linux-kernel - [PATCH 4/5] arm64: dts: imx8: update lpuart[0..3] irq number

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230822155333.2261262-5-Frank.Li@nxp.com>
Date:   Tue, 22 Aug 2023 11:53:32 -0400
From:   Frank Li <Frank.Li@....com>
To:     frank.li@....com, shawnguo@...nel.org, joy.zou@....com,
        shenwei.wang@....com, sherry.sun@....com
Cc:     clin@...e.com, conor+dt@...nel.org, devicetree@...r.kernel.org,
        eagle.zhou@....com, festevam@...il.com, imx@...ts.linux.dev,
        kernel@...gutronix.de, krzysztof.kozlowski+dt@...aro.org,
        leoyang.li@....com, linux-arm-kernel@...ts.infradead.org,
        linux-imx@....com, linux-kernel@...r.kernel.org,
        pierre.gondois@....com, robh+dt@...nel.org, s.hauer@...gutronix.de
Subject: [PATCH 4/5] arm64: dts: imx8: update lpuart[0..3] irq number

Original irq number combined UART irq and DMA irq. These doesn't match
uart driver and dma engine's expection.

Update to the irq numbers, which just uart can trigger.

Signed-off-by: Frank Li <Frank.Li@....com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 92ed02e6048c..f26f8ee5d2f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -86,7 +86,7 @@ lpspi3: spi@...30000 {
 
 	lpuart0: serial@...60000 {
 		reg = <0x5a060000 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -98,7 +98,7 @@ lpuart0: serial@...60000 {
 
 	lpuart1: serial@...70000 {
 		reg = <0x5a070000 0x1000>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -112,7 +112,7 @@ lpuart1: serial@...70000 {
 
 	lpuart2: serial@...80000 {
 		reg = <0x5a080000 0x1000>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
@@ -126,7 +126,7 @@ lpuart2: serial@...80000 {
 
 	lpuart3: serial@...90000 {
 		reg = <0x5a090000 0x1000>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
-- 
2.34.1