[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230804103859.57458-3-tony@atomide.com>
Date: Fri, 4 Aug 2023 13:38:59 +0300
From: Tony Lindgren <tony@...mide.com>
To: linux-omap@...r.kernel.org
Cc: Dave Gerlach <d-gerlach@...com>, Dhruva Gole <d-gole@...com>,
Faiz Abbas <faiz_abbas@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Keerthy <j-keerthy@...com>, Kevin Hilman <khilman@...libre.com>,
Nishanth Menon <nm@...com>, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 3/3] bus: ti-sysc: Configure uart quirks for k3 SoC
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.
Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
drivers/bus/ti-sysc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1525,6 +1525,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff,
+ SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */
SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
--
2.41.0
Powered by blists - more mailing lists