[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAB9BWhcfS8mYYj+iDaT07M6mQdTiZk+hVs5XPwxpiix01_wjeA@mail.gmail.com>
Date: Fri, 11 Aug 2023 15:52:13 +0800
From: wenhua lin <wenhua.lin1994@...il.com>
To: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Andy Shevchenko <andy@...nel.org>,
Wenhua Lin <Wenhua.Lin@...soc.com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
Xiongpeng Wu <xiongpeng.wu@...soc.com>
Subject: Re: [PATCH 3/3] gpio: sprd: Add clear interrupt
On Thu, Aug 10, 2023 at 5:57 PM Andy Shevchenko
<andy.shevchenko@...il.com> wrote:
>
> On Thu, Aug 10, 2023 at 10:27 AM wenhua lin <wenhua.lin1994@...il.com> wrote:
> > On Tue, Aug 8, 2023 at 9:25 PM Andy Shevchenko <andy@...nel.org> wrote:
> > > On Tue, Aug 08, 2023 at 11:31:44AM +0800, Wenhua Lin wrote:
> > > > Clear interrupt after set the interrupt type.
> > >
> > > Why?
> > >
> > > Can't it be done in the ->init_hw() callback of GPIO IRQ chip?
> >
> > Hi Andy:
> > The initialization state of EIC is high-level trigger. If the external
> > level is high and the interrupt condition is met,
> > EIC has a latch function. If the module registers the eic interrupt,
> > an interrupt will be generated immediately
> > as soon as the eic interrupt is enabled. To solve this problem, our
> > processing method is to clear the interrupt
> > once when setting the interrupt trigger type, in order to avoid that
> > this interrupt is the last interrupt.
>
> Obvious question, isn't this needed to be added to ->init_hw() as well?
In the ->init_hw() function, the sprd_gpio_irq_ack interface will be called
to clear the interrupt, and there is no need to add it repeatedly
>
> --
> With Best Regards,
> Andy Shevchenko
Powered by blists - more mailing lists