[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAB9BWhdYUcnkwqFQz+e8dK-_Vv6on=Poo8QmKrk55c+zrQ4-mw@mail.gmail.com>
Date: Thu, 10 Aug 2023 15:03:21 +0800
From: wenhua lin <wenhua.lin1994@...il.com>
To: Andy Shevchenko <andy@...nel.org>
Cc: Wenhua Lin <Wenhua.Lin@...soc.com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
Xiongpeng Wu <xiongpeng.wu@...soc.com>
Subject: Re: [PATCH 2/3] gpio: sprd: In the sleep state, the eic dbnc clk must
be forced open
On Tue, Aug 8, 2023 at 9:23 PM Andy Shevchenko <andy@...nel.org> wrote:
>
> On Tue, Aug 08, 2023 at 11:31:30AM +0800, Wenhua Lin wrote:
> > In the sleep state, Eic dbnc has no clock and the clk enable
>
> Comma is not needed here.
Hi Andy:
We will make changes in patch v2.
Thanks
Wernhua.Lin
>
> > of dbnc needs to be forced open, so that eic can wake up normally.
>
> ...
>
> > +#define SPRD_EIC_DBNC_FORCE_CLK 0x8000
>
> BIT(15) ?
Hi Andy:
Yes, The bit15 is clock of dbnc forced open
Thanks
Wernhua.Lin
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
Powered by blists - more mailing lists