| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230807111855.2614761-4-danishanwar@ti.com>
Date: Mon, 7 Aug 2023 16:48:55 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Nishanth Menon <nm@...com>
CC: Tero Kristo <kristo@...nel.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<danishanwar@...com>, <srk@...com>
Subject: [PATCH RFC 3/3] arm64: dts: ti: am654-base-board: add ICSSG2 Ethernet support
ICSSG2 provides dual Gigabit Ethernet support.
For support SR2.0 ICSSG Ethernet firmware:
- provide different firmware blobs and use TX_PRU.
- IEP0 is used as PTP Hardware Clock and can only be used for one port.
- TX timestamp notification comes via INTC interrupt.
Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 131 ++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 973a89b04a22..ca9402c3d9c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -25,6 +25,8 @@ aliases {
ethernet0 = &cpsw_port1;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
+ ethernet1 = &icssg2_emac0;
+ ethernet2 = &icssg2_emac1;
};
chosen {
@@ -144,6 +146,72 @@ vtt_supply: regulator-3 {
vin-supply = <&vcc3v3_io>;
gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
};
+
+ /* Dual Ethernet application node on PRU-ICSSG2 */
+ icssg2_eth: icssg2-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+ <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg2_mii_g_rt>;
+ ti,mii-rt = <&icssg2_mii_rt>;
+ ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+
+ interrupt-parent = <&icssg2_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+ <&main_udmap 0xc301>, /* egress slice 0 */
+ <&main_udmap 0xc302>, /* egress slice 0 */
+ <&main_udmap 0xc303>, /* egress slice 0 */
+ <&main_udmap 0xc304>, /* egress slice 1 */
+ <&main_udmap 0xc305>, /* egress slice 1 */
+ <&main_udmap 0xc306>, /* egress slice 1 */
+ <&main_udmap 0xc307>, /* egress slice 1 */
+ <&main_udmap 0x4300>, /* ingress slice 0 */
+ <&main_udmap 0x4301>; /* ingress slice 1 */
+
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg2_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg2_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg2_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg2_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
};
&wkup_pmx0 {
@@ -300,6 +368,43 @@ usb1_pins_default: usb1-default-pins {
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
};
+
+ icssg2_mdio_pins_default: icssg2-mdio-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+ AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+ >;
+ };
+
+ icssg2_rgmii_pins_default: icssg2-rgmii-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+ AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+ AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+ AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+ AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+ AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+ AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+ AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+ AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+ AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+ AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+ AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+ AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+ AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+ AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+ AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+ AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+ AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+ AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+ AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+ >;
+ };
};
&main_pmx1 {
@@ -618,3 +723,29 @@ &cpsw_port1 {
&dss {
status = "disabled";
};
+
+&icssg0_mdio {
+ status = "disabled";
+};
+
+&icssg1_mdio {
+ status = "disabled";
+};
+
+&icssg2_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_mdio_pins_default>;
+
+ icssg2_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg2_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
--
2.34.1
Powered by blists - more mailing lists