linux-kernel - Re: [PATCH 3/3] gpio: sprd: Add clear interrupt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Aug 2023 12:56:29 +0300
From:   Andy Shevchenko <andy.shevchenko@...il.com>
To:     wenhua lin <wenhua.lin1994@...il.com>
Cc:     Andy Shevchenko <andy@...nel.org>,
        Wenhua Lin <Wenhua.Lin@...soc.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Orson Zhai <orsonzhai@...il.com>,
        Baolin Wang <baolin.wang@...ux.alibaba.com>,
        Chunyan Zhang <zhang.lyra@...il.com>,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        Xiongpeng Wu <xiongpeng.wu@...soc.com>
Subject: Re: [PATCH 3/3] gpio: sprd: Add clear interrupt

On Thu, Aug 10, 2023 at 10:27 AM wenhua lin <wenhua.lin1994@...il.com> wrote:
> On Tue, Aug 8, 2023 at 9:25 PM Andy Shevchenko <andy@...nel.org> wrote:
> > On Tue, Aug 08, 2023 at 11:31:44AM +0800, Wenhua Lin wrote:
> > > Clear interrupt after set the interrupt type.
> >
> > Why?
> >
> > Can't it be done in the ->init_hw() callback of GPIO IRQ chip?
>
> Hi Andy:
> The initialization state of EIC is high-level trigger. If the external
> level is high and the interrupt condition is met,
> EIC has a latch function. If the module registers the eic interrupt,
> an interrupt will be generated immediately
>  as soon as the eic interrupt is enabled. To solve this problem, our
> processing method is to clear the interrupt
>  once when setting the interrupt trigger type, in order to avoid that
> this interrupt is the last interrupt.

Obvious question, isn't this needed to be added to ->init_hw() as well?

-- 
With Best Regards,
Andy Shevchenko