| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230805-topic-8998_dpu-v1-1-0da18d4a3453@linaro.org>
Date: Sat, 05 Aug 2023 14:25:58 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH] arm64: dts: qcom: msm8998: Add DPU1 nodes
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Add the required nodes to support the display hardware on msm8998.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
[konrad: update the commit msg and AGdR's email, rebase]
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 283 +++++++++++++++++++++++++++++++++-
1 file changed, 279 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index a41a34dbcc3c..e28c5bbc99e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -316,6 +316,25 @@ scm {
};
};
+ dsi_opp_table: opp-table-dsi {
+ compatible = "operating-points-v2";
+
+ opp-131250000 {
+ opp-hz = /bits/ 64 <131250000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-210000000 {
+ opp-hz = /bits/ 64 <210000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-312500000 {
+ opp-hz = /bits/ 64 <312500000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -2727,15 +2746,271 @@ mmcc: clock-controller@...0000 {
"dpvco";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_MMSS_GPLL0_CLK>,
- <0>,
- <0>,
- <0>,
- <0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&mdss_dsi1_phy 0>,
<0>,
<0>,
<0>;
};
+ mdss: display-subsystem@...0000 {
+ compatible = "qcom,msm8998-mdss";
+ reg = <0x0c900000 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ iommus = <&mmss_smmu 0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@...1000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp",
+ "regdma",
+ "vbif",
+ "vbif_nrt";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "mnoc",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-171430000 {
+ opp-hz = /bits/ 64 <171430000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-330000000 {
+ opp-hz = /bits/ 64 <330000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+
+ opp-412500000 {
+ opp-hz = /bits/ 64 <412500000>;
+ required-opps = <&rpmpd_opp_turbo>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@...4000 {
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0c994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_BYTE0_INTF_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+ <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...4400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c994400 0x200>,
+ <0x0c994600 0x280>,
+ <0x0c994a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@...6000 {
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0c996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_BYTE1_INTF_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+ <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@...6400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c996400 0x200>,
+ <0x0c996600 0x280>,
+ <0x0c996a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
mmss_smmu: iommu@...0000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
---
base-commit: bdffb18b5dd8071cd25685b966f380a30b1fadaa
change-id: 20230805-topic-8998_dpu-1fd83d24ea9c
Best regards,
--
Konrad Dybcio <konrad.dybcio@...aro.org>
Powered by blists - more mailing lists