linux-kernel - RE: [PATCH v6 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <SN7PR12MB72019898876F049A932209038BE0A@SN7PR12MB7201.namprd12.prod.outlook.com>
Date:   Mon, 28 Aug 2023 09:09:04 +0000
From:   "Havalige, Thippeswamy" <thippeswamy.havalige@....com>
To:     Bjorn Helgaas <helgaas@...nel.org>
CC:     "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "bhelgaas@...gle.com" <bhelgaas@...gle.com>,
        "lpieralisi@...nel.org" <lpieralisi@...nel.org>,
        "robh@...nel.org" <robh@...nel.org>, "kw@...ux.com" <kw@...ux.com>,
        "Simek, Michal" <michal.simek@....com>,
        "krzysztof.kozlowski+dt@...aro.org" 
        <krzysztof.kozlowski+dt@...aro.org>,
        "Gogada, Bharat Kumar" <bharat.kumar.gogada@....com>
Subject: RE: [PATCH v6 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver

Hi Bjorn,

Thanks, ll take all your comments and update them in next patch.

Regards,
Thippeswamy H

> -----Original Message-----
> From: Bjorn Helgaas <helgaas@...nel.org>
> Sent: Tuesday, August 22, 2023 1:44 AM
> To: Havalige, Thippeswamy <thippeswamy.havalige@....com>
> Cc: linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; linux-
> pci@...r.kernel.org; devicetree@...r.kernel.org; bhelgaas@...gle.com;
> lpieralisi@...nel.org; robh@...nel.org; kw@...ux.com; Simek, Michal
> <michal.simek@....com>; krzysztof.kozlowski+dt@...aro.org; Gogada,
> Bharat Kumar <bharat.kumar.gogada@....com>
> Subject: Re: [PATCH v6 3/3] PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
> 
> On Fri, Aug 18, 2023 at 03:05:07PM +0530, Thippeswamy Havalige wrote:
> > Add support for Xilinx XDMA Soft IP core as Root Port.
> >
> > The Zynq UltraScale+ MPSoCs devices support XDMA soft IP module in
> > programmable logic.
> >
> > The integrated XDMA soft IP block has integrated bridge function that
> > can act as PCIe Root Port.
> >
> > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@....com>
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@....com>
> > ---
> > changes in v6:
> > - Replaced chained irq's with regular interrupts.
> 
> Thanks a million for working this out!
> 
> Trivial comments below, wait a couple days before reposting in case there are
> other comments.
> 
> > +static inline bool xilinx_pl_dma_pcie_link_up(struct pl_dma_pcie
> > +*port) {
> > +	return (pcie_read(port, XILINX_PCIE_DMA_REG_PSCR) &
> > +		XILINX_PCIE_DMA_REG_PSCR_LNKUP) ? 1 : 0;
> 
> This function returns bool, so I think true/false would be more appropriate
> than 1/0.
> 
> > +static bool xilinx_pl_dma_pcie_valid_device(struct pci_bus *bus,
> > +					    unsigned int devfn)
> > +{
> > +	struct pl_dma_pcie *port = bus->sysdata;
> > +
> > +	/* Check if link is up when trying to access downstream ports */
> > +	if (!pci_is_root_bus(bus)) {
> > +		/*
> > +		 * Checking whether link is up here is a last line of defence,
> > +		 * if the link goes down after we check for link-up, we have a
> > +		 * problem: if a PIO request is initiated while link-down, the
> > +		 * whole controller hangs, and even after link comes up again,
> > +		 * previous PIO requests won't work, and a reset of the whole
> > +		 * PCIe controller is needed. Henceforth we need link-up
> check
> > +		 * here to avoid sending PIO request when link is down. This
> > +		 * check is racy by definition and does not make controller
> hang
> > +		 * if the link goes down after this check is performed.
> 
> This comment doesn't make sense to me.  "If PIO request initiated while link-
> down, controller hangs ... This check is racy and does not make controller
> hang if link goes down."  Which is it?
> 
> My *guess* is that this check narrows the window but doesn't close it, so if
> xilinx_pl_dma_pcie_link_up() finds the link up, but the link goes down before
> pci_generic_config_read() initiates the PIO request, the controller hangs, and
> a reset is required.
> 
> > +		 */
> > +		if (!xilinx_pl_dma_pcie_link_up(port))
> > +			return false;
> > +	} else if (devfn > 0)
> > +		/* Only one device down on each root port */
> > +		return false;
> > +
> > +	return true;
> > +}
> 
> > +/* INTx error interrupts are Xilinx controller specific interrupt,
> > +used to
> > + * notify user about error's such as cfg timeout, slave unsupported
> > +requests,
> 
> s/error's/errors/
> 
> > + * fatal and non fatal error etc.
> 
> > +		err = devm_request_irq(dev, irq,
> xilinx_pl_dma_pcie_intr_handler,
> > +				       IRQF_SHARED | IRQF_NO_THREAD,
> intr_cause[i].sym, port);
> 
> Rewrap to fit in 80 columns.
> 
> > +	/* Needed for MSI DECODE MODE */
> > +	pcie_write(port, XILINX_PCIE_DMA_IDR_ALL_MASK,
> XILINX_PCIE_DMA_REG_MSI_LOW_MASK);
> > +	pcie_write(port, XILINX_PCIE_DMA_IDR_ALL_MASK,
> > +XILINX_PCIE_DMA_REG_MSI_HI_MASK);
> 
> Rewrap.
> 
> Bjorn