[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d9a8e265-8862-0fac-24ae-989293bc4d12@linaro.org>
Date: Tue, 15 Aug 2023 22:31:27 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Stephan Gerhold <stephan@...hold.net>, Pavel Machek <pavel@....cz>,
Lee Jones <lee@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Nikita Travkin <nikita@...n.ru>, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
"Lin, Meng-Bo" <linmengbo0689@...tonmail.com>
Subject: Re: [PATCH v3 2/3] dt-bindings: leds: Document pull-up supply for
interrupt and I2C
On 15/08/2023 19:21, Stephan Gerhold wrote:
> Since the interrupt and I2C lines of AW2013 operate in open drain low
> active mode a pull-up supply is needed for correct operation.
> Unfortunately there is no ideal place to describe it in the DT: The
> pull-up needed for the I2C lines could be described on the I2C bus.
> However, the pull-up needed for the interrupt line belongs neither
> directly to the interrupt controller nor to AW2013. Since the AW2013
> driver will be typically in control of the power management and
> interrupt masking it makes more sense to describe it inside the AW2013
> device tree node.
>
> Add it to the AW2013 DT schema together with a comment that makes it
> clear what exactly it represents.
>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Best regards,
Krzysztof
Powered by blists - more mailing lists