[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230816173116.1176-3-wsa+renesas@sang-engineering.com>
Date: Wed, 16 Aug 2023 19:31:14 +0200
From: Wolfram Sang <wsa+renesas@...g-engineering.com>
To: linux-renesas-soc@...r.kernel.org
Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>,
Johan Hovold <johan@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding
Needed to enable this chip on a Renesas KingFisher board. Description
copied over from the Mediatek driver which already supports it.
Signed-off-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
---
Changes since v1:
* dropped obvious description (Thanks, Geert!)
* added missing include (Thanks, Krzysztof and Rob!)
I build tested the change this time.
Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 4835a280b3bf..8e97e475613f 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -41,6 +41,9 @@ properties:
description: >
Backup voltage regulator
+ reset-gpios:
+ maxItems: 1
+
required:
- compatible
- vcc-supply
@@ -49,10 +52,12 @@ unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
serial {
gnss {
compatible = "u-blox,neo-8";
v-bckp-supply = <&gnss_v_bckp_reg>;
vcc-supply = <&gnss_vcc_reg>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
--
2.35.1
Powered by blists - more mailing lists