linux-kernel - [PATCH v1] clk: starfive: jh7110-sys: Set PLL0 rate to 1.5GHz

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230811033631.160912-1-xingyu.wu@starfivetech.com>
Date:   Fri, 11 Aug 2023 11:36:31 +0800
From:   Xingyu Wu <xingyu.wu@...rfivetech.com>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Emil Renner Berthing <emil.renner.berthing@...onical.com>
CC:     Conor Dooley <conor@...nel.org>,
        Hal Feng <hal.feng@...rfivetech.com>,
        Xingyu Wu <xingyu.wu@...rfivetech.com>,
        <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>
Subject: [PATCH v1] clk: starfive: jh7110-sys: Set PLL0 rate to 1.5GHz

Set PLL0 rate to 1.5GHz. Change the parent of cpu_root clock
and the divider of cpu_core before setting.

Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
---

Hi Stephen and Emil,

This patch sets PLL0 rate to 1.5GHz. In order not to affect the cpu 
operation, the cpu_root's parent clock should be changed first.
And the divider of the cpu_core clock should be set to 2 so they
won't crash when setting 1.5GHz without voltage regulation.

This patch is based on linux-next which has merge PLL driver on
StarFive JH7110 SoC.

Thanks,
Xingyu Wu

---
 .../clk/starfive/clk-starfive-jh7110-sys.c    | 47 ++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
index 3884eff9fe93..b6b9e967dfc7 100644
--- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
+++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
@@ -501,7 +501,52 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	return jh7110_reset_controller_register(priv, "rst-sys", 0);
+	ret = jh7110_reset_controller_register(priv, "rst-sys", 0);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set PLL0 rate to 1.5GHz
+	 * In order to not affect the cpu when the PLL0 rate is changing,
+	 * we need to switch the parent of cpu_root clock to osc clock first,
+	 * and then switch back after setting the PLL0 rate.
+	 */
+	pllclk = clk_get(priv->dev, "pll0_out");
+	if (!IS_ERR(pllclk)) {
+		struct clk *osc = clk_get(&pdev->dev, "osc");
+		struct clk *cpu_root = priv->reg[JH7110_SYSCLK_CPU_ROOT].hw.clk;
+		struct clk *cpu_core = priv->reg[JH7110_SYSCLK_CPU_CORE].hw.clk;
+
+		if (IS_ERR(osc)) {
+			clk_put(pllclk);
+			return PTR_ERR(osc);
+		}
+
+		/*
+		 * CPU need voltage regulation by CPUfreq if set 1.5GHz.
+		 * So in this driver, cpu_core need to be set the divider to be 2 first
+		 * and will be 750M after setting parent.
+		 */
+		ret = clk_set_rate(cpu_core, clk_get_rate(cpu_core) / 2);
+		if (ret)
+			goto failed_set;
+
+		ret = clk_set_parent(cpu_root, osc);
+		if (ret)
+			goto failed_set;
+
+		ret = clk_set_rate(pllclk, 1500000000);
+		if (ret)
+			goto failed_set;
+
+		ret = clk_set_parent(cpu_root, pllclk);
+
+failed_set:
+		clk_put(pllclk);
+		clk_put(osc);
+	}
+
+	return ret;
 }
 
 static const struct of_device_id jh7110_syscrg_match[] = {
-- 
2.25.1