[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e49fb304-bd5d-5013-815f-5933a2a170c4@ti.com>
Date: Fri, 11 Aug 2023 16:48:28 +0530
From: Md Danish Anwar <a0501179@...com>
To: Conor Dooley <conor@...nel.org>
CC: MD Danish Anwar <danishanwar@...com>, Suman Anna <s-anna@...com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <vigneshr@...com>,
<srk@...com>, <nm@...com>
Subject: Re: [PATCH] dt-bindings: remoteproc: pru: Add Interrupt property
Hi Conor,
On 08/08/23 4:58 pm, Conor Dooley wrote:
> On Tue, Aug 08, 2023 at 04:30:32PM +0530, Md Danish Anwar wrote:
>> On 08/08/23 4:18 pm, Conor Dooley wrote:
>>> On Tue, Aug 08, 2023 at 03:14:31PM +0530, Md Danish Anwar wrote:
>>>> On 07/08/23 8:09 pm, Conor Dooley wrote:
>>>>> On Mon, Aug 07, 2023 at 04:38:36PM +0530, MD Danish Anwar wrote:
>>>>>> Add interrupts and interrupt-names protperties for PRU and RTU cores.
>>>>>>
>>>>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>>>>> ---
>>>>>> .../bindings/remoteproc/ti,pru-rproc.yaml | 22 +++++++++++++++++++
>>>>>> 1 file changed, 22 insertions(+)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>>>> index cd55d80137f7..6970316943bb 100644
>>>>>> --- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>>>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
>>>>>> @@ -66,6 +66,16 @@ properties:
>>>>>> Should contain the name of the default firmware image
>>>>>> file located on the firmware search path.
>>>>>>
>>>>>> + interrupts:
>>>>>> + maxItems: 1
>>>>>> + description:
>>>>>> + Interrupt specifiers enable the virtio/rpmsg communication between MPU
>>>>>> + and the PRU/RTU cores.
>>>>>> +
>>>>>> + interrupt-names:
>>>>>> + items:
>>>>>> + - const: vring
>>>>>> +
>>>>>> if:
>>>>>> properties:
>>>>>> compatible:
>>>>>> @@ -171,6 +181,9 @@ examples:
>>>>>> <0x22400 0x100>;
>>>>>> reg-names = "iram", "control", "debug";
>>>>>> firmware-name = "am65x-pru0_0-fw";
>>>>>> + interrupt-parent = <&icssg0_intc>;
>>>>>> + interrupts = <16 2 2>;
>>>>>> + interrupt-names = "vring";
>>>>>> };
>>>>>
>>>>> These examples would probably be more helpful if they used the
>>>>> appropriate defines, no?
>>>>>
>>>>
>>>> PRUSS Interrupt controller doesn't have any appropriate defines. This doesn't
>>>> use GIC so defines from arm-gic.h can not be used here. These are specific to
>>>> PRUSS INTC.
>>>
>>> I was deliberately vague in case the gic stuff applied too, but my main
>>> question was about the standard defines used for interrupt types.
>>>
>>
>> There are no standard defines for these interrupt types. However I can create a
>> new .h file defining all the three interrupt cells and their values for both
>> PRU and RTU cores if you think that is required. Otherwise we can go with
>> hardcoded values.
>>
>> Please let me know what you think should be done here.
>
> It'd be good to reference to the documentation for the cells, I don't
> think adding a header is necessary here.
>
How should I reference to the documentation for the cells?
Should I just add the details of cells in description of interrupt property here.
interrupts:
maxItems: 1
description:
Interrupt specifiers enable the virtio/rpmsg communication between MPU
and the PRU/RTU cores. The value of the interrupts should be the PRU
System event number [cell 1], PRU channel [cell 2] and PRU host_event
(target) [cell 3].
Please let me know if this looks OK to you.
> Thanks,
> Conor.
--
Thanks and Regards,
Danish.
Powered by blists - more mailing lists