendor) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> + if (data_size > 0 && !data) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> + /* Check payload size */
> + name_size = (ucs2_strnlen(name, EFI_VAR_NAME_LEN) + 1) * sizeof(u16);
> + payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + data_size;
> + if (payload_size > max_payload_size) {
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> +
> + /*
> + * Allocate the buffer early, before switching to RW (if needed)
> + * so we won't need to account for any failures in reading/setting
> + * the properties, if the allocation fails
> + */
> + var_acc = setup_mm_hdr(&comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_SET_VARIABLE, &ret);
> + if (!comm_buf)
> + goto out;
> +
> + /*
> + * The API has the ability to override RO flags. If no RO check was
> + * requested switch the variable to RW for the duration of this call
> + */
> + ret = get_property_int(name, name_size, vendor, &var_property);
> + if (ret != EFI_SUCCESS) {
> + dev_err(pvt_data.dev, "Getting variable property failed\n");
> + goto out;
> + }
> +
> + if (var_property.property & VAR_CHECK_VARIABLE_PROPERTY_READ_ONLY) {
> + ret = EFI_WRITE_PROTECTED;
> + goto out;
> + }
> +
> + /* Fill in contents */
> + memcpy(&var_acc->guid, vendor, sizeof(var_acc->guid));
> + var_acc->data_size = data_size;
> + var_acc->name_size = name_size;
> + var_acc->attr = attributes;
> + memcpy(var_acc->name, name, name_size);
> + memcpy((u8 *)var_acc->name + name_size, data, data_size);
> +
> +
> + /* Communicate */
> + ret = mm_communicate(comm_buf, payload_size);
> + dev_dbg(pvt_data.dev, "Set Variable %s %d %lx\n", __FILE__, __LINE__, ret);
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static efi_status_t tee_set_variable_nonblocking(efi_char16_t *name,
> + efi_guid_t *vendor,
> + u32 attributes,
> + unsigned long data_size,
> + void *data)
> +{
> + return EFI_UNSUPPORTED;
> +}
> +
> +static efi_status_t tee_query_variable_info(u32 attributes,
> + u64 *max_variable_storage_size,
> + u64 *remain_variable_storage_size,
> + u64 *max_variable_size)
> +{
> + struct smm_variable_query_info *mm_query_info;
> + size_t payload_size;
> + efi_status_t ret;
> + u8 *comm_buf;
> +
> + payload_size = sizeof(*mm_query_info);
> + mm_query_info = setup_mm_hdr(&comm_buf, payload_size,
> + SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO,
> + &ret);
> + if (!comm_buf)
> + goto out;
> +
> + mm_query_info->attr = attributes;
> + ret = mm_communicate(comm_buf, payload_size);
> + if (ret != EFI_SUCCESS)
> + goto out;
> + *max_variable_storage_size = mm_query_info->max_variable_storage;
> + *remain_variable_storage_size =
> + mm_query_info->remaining_variable_storage;
> + *max_variable_size = mm_query_info->max_variable_size;
> +
> +out:
> + kfree(comm_buf);
> + return ret;
> +}
> +
> +static int tee_stmm_efi_probe(struct device *dev)
> +{
> + struct tee_ioctl_open_session_arg sess_arg;
> + efi_status_t ret;
> + int rc;
> +
> + /* Open context with TEE driver */
> + pvt_data.ctx = tee_client_open_context(NULL, tee_ctx_match, NULL, NULL);
> + if (IS_ERR(pvt_data.ctx))
> + return -ENODEV;
> +
> + /* Open session with StMM PTA */
> + memset(&sess_arg, 0, sizeof(sess_arg));
> + export_uuid(sess_arg.uuid, &tee_stmm_efi_id_table[0].uuid);
> + rc = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
> + if ((rc < 0) || (sess_arg.ret != 0)) {
> + dev_err(dev, "tee_client_open_session failed, err: %x\n",
> + sess_arg.ret);
> + rc = -EINVAL;
> + goto out_ctx;
> + }
> + pvt_data.session = sess_arg.session;
> + pvt_data.dev = dev;
> +
> + ret = get_max_payload(&max_payload_size);
> + if (ret != EFI_SUCCESS) {
> + rc = -EIO;
> + goto out_sess;
> + }
> +
> + max_buffer_size = MM_COMMUNICATE_HEADER_SIZE +
> + MM_VARIABLE_COMMUNICATE_SIZE +
> + max_payload_size;
> +
> + tee_efivar_ops.get_variable = tee_get_variable;
> + tee_efivar_ops.get_next_variable = tee_get_next_variable;
> + tee_efivar_ops.set_variable = tee_set_variable;
> + tee_efivar_ops.set_variable_nonblocking = tee_set_variable_nonblocking;
> + tee_efivar_ops.query_variable_store = efi_query_variable_store;
> + tee_efivar_ops.query_variable_info = tee_query_variable_info;
> +
> + efivars_generic_ops_unregister();
> + pr_info("Use tee-based EFI runtime variable services\n");
> + efivars_register(&tee_efivars, &tee_efivar_ops);
> +
> + return 0;
> +
> +out_sess:
> + tee_client_close_session(pvt_data.ctx, pvt_data.session);
> +out_ctx:
> + tee_client_close_context(pvt_data.ctx);
> +
> + return rc;
> +}
> +
> +static int tee_stmm_efi_remove(struct device *dev)
> +{
> + efivars_unregister(&tee_efivars);
> + efivars_generic_ops_register();
> +
> + tee_client_close_session(pvt_data.ctx, pvt_data.session);
> + tee_client_close_context(pvt_data.ctx);
> +
> + return 0;
> +}
> +
> +MODULE_DEVICE_TABLE(tee, tee_stmm_efi_id_table);
> +
> +static struct tee_client_driver tee_stmm_efi_driver = {
> + .id_table = tee_stmm_efi_id_table,
> + .driver = {
> + .name = "tee-stmm-efi",
> + .bus = &tee_bus_type,
> + .probe = tee_stmm_efi_probe,
> + .remove = tee_stmm_efi_remove,
> + },
> +};
> +
> +static int __init tee_stmm_efi_mod_init(void)
> +{
> + return driver_register(&tee_stmm_efi_driver.driver);
Assuming that multiple drivers supplying EFI runtime services may be
available in future, e.g.
* generic, using EFI runtime function supplied by UEFI firmware
* TEE-STMM
* Qualcomm driver as needed for Lenovo X13s
* ubootefi.var file in ESP
further assuming that multiple driver probe functions succeed:
How do you identify which driver to activate?
Best regards
Heinrich
> +}
> +
> +static void __exit tee_stmm_efi_mod_exit(void)
> +{
> + driver_unregister(&tee_stmm_efi_driver.driver);
> +}
> +
> +module_init(tee_stmm_efi_mod_init);
> +module_exit(tee_stmm_efi_mod_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Ilias Apalodimas <ilias.apalodimas@...aro.org>");
> +MODULE_AUTHOR("Masahisa Kojima <masahisa.kojima@...aro.org>");
> +MODULE_DESCRIPTION("TEE based EFI runtime variable service driver");
Powered by blists - more mailing lists